Continental CE-FP001 Food Chopper User Manual

Continental CE-FP001 Food Chopper User Manual

IMPORTANT SAFEGUARDS

• Keep the product out of the reach of children and pets. This product is not intended for use by children. Extra caution is necessary when using this appliance near children.
• Always ensure the product is unplugged from the electrical outlet and the all parts stopped before assembling, disassembling, relocating, or cleaning it.
• Do not leave the product unattended while it is in use. Always unplug the product from the electrical outlet when not in use.
• Do not place the Base, Power Cord, or Plug of this product in or expose the parts to water or other liquids.
• Avoid contact with moving parts. Keep hair, hands, fingers, or any other body part from coming into contact with the moving parts while the product is operating.
• Keep hands and utensils away from moving Blades while operating the product. A scraper may be used but only when the product is not operating.
• Keep the power cord and product away from heated surfaces.
• Blades are sharp. Handle carefully.
• Do not use attachments not recommended or sold by the product manufacturer.
• Never place cutting Blades on the Base without first putting the Bowl properly in place.
• Always ensure the cover is securely locked in place before operating the product.
• Do not attempt to defeat the cover interlock mechanism.
• Do not plug or unplug the product into/from the electrical outlet with a wet hand.
• To disconnect from an electrical outlet, ensure the product is off and then pull directly on the plug; do not pull on the Power Cord.
• Do not put any stress on the Power Cord where it connects to the product, as the Power Cord could fray and break.
• Always assemble the product completely before plugging it into an electrical outlet.
• Do not operate the product if it has a damaged or cut Power Cord or plug, if wires are exposed, if it malfunctions, if it is dropped or damaged, or if the Motor Housing is dropped in or exposed to water. This product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform any servicing; take the product to the appliance repair shop of your choice for inspection and repair.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. ·Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• This product is intended for use in indoor, non-commercial, non-industrial chopping of foods for human consumption. Do not use the product outdoors or for any other purpose.
• Always place the product on a flat, level, stable surface.
• Do not allow the power cord to hang (e.g., over the edge of a table or counter) where it may be tripped over or pulled.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Before First Use

1. Remove product parts from packaging and disassemble. To remove the Container Bowl from the Base, turn Container Bowl counter clockwise. NOTE: Container Bowl may be slightly difficult to remove when product is new. To aid removal, place the Base onto its side on a soft surface and then turn Container Bowl firmly to remove.
2. Thoroughly wash the Cover, the Container Bowl, and the Blades in warm, soapy water. Rinse and let dry.

To Assemble

WARNING: Ensure the product is unplugged from the electrical outlet before assembling it. Handle the Blades with care as they are extremely sharp. Use caution when attaching, detaching, cleaning, or storing the Blades.

1. Ensure the product is unplugged from the electrical outlet.

2. Place the Base on a flat, level, stable surface.

3. Insert the Container Bowl over the Metal Shaft and turn the Container Bowl clockwise until the Safety Latches of the Container Bowl lock to the Base (preventing the Container Bowl from detaching).

4. Attach the Blades by holding the plastic shaft end (end opposite of the Blades) and inserting the Blade shaft over the center column of the Container Bowl until secure.

5. Attach the Cover after inserting the food into the Container Bowl.

IMPORTANT NOTE: The Cover must be securely turned into ON position before the food processor will operate.

To Use

NOTICE: Do not process cheese, coffee beans, or whole squares of chocolate in this product, as product damage could result.

1. Cut the food into small pieces, as needed.
   NOTE: Hard vegetables, such as raw carrots, may require splitting and/or quartering in order to allow smooth operation and movement of the Blades.

2. Place the food into the Container Bowl. Do not fill past the maximum capacity of 1½ cups.

3. Attach and gently secure the Cover onto the Container Bowl (reference the “To Assemble” section).

4. Plug the product into a standard 220volt AC electrical outlet.

5. The Cover securely turned into ON position before the food processor will operate.

6. To stop processing, release the The Cover..

7. Wait until the Blades and Metal Shaft have completely stopped before removing the Cover or any contents.

8. Unplug the product from the electrical outlet when it is not in use or is left unattended.

WARNING: Overfilling the Container Bowl could cause spillage, resulting in serious burns and/or property/product damage.

Tips:

• For liquid ingredients, place a maximum volume of ¾ cup when filling the Container Bowl.
• For better processing control, briefly press the On/Pulse Button and then release.
• To make bread crumbs, break the bread into pieces before placing them into the food processor.
• To use cracker or cookie crumbs as recipe ingredients or in pie crusts, break them into pieces before placing them into the food processor.
• To chop vegetables (e.g., carrots, celery, mushrooms, green peppers, onions): cut the vegetables into 1″ (approx. 2½ cm) chunks before processing them in the Container Bowl. This will allow more consistent chopping of the vegetables.
• Use the mini chopper to mince parsley, basil, chives, or garlic.
• Use the mini chopper to puree small amounts of cooked fruits or vegetables for baby food or as bases for sauces or soups.

Care and Maintenance

WARNING: To avoid the risk of electric shock, always ensure the product is unplugged from the electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it.

WARNING: Handle the Blades with care as they are extremely sharp. Use caution when attaching, detaching, cleaning, or storing the Blades.

• Always clean the product immediately after each use.
• Wash the Cover, Container Bowl, and the Blades in warm, soapy water; rinse and let dry.
• Clean the Base by wiping it with a damp cloth. To avoid product damage, do not immerse the Base into water or other liquids.
• To avoid damage to the product, do not use abrasive cleaners or scouring pads to clean the product parts.
• Reassemble the product before placing it into storage. (Reference the “To Assemble” section.)
• Store the product in a cool, dry place.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>