Eyedro E5B-M-E3 Wireless Mesh Expansion System User Guide

June 9, 2024
Eyedro

Eyedro E5B-M-E3 Wireless Mesh Expansion System

Eyedro-E5B-M-E3-Wireless-Mesh-Expansion-System-PRODUCT

Before Getting Started

This insert provides very high level installa-tion instructions. Complete installation in-structions can be found at eyedro.com/support (see Product Manual and Support videos)
Installation may require the cover of the main electrical panel to be removed while some wires are still electrified. Even when the main breaker has been turned ‘OFF’ certain areas of the panel may still be dangerous and carry the risk of shock, burn, and electrocution. Installation should be performed by a quali-fied electrician. DO NOT attempt installation unless you know where electrified areas within the panel are.

Notes:

  1. Always use the AC power adapter that came with your E5B-M-E3 system.
  2. Do not plug your Eyedro power adapter into an Uninterruptible Power Supply (UPS) as this will result in incorrect measurements.
  3. The AC power adapter must be powered via a circuit that is downstream of the panel where the current sensors are installed.

Limited One Year Warranty

Eyedro Green Solutions Inc. warrants this product for a period of one year from date of purchase for all defects in material and work-manship. Defective parts may be repaired or replaced at the discretion of the manufacturer during this period.
Full warranty policy details are available at Keyedro.com

Verify Package Contents

Eyedro-E5B-M-E3-Wireless-Mesh-Expansion-System-
FIG 1

  Quantity Description
A 1 Eyedro module (3 port)

B

| ****

3

| 200A current sensor (no

sensors included with –SUB systems)

C| 1| 6VAC power adapter

Record Serial Number:
(located under barcode on module)

Install Hardware

Install current sensors on the line1 conductor of the circuits(s) to be monitored.

Connect sensors & power adapter to the Eyedro module

Create a MyEyedro User Account

Go to my.eyedro.com to create your online account or log in if you have an existing account).

Add the device to your user account:
go to Configuration, select Devices then enter the serial number you recorded in Step 2.
ENJOY! Log into MyEyedro as often as you like to view your electricity consumption.
For more details about the MyEyedro cloud service, review the MyEyedro User Guide located at eyedro.com/support
Copyright © 2022, Eyedro Green Solution

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals