PROZIS Pix-E Avant Portable Projector User Manual

: June 6, 2024
: PROZIS

Pix-E
Avant
Portable Projector
User Manual
Warranty Statement
V.1 01/2021

FIGURE 1
Control Panel Buttons| FIGURE 2
Bottom View
---|---
FIGURE 3
Front View| FIGURE 5
Remote Control

Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.

The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals

Legal compliance statement

By means of this document, Prozis declares that the PIX-E Avant – PORTABLE PROJECTOR is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses.

Prozis will always be available for any additional explanation through our customer support communication channels, found at www.prozis.com/support.

To avoid any impact on the environment or human health due to dangerous substances present in electrical and electronic devices, the end-users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of electrical and electronic equipment along with the unsorted household waste. Dispose of it separately and properly instead.
**** The packaging that protects the device against transport damage is made of non-polluting materials that can be disposed of via local recycle bins.

Safety warnings

DANGER! This symbol, when combined with the note Danger , means high risk. Failure to observe this warning may lead to injury to life and limb.
DANGER! Do not look directly at the projector lens nor point it towards people or animals. The strong light will flash your eyes and cause slight pain if close to the lens.

DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

May be used by children 8 years and up as well as persons with physical, sensory, or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
Children must not play with this device.
Cleaning and maintenance must not be performed by children without supervision.

To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

Do not use the device if any part is broken or missing.
Do not use damaged power cords, accessories, and other parts with your projector.
Do not block or place anything near the projector’s ventilation holes. Doing so may cause internal heat build-up. Also, do not place your hands near its ventilation port as it may cause injuries.
Do not expose the device to heat sources or flammable substances.
Do not expose the projector to electromagnetic interference.
Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail.
When the projector is working, DO NOT look directly into the projection lens or point the lens towards people or animals. The strong light will flash your eyes and cause slight pain if your eyes are too close to the lens.
Do not place your appliance on uneven or unstable surfaces.

Do not place this projector in any of the following environments:

Poorly ventilated or confined spaces.
Any location where temperatures may become excessively high.
Any location where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector’s lifespan and darkening the image.
Do not allow children or pets to play with the device. This device is not a toy.
Do not alter or modify the device in any way.
Do not drop, strike or disassemble the device, or attempt to repair it yourself.
Only use the parts provided by Prozis. The use of unauthorized accessories may damage the device.

POWER SUPPLY The power supply must be a safe voltage source, compatible with the electrical ratings marked on the projector (5V — 3A). Any external power supply used with this product must comply with relevant regulations and standards applicable in the country of intended use.

User manual

PACKAGE CONTENTS

1 x Prozis Pix-E Avant – Portable Projector
1 x Remote control
1 x Tripod
1 x AC/DC adapter

Maintenance and cleaning

Switch off the projector and remove all plugs at least 30 minutes before cleaning.
Clean the device with a dry, clean cloth. Do not use any chemical or abrasive cleaning agents.
Do not use sharp objects, nails, or brushes.
Clean the lens with lens cleaning paper. Do not use any chemical cleaning agents as they may damage the lens coating film.

Storage

When not using the device for long periods of time, store it away from heat, humidity, direct sunlight, and electromagnetic radiation.
Rechargeable batteries need to be cycled for maximum performance and longer battery life. If you don’t use the projector that often, make sure to recharge the battery regularly in order to keep it working properly.

PRODUCT OVERVIEW:

Control Panel Buttons: see page 2, figure 1
A. Volume
B. Home
C. Back
D. Menu

INSTRUCTIONS

How to use:

Front projector view: see page 2, figure 3

1. Focus wheel
Turn the focus wheel to adjust the image focus.
2. Power Button
Press and hold this button for 5 seconds to switch the projector on or off.
3. MicroSD™ Slot
This slot allows you to insert a microSD™ card, giving you access to your files directly from the projector.
Rear projector view: see page 2, figure 4
4. and 5. USB Input / Power Out
This port allows you to connect a USB flash drive or another external device to the projector. It also allows you to use the projector to charge a mobile device.
6. DC Input
This port is used to connect the power adapter. It is used both to provide direct power to the projector and to charge the internal battery.
NOTE: The power adapter may become warm or hot while in use. Never cover or attempt to touch the adapter while it is connected to a power source.
7. Audio Output
This port allows you to connect an external speaker or headphones to the projector.
8. HDMI Input
This port is used to connect the HDMI® (High-Definition Multimedia Interface) connector. It is compatible with TV, HD DVD, Blu-Ray, and other protected content playback formats.
9. Air Outlet Vent
When the projector is in use, warm air will exit from this vent.
NOTE: Always make sure the air vents are never obstructed by paper, clothing, or any other objects. Blocking the vents may result in overheating.

Bottom projector view: see page 2, figure 2
1. Air Inlet Vent
When the projector is in use, cool air will enter this vent.
2. Tripod Dock
This dock allows the projector to be mounted onto the included tripod.
3. Non-Slip Feet
These rubber feet give the projector additional traction, providing more stability when placed on a surface.

CHARGING THE PROJECTOR

Insert one end of the supplied power cable in the DC input.
Insert the plug of the power cable into a power outlet.

ATTENTION! Please use the supplied AC/DC adapter to avoid possible dangers such as electric shock and fire.

WI-FI

Select the “Settings” icon on the projector’s main interface and then “WIFI”. Select the “ON/OFF” icon next to the word Wi-Fi to turn Wi-Fi on or off.
Choose the Wi-Fi network and enter the password to connect.

BT

Select the “Settings” icon and then “BT”.
Select “Projector”, rename it, and click “OK”.
Select “Available equipment” and choose the available device.

EASY WI-Fl HOTSPOT

Select the “Settings” icon and then “Convenient hot spot”. Select “OFF” to turn Easy Wi-Fi Hotspot on.
Reset “Network SSID” > “Password” > “Choose security” > “Select AP band”. Choose “Save” to save the message.
Use the smartphone to select this hotspot and enter the password to connect and share the screen on the projector.

ETHERNET

The Ethernet adapter cable is not included. You need a USB adapter to connect the USB to Ethernet.

HDMI

The HDMI input function is mainly used to transmit information from other devices (your laptop, gaming device, or television) to the projector.

CONNECT THE PROJECTOR TO THE COMPUTER

Locate the USB input on the device.
Plug one end of the USB cable to the projector and connect the other end to the computer’s USB port.
Select the “Settings” icon and find the “Developer Options”
Select “USB”. The word “ON” will pop up next to “USB”.

FACTORY DATA RESET

Select the “Settings” icon on the main interface and find the “Other settings”
Select “Factory data reset” and then “Ok” to delete and reset all data.

APK DOWNLOAD AND INSTALLATION

Select the “Apps” icon on the main interface and then the “APKlnstaller”
Choose the “App Install” You can install apps from microSDTM cards, USB drives, or the Play Store.
By selecting the “APP Manage” icon in the “APKInstaller” interface, you will see the projector apps. You can choose to launch, export, or uninstall any of them.

READING USB DRIVES, HDDS, SD CARDS, AND WORD, EXCEL, AND PPT FILES

The projector supports USB drives with a storage capacity of up to 32 GB and Hard Disk Drives with a storage capacity of up to 1 TB.
Select the “FileExplorer” icon on the main interface and then “USB” or “SD Card”.
Select the “Apps” icon on the main interface and then the “WPS Projector” Follow the instructions provided on the projected image.

SAME SCREEN FUNCTION – ANDROID

Both the Android device and the projector should be connected using the same Wi-Fi.
Select the “Same Screen” icon in the projector’s main interface.
Select the “Wi-Fi Display” icon and then “Search”. It will search for the smartphone. Choose “Agree” in the pop-up window.

NOTE: The “Wi-Fi Display” function is only possible if you are using Android devices that support “Smart View”. For other devices use “EShare”.

SAME SCREEN FUNCTION – IOS

Both the iOS device and projector should be connected using the same Wi-Fi.
Select the “AirPlay” icon in the projector’s main interface.
Open AirPlay in iOS device settings, select the projector ID in Air Playlist, and wait for a mo-
The screen content on the iOS device will be displayed on the projector screen.

