Eyedro E5B-M-GW Wireless Mesh Gateway User Guide
- June 11, 2024
- Eyedro
Table of Contents
Eyedro E5B-M-GW Wireless Mesh Gateway
Before Getting Started
This insert provides very high-level installation
instructions. Complete installation instructions can be found at
eyedro.com/support (see Product Manual and
Support videos).
Note: Always use the 5VDC power adapter that was supplied with your model E5B-M-GW gateway.
Verify Package Contents
| Quantity | Description | |
|---|---|---|
| A | 1 | Eyedro gateway module |
| B | 1 | 5VDC power adapter |
| C | 1 | Ethernet cable (3 ft.) |
Record Serial Number
- (located under the barcode on the module)
Install Hardware
- Connect one end of the provided Ethernet cable to the RJ45 port on the Eyedro gateway module, and connect the other end to an open port on your router.
- Connect the 5VDC power adapter to the Eyedro gateway module.
Create a MyEyedro User Account
- Go to my.eyedro.com to create your online account (or log in if you have an existing account).
- Add the device to your user account: go to Configuration, select Devices then enter the serial number you recorded in Step 2.
- ENJOY! Log into MyEyedro as often as you like to view your electricity consumption.
- For more details about the MyEyedro cloud service, review the MyEyedro User Guide located at eyedro.com/support
Limited One Year Warranty
Eyedro Green Solutions Inc. warrants this product for a period of one year from the date of purchase for all defects in material and workmanship. Defective parts may be repaired or replaced at the discretion of the manufacturer during this period.
Full warranty policy details are available at eyedro.com Visit eyedro.com for any questions or comments. We value your feedback.
Copyright © 2022, Eyedro Green Solutions Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>