Shenzhen Xinyiheng Digital DY28S Mini HiFi Speaker User Manual
- June 6, 2024
- Shenzhen Xinyiheng Digital
Table of Contents
User Manual
【Product Appearance】
【Operation Instruction 】
- KEY: Enter the sleep function setting.
- KEY: Press to answer calling. Press twice to fast call back the recent call.
- KEY: Press to increase the volume. Press and hold to play the next song.
- KEY: Press to decrease the volume. Press and hold to play the previous song.
- “BT” KEY: Enter the Bluetooth mode, there will be a prompt tone for successful connection and disconnection.
- KEY: In Bluetooth mode, Bluetooth mode, and MP3 mode, short press to play/pause. In any mode, long-press the software to shut down, then short press to start the software.
- KEY: Press to show the clock. Press and hold to set the Clock/Date/Year.
- KEY: Press to show the alarm. Press and hold to set the Alarm.
- speaker mesh ” : Turn on the device, continuously touch the speaker mesh to adjust seven lamplight modes: Low
brightness/high brightness/breathing light/transform light/music light/turn
off. Touch the speaker net to watch the time on display. When the alarm works,
clap once to enter sleep mode and clap twice to stop the alarm function.
10. “Power on/Off ”KEY: switch on to power on, switch off to power off.
Back control panel:
**SLEEP timer switches off the speaker without the nightlight.
T ouch TOP PANEL or press key to restart the speaker.
【Device power supply and Charging instructions 】
- (USB 5V) power supply.
- Built-in Lithium Rechargeable Battery(Not removable).
- Charging Lithium Battery to connect USB cable with the speaker, red LED indicator on. After 5 hours, it reaches full capacity green LED indicator.
- If unused the speaker is for more than one month, please recharge it every month to keep the Lithium Battery be activity.
- If a speaker doesn’t use it within two and three months in avoid battery over-discharge or battery leakage problems, please check the Lithium Battery before using.
- Battery status indicator show
【LIGHT FUNCTION INSTRUCTION 】
Seven light modes and 48 different colors are optional, choose from by clapping the speaker net.
- Low brightness: 30% brightness, gentle lamplight
- Middle brightness: 60% brightness, soft lamplight
- High brightness: 100% brightness, very bright
- Cycle light: 48 colors light cycle automatically, letting you enjoy excellent vision
- Music light: The light change color following different volume and rhythm(it blinks in 2.5 seconds when not play music)
- Customize 48 light colors: In any light mode, press and hold the speaker mesh to change the light color.
Stop holding to choose the light color.
【BLUETOOTH MODE】
Default Mode is Bluetooth Mode.
Press “ BT ” key to enter Bluetooth Mode.
-Music playing mode
Press key to play/pause the song.
Press the key to increase the volume.Press and hold key to play the next
song.
Press key to decrease the volume. Press and hold key to play the previous
song.
*User also can use the Mobile phone to control the multimedia speaker.
-Handset and Hands-free MODE
Press key to answer a call. Press key to hang up the call.
How to connect speaker by Bluetooth
*Firstly, the user turns on the Bluetooth device in the cell phone/ MID/computer and selects the device name as “DY28S” to connect. After connecting, the user hears the indicated sound. When returning to Bluetooth mode, the Bluetooth speaker and the Mobile phone will be paired automatically.
【CLOCK MODE】
Press key to enter Clock mode.
Press key to show the time format from 12 to 24 hours or 24 to 12 hours.
Press and hold key to enter the setting of Clock mode.
Press key to select the flashing digits in sequence
year/month/date/hour/minute and press or to adjust the
digits(year/month/date/hour/minute).Press key to confirm the setting.
【ALARM MODE】
Press key to enter Alarm mode.
Press and hold key to enter the setting of Alarm mode.
Press key to select the flashing digits in sequence hour/minute and press or
adjust the digits (hour/minute). * If using an MP3 file inside
TF card for the alarm sound, the User makes a directory named as Alarm and
store
one MP3 file inside the alarm directory. Then insert the TF card into the
speaker.
Press key to confirm the setting and enter the setting of alarm alert
status.Press “” or” key to set alarm alert status in sequence OFF/ ON.
Press key to select the volume of alarm settings. Press or to adjust the
volume of alarm.
Press key to confirm the setting.
(When the alarm alert and the wake-up light is on, touch “Speaker mesh” to
turn
on the snooze function. After 5mins, the alarm will alert again. /When the
alarm alert and the wake up light is on,
touch “Speaker mesh” twice or press any key to stop the alarm function ).
【MP3 PLAYER MODE】
Inserted TF card/U disk to enter TF card /U disk player mode. When inserting
TF card/U disk, press “BT” key to
enter TF card /U disk player mode.
Press key to play/pause the song.
Press key to increasing the volume. Press and hold key to play the next song.
Press key to decrease the volume. Press and hold key to play the previous song.
Press key to select the indicator light in a sequence of 15 min, 30 min, 60
min to set the count time. No indicator lights on means Sleep Mode is Off.
It is timer for 15mins, 30mins, 60mins to turn off the speaker including the
nightlight.
Next time you will want to use a sleep timer. Please follow to do the above
procedure again.
【FAQ】
No power| Check Lithium Rechargeable Battery which has power or not Check DC5V
Plug is plugged properly
---|---
No sound or Sound distortion| Check the level of volume which is not on zero
status Check music file is damaged or not . The damaged music file produces
sound distortion and cannot play. Please keep the good music files.
Check Lithium Rechargeable Battery which is not enough power.
Device hangs up
| Use <1mm stick to press and hold the reset key inside the hole between the time set key and alarm set key. Switch OFF the power then Switch ON the power again or After Charging, Switch ON the power once again.
【Specification】
Display | LED |
---|---|
Built-in lithium Rechargeable Battery | Playtime: Max 4-5 Hours |
*According to the level of Volume
MP3
| Output power| 10W
MP3 Bit Rate| 8K bps – 320Kbps
Signal noise ratio(SNR)| 85dB
Signal Distortion| <0.55%
Music Format| MP3
Operation temperature| -5 to 40 Celsius Degree
- Product appearance, function, and specification might change without prior notice.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may
cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm from the
radiator of your body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>