Shenzhen Xinyiheng Digital DY28S High Quality Portable LED Touch Lamp Bluetooth Speaker User Manual

Shenzhen Xinyiheng Digital DY28S High-Quality Portable LED Touch Lamp

Bluetooth Speaker

Product Appearance

Operation Instruction

1. KEY: Enter sleep timer mode settings.
2. MODE” Kf;Y; Short press: lo select lo switch th& function modes, respectively:
3.  Ala.rm Clock- Sleep Aid – Bluetooth.
4.  KEY: Press to increase th& volume. Press and hold to play the next song.
5.  KEY: Press 10 to decrease the volume. Press and hold 10 play the previous so,19.
6.  KEY: In Bluetooth mode and MP3 mode. short press to play/pause. In any
7. mode. long press: lo shut down the software, then short press lo start the software.
8. Reset button  Reset Speaker.
9.  Power ON/Off”: switch on to power on.
10. US8HOST switch off lo power off.
11.  Speaker mesh” : Touch speaker mesh to wake up the speaker or adjust the night light

The SLEEP timer switches oft the speaker without the nightlight. Touch the speaker mesh or press key to wale up the speaker.

Device power supply and Charging instructions

1. USB DC 5V power supply.

2.  Built-in Rechargeable Lithium Battery(Not removable) .

3.  When charging, connect a 5V charger lo the Type-C charging port of the Speaker, red indicated LED on the indicator lights up. When the battery is full, lhe green LED indicator lights up.

4.  unused the speaka< for more than 0 110 month, please recharge it every month lo
   keep the Lithlum Battery be activity.

5. the speaker doesn’t use within two and three months in avoid of battle)’ ovor discharge or battery leakage problems .please check the lithium Battery before using.

6. Battery status indicator show. 100% filj) 25%-10%

LIGHT FUNCTION INSTRUCTION

Touch ·speaker mesh” to control the night light.

1. Touch The white LOW light(Sof\ and comfortable. about 30% brightness value.)
2.  Touch The while MIDDLE llght(Appropriate,11bout 60% brightness value.)
3.  Touch The white HIGH light(about 100%brightness value.)
4.  Touch Breathing loghl(adJusting brightness value from low to high to low automatically and changing color at the same time.)
5.  Touch Music light(adjusting color and brightness value with music playing. Flashing every 2.5 seconds without playing music.)
6.  Touch The light OFF. Press and hold the ·speaker mesh”to change tight color.Stop holding to choose lhe light color you llke(48 colors total).

BLUETOOTH MODE

• Press the “MODE” key three times to enter the Bluetooth mode, there will be a prompt tone tor successful connection and disconnection.
• Music playing mode. Press key to play/pause the song.
• Press key to increasing the volume. Press and hold key to play the next song.
• Press the key to decrease the volume. Press and hold the ” 144/-” key to play the previous song.
• Users also can use their Mobile phones to control the multimedia speaker. Handset and Hands-free MODE
• Press key to answering a call. Press key to hang up the call. How to connect speaker by Bluetooth
•  Firstly, user turn on the Bluetooth device in the cell phone/ MID/computer and select the device name as DY29S” to connect. After connecting, user hear the indicated sound. When returning to Bluetooth mode.\Bluetooth speaker and the Mobile phone will be paired automatically

CLOCK MODE

• Automatically enter clock mode when booting.
• Press and ” ..it+ ” key to show time format from 12 to 24 hour or 24 to 12 hour.
• Press and hold the “MODE” key to enter the setting of Clock mode.Press the “MODE” key to
• select the flashing digits in seQuence year/month/dale/hour/minute and press  or to adjust the digits (year/month/date/hour/minute).
• Press the “MODE” key to confirm the setting.

ALARM MODE

• Press the “MODE” key to enter Alarm mode.
• Press and hold the “MODE” key to enter the setting of Alarm mode.
• Press the “MODE” key lo select the flashing digits in seQuence hour/minute and press ” M4t-” or ” ..it+ ” to adjust the digits (hour/minute).
• Press the “MODE” key to complete the setting and enter to select the alarm switch setting. Press “144t- ” or ” ..it+ ” to select “ON” alarm clock on, or “OFF” alarm clock off; then enter the alarm volume setting, press the “M4/ – ” ” ..ii+ ” Kay to adjust the volume.
• Press the “MODE” key to confirm and complete all settings. When the alarm sounds, the white light will gradually turn on.
• Touch “Speaker mesh ” to turn on the snooze function (5 minutes) or double-click “Speaker mesh ” to turn off the alarm.
•  If use MP3 file inside TF card for alarm sound. the User make a directory named as Alarm and store one MP3 file inside the alarm directory. Then insert TF card in the speaker.

MP3 PLAYER MODE

• Inserted TF card/U disk to enter MP3 player Mode.
• Press key to play/pause the song.
• Press key lo increase the volume. Press and hold  key lo play the next song.
• Press key lo decrease the volume. Press and hold key to play the previous song.

SLEEP TIMER

Press key to select the indicator in sequence 15 min, 30 min, 60 min to set the count downtime. No indicator lights on means Sleep Mode is Off,

• After 15mlns/30mlns/ 60mlns, the speaker and the nightlight will be turned otl .
• Next time you will want to use the sleep timer. Please need to set it again

SLEEP HELPER MODE) ( OPTIONAL)

The speaker with sleep helper is operated by IR remote control. This speaker has fifteen types of sleep helper sound for selection: Sound of the waves Sound of bugs  Burning sound White noise x Sound of thunderstorm  Sound of water  Sound of the wind Lullaby  2 Bird chirping Press the button to turn on the sleep helper, and press the corresponding button to select different sleep.

FAQ

No, power

| Chee!\Lithium Rechargeable Battery which has power or not Chee!\DC5V Plug which is plugged properly
---|---

No, sound or Sound distortion

| ****

Check the,leve l of volume which is not on zero status

Check music file which is damaged or not .The damaged music file produce sound distortion and cannot played .Please keep the good music files.

CheckLithium Rechargeable Battery which is not enough power.

Device hangup

| Long press the reset button (the button at the bottom of the fuselage). Switch

OFF the power then Switch ON the power again or After Charging, Switch ON the oower once again.

Specification

Built in lithium Rechargeable Battery

| ****

Play time : Max 4-5 Hours

• According to the level of Volume

MP3

| Outpu t power| 10W
MP3 Bit Rate| SK bps – 320K bps
Signal          noise

Ratio(SNR)

| 85dB
Signal Distortion| •  0.55%
Music Format| MP3
Operation temperature| -5 to 40 Celsius Degree

Product appearance, function and specification might change without prior notice.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>