AUDIOropa Xepton TX-1 2.4 GHz Transmitter User Manual

AUDIOropa Xepton TX-1 2.4 GHz Transmitter

Introduction

Thank you very much for purchasing the »xepton« communication system! You have chosen a modern and reliable system. Please read this manual carefully to be able to set up the unit correctly and to familiarise yourself with all of the features of the system. xepton« is an ideal system for application within groups – ranging from simple dialogue to interpreter-, team-teaching- and conference systems. Being slim and light-weight in design, it combines quality and versatility with easy use and state-of-the-art radio technology.

Scope of delivery xepton TX-1

Please check if all of the following components are included:

• xepton TX-1
• ear microphone EM-01
• belt clip BC-01
• USB-charging cable UC-01
• neck strap
• user manual
• warranty card

Should any parts be missing, please contact your dealer or the manufacturer directly.

Main Features

• Worldwide compatibility due to restriction-free 2.4 GHz transmission
• Large transmission range of up to 300 m
• Fully digitalized crystal clear sound quality
• Up to 20 hours of use per battery charge
• Convenient charging by Micro-USB, compatible with most mobile phone charging adapters

Available accessories

• xepton rechargeable battery A-5260-0
• UC-01 USB-charging cable A-5261-0
• USB power supply unit A-5262-0
• PM-01 plug-in microphone A-5263-0
• CM-01 clip microphone A-5264-0
• HM-01 headband microphone A-5266-0
• BC-01 belt clip A-5291-0
• AM-01 arm strap holder A-5292-0
• RCB-20 charging bag for 20 bat. A-5250-0
• CB-20 USB-cable charger case for 20 TX-1/RX-1/TRX-1: A-5251-0
• MCB-10 10-bay charger case A-5252-0
• DC-20 Drop-in charger case for 20 TX-1/RX-1 : A-5253-0
• DC-40 Drop-in charger case for 40 TX-1/RX-1: A-5254-0

Xepton TX-1 Transmitter

Controls and displays

Power ON / OFF

Slide the ON/OFF switch upwards to switch the device on. The LC display will light up and the currently selected group number is shown. To switch the device off after use: Slide the ON/ OFF switch back to the lower position.

Transmission

The transmission will start as soon as the device is switched on. The symbols, Wifi »MASTER« und »TALK« are indicated.

Group selection

Switch the device off. Then press and hold both the buttons while switching the device on. The symbol „GRP« in the display will blink. Select a group number of your choice between 00 and 39 by pressing the buttons. After the selection, wait for 5 seconds to set the chosen group number. The »GRP«-symbol will stop blinking and the selected group number is displayed.

Please note: There should only be one active transmitter within a group! Additional activated transmitters with the same group number will cause interference in the sound quality. Should a simultaneous transmission of several transmitters be desired, please consider using TRX-1 transceivers instead.

Adjusting input sensitivity

The sensitivity of both the inputs »MIC« und »AUX« can be set from 00 to 05. To set the sensitivity, press the MODE button. The »VOL« symbol is indicated on the display. Use the buttons to set the input level as desired.

Power supply/recharge

The device is equipped with a rechargeable lithium-ion battery of 3,7 V / 1100 mAh. The red charging status LED is lit during recharge. The LED switches off when the battery is fully loaded. To charge the battery, plug the USB charging cable into the USB jack of the TX-1 and connect it to a regular USB port (computer, laptop, USB power supply). The charging cases MCB-10 and CB-20 are equipped with USB charging cables. The charging cases DC-20 or DC-40 can be used for charging larger amounts of RX-1 and TX-1. Simply place the devices in the according to charging slots. If charging of a larger quantity of batteries is required, it is possible to take the battery out of the compartment in order to charge it in the charging bag RCB-20 (featuring 20 charging bays).

Specifications xepton TX-1

• Device type Transmitter
• Dimensions 85 x 50 x 15 mm (H x W x D)
• Weight 66 g
• Frequency type ISM 2403 – 2480 MHz
• Transmission mode ISM 2.4 GHz FSK modulation with frequency hopping
• Transmission power Maximum 10 mW
• Latency < 30 ms
• Data rate 2 Mbps
• Power LI-ION 3,7 V / 1100 mAh
• Talk time 20 hours typical
• Range up to 300 m

Conformity

This device satisfies the following EU directives:

• 2011 / 65 / EC RoHS-directive
• 2012 / 19 / EC WEEE-directive
• 2014 / 53 / EC RED-directive

Compliance with the directives listed above is confirmed by the CE seal on the device. The complete CE compliance declaration is available on the internet at www.humantechnik.com. Specifications subject to change.

Maintenance and care

All »xepton«-devices do not require any maintenance. If they become dirty, simply wipe them clean with a soft, damp cloth. Never use spirits, thinners or other organic solvents. Do not expose them to full sunlight. In addition, they must be protected against excessive heat, moisture and severe mechanical shocks. Note: These products are not protected against splash water. Do not place any containers filled with water, such as flower vases, or anything with an open flame, such as a lit candle, above or near the products.

Warranty

All »xepton«-devices are very reliable products. Should a malfunction occur despite the unit having been set up and operated correctly, please contact your dealer or the manufacturer directly. This warranty covers the repair of the product and returning it to you free of charge. It is recommended that you send in the product in its original packaging, so keep the packaging for the duration of the warranty period. The warranty does not apply to damage caused by incorrect handling or attempts to repair the unit by unauthorized persons (destruction of the seal on the unit). Repairs will only be carried out under warranty if the completed warranty card is returned accompanied by a copy of the dealer’s invoice/till receipt. Always specify the product serial number in any event.

Disposal of used electrical and electronic units (applicable in the countries of the European Union and other European with a separate collection system). The symbol on the product or the packaging indicates that this product is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electrical and electronic units. You protect the environment and health of your fellow man by the correct disposal of this product. Environment and health are endangered by incorrect disposal. Material recycling helps to reduce the consumption of raw materials. You will receive further information on the recycling of products from your local community, our communal disposal company, or your local dealer.

References

• Willkommen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>