USING THE SAME SCREEN WITH ESHARE

Install the EShare App:
• Please make sure both the smartphone and the projector are connected to the same
• Select “Eshare” or the “Apps” icon on the main interface and then click the “EShareServ er” Follow the steps displayed on the screen.
• Download the “EShare” app by scanning the provided QR Code or visiting the provided link.
Pairing the projector with an Android device
Once the EShare app has been installed, open it on your smartphone. The app will search for the projector sharing the same network. Click “Device list” on top to search again and select the projector ID from the list of devices found.
If there is only one device available in EShare, the projector will automatically be paired with the smartphone.
Wireless File Transfer
You can transfer files, including music, video, images, office documents, PDF files, e-books, or APKs from your smartphone by selecting “Storage”.
Wireless Control
Click this icon in EShare to use your smartphone as the projector’s mouse, remote control, or keyboard.
TV Mirror
You can project images from your smartphone in real-time by selecting this icon.
Mirroring
You can project your smartphone screen by selecting this icon.
Camera
You can project photos and videos from the smartphone’s camera in real-time by selecting this icon.

ESHARE FOR IPHONE OR IPAD

Slide your finger on the iPhone/iPad screen from bottom to top. Select “AirPlay” and choose the projector ID from the list of devices found.
Installing the EShare App:
• Please make sure both the iPhone/iPad and the projector are connected to the same network.
• Open the App Store on iPhone/iPad.
• Search “EShare” and install “EShare for iPhone/iPad”.
• Open “EShare” and select the projector’s ID.

ESHARE FOR WINDOWS

Installing the EShare App:
• Please make sure both the Widows device and the projector are connected to the same network.
• Select the “Apps” icon on the main interface and then click the “EShareServer” icon.
Follow the steps displayed on the screen.
• Copy and past the provided download link to the Explorer search bar, download and install “EShare for Windows”.
• Open EShare and select the projector’s ID.
Pairing with Projector:
• Open the “EShare” app and it will search for the projector sharing the same network.
• Select the projector’s ID from the list of devices found.

SYNC CABLE FOR IPHONE/IPAD

Use a USB cable to connect the iPhone/iPad to the projector.
A “Trust this computer?” window will pop up. Select “Trust” and wait a few seconds. The iOS device screen will synchronize with the projector.

SYSTEM UPDATE

Select the “Apps” icon on the main interface > “Online Upgrade” > “Check for updates”.
Follow the steps displayed on the screen.

TROUBLESHOOTING

Some issues that arise may be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service.

PROBLEM	CAUSE	SOLUTION
Blurred image.	The lens is not focused correctly.	Slide the focus wheel on

the side of the projector to adjust sharpness.
The image size is tilted.| Wrong distance.| The projected image size is adjusted according to the distance between the projector and the wall or projection screen.
Wrong image size.| Wrong angle.| The projector features an automatic angle correction. If the projected image is not square, please adjust the angle of the projector.
The projector fails to read the USB flash drive and the microSD™ card.| The file format is not supported.| Please check if the USB flash drives and microSD™ cards run on a computer and if the file formats are supported by the projector.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.

GENERAL CONSIDERATIONS

This document contains the terms and conditions of the Prozis warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.

WARRANTY PERIOD

Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law.
In the event that repair is required, this 2-year period is suspended during repair time.

CONSUMABLES

The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials, or production.

HOW TO MAKE A CLAIM

If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information are also provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

WARRANTY REPAIRS

Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS

The following situations are not covered by this warranty:

Any wear and tear of parts and components resulting from normal product use.
Cracks, dents, scratches, and other types of surface damage only affect the product’s appearance.
Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
Use and storage of the product not complying with user manual instructions.
Opening of the product by a third party who is not authorized to proceed to its repair.
Altering or changing parts or components, whether internal or external.
Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
Use of the product in the context of a business, occupation, or commerce.
Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport, and component costs.

The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with, or modified in any way.

LIMITED RESPONSIBILITY

Prozis cannot be held responsible for indirect damage or loss due to usage of the product.

WHAT TO DO?

To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:

PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga – Portugal