PROZIS Pivot USB Microphone User Manual

June 6, 2024
PROZIS

PROZIS Pivot USB Microphone

OVERVIEW

PROZIS Pivot USB Microphone 1

Prozis is a registered trademark of PROZIS.COM, S.A. Prozis reserves the right to adjust or modify the product or any of the associated documenta-tion in order to ensure its suitability for use, at any time and without prior notice.
The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals

Legal compliance statement
By means of this document, PROZIS declares that the Pivot USB Microphone is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses. Prozis will always be available for any additional clarification through our customer support communication channels, available at www.prozis.com/support

To avoid any impact on the environment or human health due to dangerous substances present in electrical and electronic devices, the end users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of electrical and electronic equipment along with unsorted household waste. Dispose of it separately and properly instead. The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety warnings

Danger! This symbol, when combined with the note Danger, means high risk. Failure to observe this warning may lead to injury to life and limb. DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

  •  Packing materials are not toys. Children must not play with the packing materials. There is a suffocation risk.
  •  This product may be used by children 8 years old and over as well as by persons with physi-cal, sensory or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
  •  Children must not play with the device.
  •  Cleaning and maintenance must not be performed by children without supervision.
  •  Keep the device out of the reach of children.

CAUTION! THIS SYMBOL HIGHLIGHTS DANGER-OUS SITUATIONS THAT CAN LEAD TO MINOR TO MODERATE INJURIES, DAMAGE, MALFUNCTION, AND/OR DESTRUCTION OF THE DEVICE.

To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

  •  Never immerse the device in water or other liquids!
  •  If the device becomes hot after being used for a long period of time, it is recommended to stop using it for a while so it can cool down.
  •  Avoid touching the microphone with sharp or coarse materials.
  •  Do not drop the device. Any impact may lead to damage, internal malfunction or scratches to the surface.
  •  Discontinue use of the product if damaged.

PACKAGE CONTENTS

  •  1 × Pivot USB microphone
  •  1 × USB cable
  •  1 × Tripod
  •  1 × Quick guide

CLEANING AND MAINTENANCE

  •  Switch the product off and remove all plugs before cleaning.
  •  Never clean any of the product’s components using aggressive cleaning agents or materi-als such as scouring milk or steel wool. These could damage the product!
  •  Protect the device from water drops and sprays. Use only a clean, dry cloth to clean the de-vice. Never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to remove stubborn dirt.
  •  Make sure no moisture enters the product while cleaning, to prevent damage tp the prouct and related repairs.

STORAGE

  •  When no longer using the device, store it in a dry environment, away from dust and direct sunlight.
  •  Store your device in the original case provided.

PRODUCT DESCRIPTION: SEE PAGE 2

  1.  Pivot USB microphone
  2.  Tripod
  3.  USB port
  4.  USB cable

INSTRUCTIONS

Setup and connection

PROZIS Pivot USB Microphone 2

  1.  Screw the pivot mount onto the top of the tripod.
  2.  If necessary, use the mount’s thumbscrew to adjust the microphone angle (left to loosen, right to tighten).
  3.  Make sure to tilt the microphone in a counterclockwise direction. Tilting it clockwise can cause the bracket to break.
  4.  Screw the threaded metal ring to adjust the microphone’s horizontal angle 360º.
  5.  Connect one end of the USB cable to the microphone and the other to a computer.

NOTE : Make sure that the front of the microphone must be facing the sound source: to record your own voice, make sure that the logo on the microphone is facing you.

Troubleshooting

Some issues that may arise can be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service.

PROBLEM CAUSE SOLUTION
No signal seems to be coming in. Make sure the microphone is connected
correctly. Make sure that the microphone is selected as the default recording

device in your operating system.
My voice can’t be heard while using applications| The microphone is not selected as the default recording device in the application you are using.| Configure the application setup accordingly.
The signal volume is too low.| The microphone is positioned incorrectly.| Place the microphone correctly.
| The volume setting is too low.| Increase the microphone volume in your operating system settings.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-ered by the warranty applicable to the purchase and sale of consumer goods.

GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers. This warranty is valid exclusively for consumers who purchase the product for non-profession-al purposes.

WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective deliv-ery, or for longer if legally established by the applicable national law. In the event that repair is required, this 2-year period is suspended during repair time.

CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials or production.

HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty. Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS
The following situations are not covered by this warranty:

  1.  Any wear and tear of parts and components resulting from normal product use.
  2.  Cracks, dents, scratches, and other types of superficial damage that only affect the prod-uct’s appearance.
  3.  Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
  4.  Use and storage of the product not complying with user manual instructions.
  5.  Opening of the product by a third party who is not authorized to proceed to its repair.
  6. Altering or changing parts or components, whether internal or external.
  7.  Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
  8.  Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
  9.  Use of the product in the context of a business, occupation or commerce.
  10.  Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with or modified in any way.
LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.

WHAT TO DO?
To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations. Send back the product inside its original packaging, including all accessories and documentation, to the following address:

PROZIS
Rua do Cais nº 198 4830-345 Póvoa de Lanhoso Braga – Portugal

CONTACTS
Prozis is always available for additional clarification through their customer service communication channel at www.prozis.com/support.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals