Electrolux TC145 Refrigerator User Manual
- June 12, 2024
- Electrolux
Table of Contents
TC145 Refrigerator
User Manual TC145
User Manual
www.electrolux.com
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
****General information and tips
Environmental information
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied
instructions. The manufacturer is not responsible for any injuries or damage
that are the result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future reference.
1.1 Children and vulnerable people safety
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
- This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
- Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
- Children should be supervised to ensure that they do not play with the appliance.
- Children shall not carry out cleaning and user maintenance of the appliance without supervision. • Keep all packaging away from children and dispose of it appropriately.
1.2 General Safety
-
This appliance is for storing food and baverages only.
-
This appliance is designed for single household domestic use in an indoor environment.
-
This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
-
To avoid contamination of food respect the following instructions:
– do not open the door for long periods;
– clean regularly surfaces that can come in contact with food and accessible drainage systems;
– store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food. -
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
-
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
WARNING: Do not damage the refrigerant circuit.
-
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
-
Do not use water spray and steam to clean the appliance.
-
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
-
When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
-
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Follow the installation instructions supplied with the appliance.
- Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
- Make sure the air can circulate around the appliance.
- At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
- Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
- Do not install the appliance close to radiators or cookers, ovens or hobs.
- Do not expose the appliance to the rain.
- Do not install the appliance where there is direct sunlight.
- Do not install this appliance in areas that are too humid or too cold.
- When you move the appliance, lift it by the front edge to avoid scratching the floor.
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING!
Do not use multi-plug adapters and extension cables.
-
The appliance must be earthed.
-
Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
-
Always use a correctly installed shockproof socket.
-
Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the electrical components. -
The mains cable must stay below the level of the mains plug.
-
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
-
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
2.3 Use
WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a
high level of environmental compatibility. Be careful not to cause damage to
the refrigerant circuit containing isobutane.
- Do not change the specification of this appliance.
- Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
- If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
- Do not let hot items to touch the plastic parts of the appliance.
- Do not store flammable gas and liquid in the appliance.
- Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
- Do not touch the compressor or the condenser. They are hot.
- Do not place unpacked food on the appliance.
2.4 Internal lighting
WARNING!
Risk of electric shock.
- Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
2.5 Care and cleaning
WARNING!
Risk of injury or damage to the appliance.
- Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
- This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
2.6 Service
-
To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
-
Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
-
The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets.
Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models. -
Door gaskets will be available for 10 years after the model has been discontinued.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Remove the door to prevent children and pets to be closed inside of the appliance.
- The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
- The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
- Do not cause damage to the part of the cooling unit that is near the heat exchanger.
3.1 Dimensions
Overall dimensions ¹
H1 | mm | 845 |
---|---|---|
W1 | mm | 604 |
D1 | mm | 576 |
¹ the height, width and depth of the appliance without the handle
Space required in use ²
H2 | mm | 945 |
---|---|---|
W2 | mm | 804 |
D2 | mm | 689 |
² the height, width and depth of the appliance including the handle, plus the
space necessary for free circulation of the cooling air
Overall space required in use ³
H2 | mm | 945 |
---|---|---|
W3 | mm | 1193 |
D3 | mm | 1209 |
³ the height, width and depth of the appliance including the handle, plus the
space necessary for free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum angle permitting removal of all
internal equipment
3.2 Location
This appliance is not intended to be used as a built-in appliance.
In case of different installation from freestanding respecting space required
in use dimensions, the appliance will function correctly but energy
consumption might increase slightly.
To ensure appliance’s best functionality, you should not install the appliance
in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air can circulate freely
around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
To ensure best performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of the cabinet
shall be maintained. Ideally, however, the appliance should not be positioned
below overhanging wall units. One or more adjustable feet at the base of the
cabinet ensure that the appliance stands level.
CAUTION!
If you position the appliance against the wall, use back spacers provided or
keep the minimum distance indicated in the installation instructions.
CAUTION!
If you install the appliance next to a wall, refer to the installation
instructions to understand the minimum distance between the wall and the side
of the appliance where door hinges are to provide enough space to open the
door when the internal equipment is removed (e.g. when cleaning).
This appliance is intended to be used at ambient temperature ranging from 10°C
to 38°C.
The correct operation of the appliance can only be guaranteed within the
specified temperature range.
If you have any doubts regarding where to install the appliance, please
turn to the vendor, to our customer service or to the nearest Authorised
Service Centre.
**** It must be possible to disconnect the appliance from the mains power
supply. The plug must therefore be easily accessible after installation.
3.3 Electrical connection
- Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
- The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
- The manufacturer declines all responsibility if the above safety precautions are not observed.
- This appliance complies with the E.E.C. Directives.
3.4 Levelling
When placing the appliance make sure that it stands level. This can be
achieved by two adjustable feet at the bottom in front.
3.5 Door reversibility
**WARNING!**
Before carrying out any operations, remove the plug from the power socket.
- Make sure the appliance stands upright.
- Open the door and remove the door equipment. Refer to the “Daily Use” chapter. Close the door.
