Eyedro E5B-M-P2 Pulse Monitoring System User Guide

Eyedro E5B-M-P2 Pulse Monitoring System

Product Information

• Product Name: Pulse Monitoring System with Wireless Mesh Connectivity
• Model: E5B-M-P2
• Intended Use: Indoor use only
• Pulse Meter Output Compatibility: Form A (KY) dry contact pulses, 5V DC wetting value
• Rising or Falling Edge Detection: Default is rising edge, Minimum pulse width is 5ms, Maximum frequency is 100Hz
• Higher Wetting Value Option: A higher wetting value (up to 24V) can be achieved by connecting a separate DC power supply (not provided) to input port C of the Eyedro Pulse Monitor module. The mating connector for port C is a 1.65mm (i.d) x 3.5mm (o.d) x 9mm (length) barrel plug with center pin positive.
• Online Support Resources: Visit eyedro.com/support for an online product setup wizard, user manuals, videos, and various support resources
• Warranty: Limited One Year Warranty. Full warranty details are available in the Product Guide at eyedro.com/support.

Product Usage Instructions

1. 1. Verify Package Contents:

   • A – 1 Eyedro pulse module
   • B – 2 Pulse interface cables
   • C – 1 5VDC power adapter
2. Install Hardware:

  * Connect the pulse interface cable to the output of the pulse meter.
  * Connect the pulse cables and power adapter to the Eyedro module.
3. Record Serial Number:

Locate the serial number under the barcode on the module and record it for future reference.

1. Create a MyEyedro User Account:
2. Go to my.eyedro.com to create your online account or log in if you already have an existing account.
3. Add the device to your user account by going to Configuration, selecting Devices, and entering the recorded serial number from Step 2.
4. Enjoy! Log into MyEyedro as often as you like to view your electricity consumption.
5. For more details about the MyEyedro cloud service, review the MyEyedro User Guide located at eyedro.com/support.

Before Getting Started

This Quick Start Guide provides very high level installation instructions. Detailed installation instructions are available in the Product Guide at eyedro.com/support

This product is intended for indoor use only

Eyedro Pulse Monitors are intended to interface with the following pulse meter output formats:

• Form A (KY) dry contact pulses
• 5V DC wetting value
• Rising or falling edge detection (default is rising edge)
• Minimum pulse width is 5ms
• Maximum frequency is 100Hz

NOTE: A higher wetting value (up to 24V) can be achieved by connecting a separate DC power supply (not provided) to input port C of the Eyedro Pulse Monitor module. The mating connector for port C is a 1.65mm (i.d) x 3.5mm (o.d) x 9mm (length) barrel plug with center pin positive.

Online Support Resources

• Visit eyedro.com/support for online product setup wizard, user manuals, videos, and various support resources

• eyedro.com/support

Limited One Year Warranty

• Full warranty details are available in the Product Guide at eyedro.com/support.

Important: This product contains no user serviceable components. Do not attempt to open the case of the unit or tamper with the internal components. Doing so will void the product warranty.

Verify Package Contents

Record Serial Number:

• (located under barcode on module)

Install Hardware

1. Connect pulse interface cable to the output of the pulse meter.
   • Black wire of the pulse cable to the K output
   • White wire of the pulse cable to the Y output
2. Connect pulse cables and power adapter to the Eyedro module.

Create a MyEyedro User Account

1. Go to my.eyedro.com to create your online account (or log in if you have an existing account).
2. Add the device to your user account: go to Configuration, select Devices then enter the serial number you recorded in Step 2.
3. ENJOY! Log into MyEyedro as often as you like to view your electricity consumption.
4. For more details about the MyEyedro cloud service, review the MyEyedro User Guide located at eyedro.com/support

Visit eyedro.com for any questions or comments.
We value your feedback.

Copyright © 2023, Eyedro Green Solutions Inc.

References

• Electricity Monitors for Home and Business
• Support - Eyedro
• MyEyedro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>