Keepsmile 3528 LED Strip Light User Manual

Table of Contents

Keepsmile-3528-LED-Strip-Light-PRODUCT

Specifications

To install the LED Strip Light, follow these steps:

Installation Tips

Here are some tips to consider during installation:

Ensure that the LED Strip Light is properly aligned and attached to the desired surface.
Avoid bending or twisting the LED Strip Light excessively.
Secure the Controller Box in a suitable location near the LED lights.

DIY Remote Control

The included Remote Control allows you to customize the settings of the LED Strip Light. Follow the instructions below:

Point the Remote Control towards the Controller Box.
Press the desired buttons on the Remote Control to change the lighting color, brightness, and mode.

Smart APP

The Smart APP, named “Keep Smile”, provides additional control options for the LED Strip Light. Follow these steps to use the Smart APP:

Scan the QR code or search for “Keep Smile” in your app store to download the smart app.
Open your phone’s Bluetooth settings and search for LED light devices. The device name format should be KSxx-xxxxxx.
Do not click on the LED lights device name directly. They will be connected automatically when you enter the APP.
Enter the smart APP and click on “car light” to start controlling your LED lights.

Customer Service

If you require any assistance or have any questions, please contact our customer service:

FAQ

Q: How do I connect the LED Strip Light to the Controller Box?

A: Use the provided cables to connect the LED Strip Light to the Controller Box.

Q: Can I control the LED lights using both the Remote Control and the Smart APP?

A: Yes, you can use either the Remote Control or the Smart APP to control the LED lights.

Choose a flat, dry, and clean wall
tear the plastic sheet bit by bit
stick the LED strip on a suitable surface
Connect power and controller
Connect the controller and the light strip. Note that the arrow must be arrow-to-arrow when connecting.
For the best-use effect, the connection at each end should not exceed 32.8ft, otherwise, the power supply and controller will be damaged.

please use the power adapter that we equipped or the same specification adapter as ours.
The input voltage must meet the voltage required by the light
The output power of the adapter (KW value) must be equal to or greater than the power of the LED strip lights
Check whether the controller and the light are connected correctly.
Check whether the remote control is open, remove the insulation sheet, and whether the remote control battery is charged.
Ensure that is being used within 5 meters and aligned to the infrared receiver of the controller

WARNING

Keepsmile-3528-LED-Strip-Light-FIG-2

Keepsmile-3528-LED-Strip-Light-FIG-3

Scan the QR code or search “Keepsmile” to download the smart app.
Open your phone Bluetooth to search for LED light devices, device name format: KSxx-xx
Forbid to click the LED lights device name directly, they will be connected automatically when you enter the APP.
Enter the smart APP, and click the car light to start your technology journey.

Smart APP 2

Please do not click on the device name, please go directly to the “Keepsmile” app.
When you enter the “Keep Smile” app and select “Car Light”, you will see the connection status of your device
Auto connect successfully:
Click the icon and disconnect
Individually control one of the two sets of equipment:

Please note for Android phones, the songs will sync from any music APP, but for iPhone users, it only can sync to music from iTunes because of Apple’s system and software limitations”
Download music on your computer.
Download and Install iTunes on your computer
Log on to iTunes with your Apple ID and password
Add “downloaded music” files to your iTunes
Sync your iPhone with iTunes on your computer
iTunes’s music playlist will be automatically synced to the smart app music menu.