- Unscrew the screws on the back of the top cover.
- Lift the top cover and place it on a soft surface.
- Unscrew the 4 screws that connect the upper hinge. Put the upper hinge in a safe place together with the screws.
- Lift the door and put it on a soft surface.
- Tilt the appliance carefully on a soft foam packaging or similar material to avoid any damage to the back of the appliance and the floor.
- Unscrew the screws of the bottom hinge and adjustable feet.
- Install the pin in the opposite hole of the hinge.
- Screw the bottom hinge on the other side of the appliance.
- Install the rubber support on the side with no hinge.
- Fit the door on the lower hinge making sure the hinge pin enters the door bottom hole.
- Install the upper hinge on the opposite side of the appliance. Fit the upper hinge pin into the door upper hole. Tighten the screws.
- Screw the remaining 2 screws on the top side of the appliance with no hinge.
- Place the top cover on the appliance and tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting the appliance to the power supply.
3.6 Installation of a door handle
If there is a door handle separately provided in a bag, you can install it as
follows:
- Remove the screws from the holes on the side of the door. Keep or install the screw covers on the side with a door hinge.
- Match the handle holes with the holes in the door and screw the handle with screws previously removed.
OPERATION
4.1 Switching on
- Insert the plug into the wall socket.
- Turn the temperature regulator clockwise to a medium setting.
4.2 Switching off
To turn off the appliance, turn the temperature regulator to the “0” position.
You can also unplug the appliance.
4.3 Temperature regulation
The temperature is regulated automatically. However, you can set a temperature
inside the appliance yourself.
Choose the setting keeping in mind that the temperature inside the appliance
depends on:
- room temperature,
- frequency of opening the door,
- quantity of food stored,
- appliance location.
A medium setting is generally the most suitable one.
To operate the appliance:
- Turn the temperature regulator clockwise to obtain a lower temperature inside the appliance.
- Turn the temperature regulator counterclockwise to obtain a higher temperature inside the appliance.
Setting “0” means that the appliance is switched off.
DAILY USE
CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.
5.1 Removing and installing the door shelf
To remove the door shelf:
- Hold the left side of the shelf.
- Lift the right side of the shelf until it comes free from the fastener.
- Lift the left side of the shelf and remove it.
To put the shelf back in:
- Place the shelf flat on the door.
- Push two sides of the shelf downwards at the same time so that the shelf fits both fasteners.
5.2 Movable shelves
The walls of the refrigerator compartment are equipped with a series of
runners so that the shelves can be positioned as desired. ** To
ensure correct air circulation, do not move the glass shelf above the
vegetable drawer.
5.3 Vegetable drawer**
There is a special drawer in the bottom part of the appliance suitable for
storage of fruits and vegetables.
HINTS AND TIPS
6.1 Hints for energy saving
- Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
- Do not open the door frequently or leave it open longer than necessary.
- Do not set too high temperature to save energy unless it is required by the characteristics of the food.
- If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
- Ensure a good ventilation. Do not over the ventilation grilles or holes.
6.2 Hints for fresh food refrigeration
-
The medium temperature setting ensures good preservation of fresh food.
Higher temperature setting inside the appliance may lead to shorter shelf life of food. -
Cover the food with packaging to preserve its freshness and aroma.
-
Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
-
To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
-
It is recommended to defrost the food inside the fridge.
-
Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
-
To prevent food waste the new stock of food should always be placed behind the old one.
6.3 Hints for food refrigeration
- Fresh food compartment is the one marked (on the rating plate) with .
- Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
- It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
- Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
- Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
- Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
- Always refer to the expiry date of the products to know how long to keep them.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 Cleaning the interior
Before using the appliance for the first time, the interior and all internal
accessories should be washed with lukewarm water and some neutral soap to
remove the typical smell of a brandnew product, then dried thoroughly.
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as
they will damage the finish.
** CAUTION!
The accessories and parts of the appliance are not suitable for washing in a
dishwasher.
7.2 Periodic cleaning**
The equipment has to be cleaned regularly:
- Clean the inside and accessories with lukewarm water and some neutral soap.
- Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
- Clean the condenser with a brush at least twice a year.
- Clean the evaporator tray periodically to remove accumulated water.
- Rinse and dry thoroughly.
7.3 Defrosting of the fridge
The defrost water automatically drains out through a trough into the
evaporative tray at the back of the appliance, over the motor compressor.
7.4 Periods of non-operation
When the appliance is not in use for long periods, take the following
precautions:
- Disconnect the appliance from electricity supply.
- Remove all food.
- Clean the appliance and all accessories.
- Leave the door open to prevent unpleasant smells.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if…
Problem | Possible cause | Solution |
---|---|---|
The appliance does not operate. | The appliance is switchedoff. | Switch on the |
appliance.
The mains plug is not connected to the mains socket correctly.| Connect the
mains plug to the mains socket correctly.
There is no voltage in the mains socket.| Connect a different electrical
appliance to the mains socket. Contact a qualified
electrician.
