Eyedro ILM.WIFI.1E Inline WiFi Electricity Monitor User Guide
- June 3, 2024
- Eyedro
Table of Contents
Quick Start Guide
Eyedro Inline Wi-Fi Electricity Monitor
*(ILM.WIFI.1E.)**
Before Getting Started
This insert provides very high level installation instructions. Complete installation instructions and video can be found in the Product Manual located at eyedro.com/support
This product is intended for indoor use only
This product must only be used with approved inlet and outlet power cords and
must be properly rated for the application. Current and/or voltage ratings of
the device or appliance being monitored (connected to the outlet) must not
exceed the ratings of the Eyedro Inline Monitoring product.
Verify Package Contents
| QTY | DESCRIP- |
|---|---|
| 1 | Eyedro ILM.WIFI.1E.* Module (15A model shown) |
| 1 | Inlet Power Cord (NEMA 5-15P to IEC C13 shown) |
| 1 | Outlet Power Cord (IEC C14 to NEMA 5-15R shown) |
Record Serial Number
ILM.NODE.* SN: –
Install Hardware
3.1 Attach the provided outlet adapter cord to the Inline monitor.
3.2 Connect the device or appliance to be monitored to the receptacle side of
the outlet adapter cord.
3.3 Attach the provided inlet power cord to the Inline monitor.
3.4 Plug the power cord into a wall receptacle and proceed to step 4 (Connect Device to the Internet).
Connect Device to the Internet
4.1 Using your phone, tablet or computer, connect to the Wi-Fi network created
by your Eyedro Inline device (2.4G band).
The SSID of the device’s Wi-Fi network will be:
Eyedro [xxx-yyyyy] where xxx-yyyyy is the serial number of the device
(recorded in step 2).
4.2 Open a browser and go to eyedro.com/setup. If you are not automatically
redirected to the setup page (shown below), it may be necessary to enter
192.168.1.1/network
4.3 From the settings page, enter the credentials for the desired network then
choose Connect.
4.4 Reconnect your phone, tablet or computer to its original network.
Create a MyEyedro User Account
5.1 GO ONLINE TO: my.eyedro.com to create your
online account (or login if you have an existing account).
5.2 Add the device to your user account by entering the serial numbers
recorded earlier.
5.3 ENJOY! Login to MyEyedro as often as you like to view your electricity
consumption.
5.4 For more details regarding the MyEyedro service, review the MyEyedro User
Guide located at eyedro.com/support
Visit eyedro.com for any questions
or comments. We value your feedback.
Limited One Year Warranty
Eyedro Green Solutions Inc. warrants this product for a period of one year
from date of purchase for all defects in material and workmanship. Defective
parts may be repaired or replaced, at the discretion of the manufacturer,
during this period.
Important: This product contains no user servicable components. Do not attempt
to open the case of the unit or tamper with the internal components. Doing so
will void the product Warranty.
Full Warranty policy details are available at eyedro.com
Copyright © 2022, Eyedro Green Solutions Inc.
Documents / Resources
|
Eyedro ILM.WIFI.1E Inline WiFi Electricity
Monitor
[pdf] User Guide
ILM.WIFI.1E Inline WiFi Electricity Monitor, ILM.WIFI.1E, Inline WiFi
Electricity Monitor, Inline, WiFi Electricity Monitor, Electricity Monitor,
WiFi Monitor
---|---