Srhythm K1 Portable Wireless Speaker User Manual

Srhythm K1 Portable Wireless Speaker

 Safety Instructions

1. Before using the speaker, please read the manual carefully and keep it for future references.
2. Use original or certified cables.
3. Don’ t disassemble.
4. Avoid dropping.
5. Avoid extreme temperatures. Unplug this apparatus during lightning storms or when unused for long periods of time.
6. Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
7. Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
8. Turn off speaker to save power when you do not use the speaker.

Technical Specification

What’s in the Box

• Srhythm Kl Speaker*

• Portable Carry Case*l

• Type-C Charging Cable*l

• 3.5mm Audio Cable*l

• Wrist Extension Strap*l

• Srhythm Quick Start Guide*l

At a Glance

How to Use

1. Turn on/ off
   Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth speaker. LED Indicator Light| Voice prompts
   ---|---
   White and orange lights flash alternately| Bluetooth

Press and hold the Multi-function Button for 5 seconds to turn off the Bluetooth speaker.

*Srhythm Kl will automatically turn off after 10 minutes if no device is connected.

2. Pair with your device
   Step 1: Turn on the Bluetooth speaker, then enter into pairing mode.

Step 2: Keep the speaker and your mobile phone as close as possible during pairing process.
Step 3 : Turn on the Bluetooth on your cell phone. Search for the Bluetooth speaker signal on your phone. Click on “Srhythm Kl”.

3. Connect via Aux
   Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth speaker. LED Indicator Light| Voice prompts
   ---|---
   White and orange lights flash alternately| Bluetooth

Connect the speaker via Aux.

AUX mode is unavailable when out of battery.
When using AUX mode, volume/play/pause control works on the Bluetooth speaker, but previous/next song control must be done from the connected device.

4. Connect via APP
   Download the app via APP Store, Google Play, Srhythm official website or scan the QR code.

|
---|---

a. Turn on the Speaker, and the smartphone’s “Bluetooth” and “Location”.

Step1. Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth speaker.
Step2. Turn on “Bluetooth” and “Location” on smartphone.
b. Follow the instructions in the app to connect the speaker.


Step 1: Register and Log in to your account.
Step 2: Tap”Add device”.
Step 3: Search device, tap “Add” or add manually.
Step 4: Speaker’s information being loaded.
Step 5: Enjoy your speaker via app.

5. Charge the speaker Please use original or certified cables to charge your speaker.

Function Details

| Turn on
---|---
| Turn off
| Play/ Pause
| Volume up
| Next song
| Volume down
| Previous song
| Reset

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

ISED Statement
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>