The appliance is noisy.| The appliance is not supported properly.| Check if
the appliance stands stable.
The compressor operates
continually.| Temperature is set incorrectly.| Refer to “Operation” chapter.
Many food products were put in at the same time.| Wait a few hours and then
check the temperature again.
The room temperature is too high.| Refer to “Installation” chapter.
Food products placed in the appliance were too warm.| Allow food products to
cool to room temperature before storing.
The door is not closed cor‐
rectly.| Refer to “Closing the door” section.
The Super Freeze function
is switched on.| Refer to “Super Freeze function” section.
The compressor does not
start immediately after
pressing the “Super
Freeze”, or after changing
the temperature.| The compressor starts after a period of time.| This is
normal, no error has occurred.
Door is misaligned or inter‐
feres with ventilation grill.| The appliance is not levelled.| Refer to
installation instructions.
Door does not open easily.| You attempted to re-open the door immediately
after
closing.| Wait a few seconds between closing and re-opening of the door.
The lamp does not work.| The lamp is in stand-by mode.| Close and open the
door.
The lamp is defective.| Contact the nearest Authorized Service Centre.
There is too much frost
and ice.| The door is not closed correctly.| Refer to “Closing the door”
section.
The gasket is deformed or dirty.| Refer to “Closing the door” section.
Food products are not wrapped properly.| Wrap the food products better.
Temperature is set incorrectly.| Refer to “Operation” chapter.
Appliance is fully loaded and is set to the lowest
temperature.| Set a higher temperature.
Refer to “Operation” chapter.
Temperature set in the appliance is too low and the
ambient temperature is too high.| Set a higher temperature.
Refer to “Operation” chapter.
Water flows on the rear
plate of the refrigerator.| During the automatic defrosting process, frost
melts on the rear plate.| This is correct. Dry the water with a soft cloth.
There is too much con‐
densed water on the rear
wall of the refrigerator.| Door was opened too frequently.| Open the door only
when necessary.
Door was not closed completely.| Make sure the door is closed completely.
Stored food was not wrapped.| Wrap food in suitable packaging before storing
it in the appliance.
Water flows inside the re‐
frigerator.| Food products prevent the water from flowing into the
water collector.| Make sure that food products do not touch the rear plate.
The water outlet is clogged.| Clean the water outlet.
Water flows on the floor.| The melting water outlet is not connected to the
evaporative tray above the compressor.| Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set.| The Super Freeze function is switched on.| Switch
off the Super Freeze function manually, or wait until the function
deactivates automatically to set the temperature. Re‐ fer to “Super Freeze
function” section.
The temperature in the ap‐
pliance is too low/too high.| The temperature is not set
correctly.| Set a higher/lower temperature.
The door is not closed correctly.| Refer to “Closing the door” section.
The food products’ temperature is too high.| Let the food products temperature
decrease to room temperature before storage.
Many food products are stored at the same time.| Store less food products at
the same time.
The thickness of the frost is greater than 4-5 mm.| Defrost the appliance.
The door has been openedoften.| Open the door only if necessary.
The Super Freeze function is switched on.| Refer to “Super Freeze function”
section.
** If the advice does not lead to the desired result, call the nearest
Authorized Service Centre.
8.2 Replacing the lamp
The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your
Authorised Service Centre.
8.3 Closing the door**
- Clean the door gaskets.
- If necessary, adjust the door. Refer to “Installation” chapter.
- If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.
NOISES
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
Voltage | 220-240 V |
---|---|
Frequency | 50 Hz |
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
CH GUARANTEE
Customer Service Centres
Industriestrasse 10
5506 Mägenwil| Schlossstrasse 1
4133 Pratteln
---|---
Morgenstrasse 131
3018 Bern| Comercialstrasse 19
7000 Chur
Langgasse 10
9008 St. Gallen| Le Trési 6
1028 Préverenges
Am Mattenhof 4a/b
6010 Kriens| Via Violino 11
6928 Manno
Service-Helpline 0848 848 111
service@electrolux.ch
Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a two-year guarantee from the date of
purchase or delivery to the consumer (with a guarantee certificate, invoice or
sales receipt serving as proof). The guarantee covers the costs of materials,
labour and travel. The guarantee will lapse if the operating instructions and
conditions of use are not adhered to, if the product is incorrectly installed,
or in the event of damage caused by external influences, force majeure,
intervention by third parties or the use of non-genuine components.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol ****. Put the packaging in relevant
containers to recycle it. Help protect the environment and human health by
recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the product to your local recycling facility
or contact your municipal office.
For Switzerland:
Where should you take your old equipment?
Anywhere that sells new equipment or hand it in to official SENS collection
points or official SENS recycling firms.
The list of official SENS collection points can be found at
www.erecycling.ch
www.electrolux.com/shop
804183142-C-492021
References
- Buy Electrolux Spare Parts | Electrolux Australia
- Electrolux
- SENS eRecycling – Stiftung für Recycling von Elektro- und Elektronikgeräten
- Register Your Appliance – Product Registration – Electrolux
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>