Govee H6057 Night Light User Manual

Govee H6057 Night Light

Safety Instructions

Read and follow the safety instructions below:

• The lamp is not waterproof. Avoid exposing it to splashes or drops of water.
• The working temperature should be between -1 Oto 40°C (14 to 104°F).
• Avoid installing the lamp near heat sources.
• Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).
• The internal light source of the lamp cannot be replaced. If it breaks, you must replace the lamp
• Only use this device with a SV Power adapter.
• Avoid the lamp falling from the height, causing damage to internal components and buttons.

Introduction

Thank you for choosing the Govee Night Light. With its colorful variety of lights, night lights up every night for your kids.It also offers multiple scenes and music modes designed for kids, which will create a unique ambience for kids at bedtime.

What You Get

Item:  Quantity

• Night Light  1
• Charging Base 1
• Adapter 1
• Quick Start Guide 1
• User Manual 1

At a Glance

• On/Off Button

• Power On/OFF:Press and hold for 3s. Standby Mode: Short press to turn off the sound and light.
  Awake:Short press once in Standby  Mode.
  Play/Pause Button Press to play/pause the sound.

• Volume/Dimmer Short press to increase or decrease volume.

• Button Long press to adjust the brightness.

• In Scene Mode, short press to change different light effects.

• Long press enter Color mode, then short press to change color. Press to change music sounds.

• Bluetooth Button Short press enter/exit the Bluetooth Mode. (If bluetooth connection is in use and other devices need to be paired, please long press to enter the pairing mode.)

• Sleep Button  Short press to enter the Sleep Mode. Long press to enter the Gaming Mode. (If you need to adjust the functions of the sleep mode, please go to the ‘My Device’ page on the app for setting)

• Indicator Light

  • A red light indicates the lamp is being  low-power.
  • A blue light indicates the lamp is normal operation.
  • A green light indicates the lamp is charging.
  • No light indicates that the lamp is fully charged.
  • The light blinks slowly indicates that the lamp is connecting other’s device via bluetooth mode.
  • The light blinks quickly indicates that the lamp is in high temperature protection mode.

Installing Your Device

Installing Steps

1. Place the lamp on the charging base and connect the adapter to the charging base;
2. Plug in the adapter and the installation is complete!

Bluetooth Mode:

1. If connecting for the first time, please short press the Bluetooth Mode of the light to enter the pairing mode;

2. Connect to bluetooth device

choose “Govee Night Light” to connect.

3. lf you want to connect to other devices, please long press the light bluetooth mode for 3s to enter pairing mode. Go back to the bluetooth device list and select the ‘Govee Night Light’ to connect.
   
   

Pairing Your Device with the Govee Home App

Installing Steps
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on the Bluetooth in your smartphone.
3. Open the app, tap “+” icon in the top right corner and search “H6057”.
4. Tap the device icon and follow the onscreen instructions to complete pairing.

Specifications

• Power lnput(Adapter) AC 100-240V
• Luminous 120lm
• Power lnput(Charging Base/Lamp) 5VDC 2A
• Light Displaying Technology RGBICW
• Working Temperature  -10 to 40’C (14 to 104’F)

Troubleshooting

Cannot connect the device to the Govee Home app?

1. Ensure the device is powered on.
2. Check if the Bluetooth on your smartphone is enabled or try connecting with another smartphone.
3. When connecting for the first time, ensure your smartphone is close to the device.
4. lf you’re still experiencing a connection error, delete the connected device from the “My Device”page on the app. Then, reconnect to the Govee Home app, following the instructions provided previously.

The device lost connection?

• Ensure the device is powered on.
• Shorten the distance between the device and the router to less than 50 inches, then reconnect.
• If the device continues to lose connection, delete the connected device from the ‘My Device’ page on the app. Then, reconnect to the Govee Home app, following the instructions provided previously.

Cannot pair or connect with Alexa or Google Assistant

• Ensure the stability of the Wi-Fi connection.
• Go to the “Device Settings” page and click “User Guide” to follow the instructions to pair the device again.
• Please check whether it is in the Battery-saving mode on the APP. The online function cannot be used normally in the Battery-saving mode.

The synchronization effect for Music mode is not working  properly

• Ensure the is close to the music source to help the mic pick up sounds better.
• Try switching the mic source to the smartphone.

Can multiple users control one device?

• Each device can only be controlled by one account.
• If multiple users want to control the same device, ensure that they are all using the same account.

Cannot play music or sound effects.

• In Bluetooth mode, the device is given priority to respond to the Bluetooth Speaker’s sound, and cannot respond to local white noise and other
• Please go to the “Device Settings” page to check whether the ‘Prompt Tone’ or the ‘Silent Power-Up’ function is turned on.

Cannot be controlled properly.

• Please confirm whether the lamp is near high temperature heat source.
• Under high temperature, the lamp will automatically enter the high temperature protection until exited.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• C:l @Govee @J @govee_official  @govee.official
• C’J @Goveeofficial O @Govee.smarthome

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from  that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-005.

FCC and IC Radiation Exposure
Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
la distance entre !’utilisation et l’appareil ne doit pas €:tre infE!rieure a 20 cm.
This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced.
Not intended for illumination. Only used for creating ambiance.

1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
2. Do not use the rope light when covered or recessed into a surface;
3. Do not open or cut the rope light;

Responsible party:
Name: GOYEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AYE STE 5 BLUE ISLAND IL 60406-2448 Email: support@govee.com
Contact information: https://www.govee.com/support
FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTERIEUR UNIQUEMENT

CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT1YPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

ATTENTION :
RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN 1YPE INCORRECT. ELI MINER LES BATTERIES USEES CONFORMEMENT AUX INSTRUCTIONS.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.
Govee is a trademark of Shenzhen lntellirocks Tech. Co., Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd. All Rights Reserved.

Govee Home App
For FAQs and more information,
please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>