EXOR EX715MG Control Panel for Extreme Conditions Installation Guide

June 4, 2024
EXOR

EX715MG Control Panel for Extreme Conditions
**Installation Guide

**

EX715MG
Installation guide

DIMENSION-CUT OUT

EXOR EX715MG Control Panel for Extreme Conditions - fig
2

CSD = 850mm/33.46” Minimum Compass Safe Distance of the standard compass

FIXING BRACKET

A) eX715MG
B) Cut out on a flat surface (min wall thickness 1.2mm)EXOR EX715MG Control
Panel for Extreme Conditions - fig 4

12 pieces
Tightening torque: 130Ncm or screw each fixing screw until the bezel corner gets in contact with the panel.

REARVIEW

EXOR EX715MG Control Panel for Extreme Conditions - fig
6

| Description
---|---
1| USB port V2.0, max. 500 mA
2| Ethernet port 2 (10/100 Mb)
3| Ethernet port 1 (10/100 Mb)
4| Serial port
5| Ethernet port 0 (10/100/1000 Mb)
6| Power supply
7| SD Card Slot
8| 2 Expansion slots for plugin modules

All ports are SELV (Safety Extra – Low Voltage).

POWER SUPPLY

Extra low voltage power supply EXOR EX715MG Control Panel for Extreme
Conditions - fig

DC Power Connector, Female – R/C Terminal Blocks (XCFR2), manufactured by Weidmuller Inc., Cat. No. BLZ 5.08, torque 4.5 lb-in
3 conductor 1,5mmq wire size minimum, minimum temperature conductor rating 105°C.
Don’t open the panel rear cover when the power supply is applied.
WARNING: Do not separate when energized.
The unit must always be grounded to the earth. Earth connection will have to be done using either the screw or the fast on terminal located near the power supply terminal block. Also, connect to ground terminal 3 on the power supply terminal block.
EXOR EX715MG Control Panel for Extreme Conditions - fig
1

**** Ensure that the power supply has enough power capacity for the operation of the equipment.

CONNECTIONS

EXOR EX715MG Control Panel for Extreme Conditions - fig
5

To operate in RS-485 pins 1-2 and 4-3 must be connected externally

DISPOSE OF BATTERIES

EXOR EX715MG Control Panel for Extreme Conditions -
fig 7

These devices are equipped with rechargeable Lithium batteries, not user- replaceable.
Dispose of batteries according to local regulations.
This device cannot be disposed of as domestic waste but according to WEEE European Directive 2012/19/EU

TECHNICAL DATA

Model eX715MG
Display / Backlight TFT Color / LED
Colors 16M
Resolution 1920X1080
Diagonal (inches) 15.6″ widescreen
Dimming yes
User memory flash 8GB
SD card slot yes
Recipe memory 2GB
Serial Port RS-232, RS-485, RS-422 software configurable
Ethernet port 2 10/100Mb,

1 10/100/1000Mb
USB port| 2 Host interface version 2.0
max. 500mA
Expansion slot| 2 Optional Plugin
Battery| rechargeable
Real-Time Clock| yes
Voltage| 24Vdc
Current rating (at 24VDC)| 1.35A
Weight| 5.2 Kg

The products have been designed for use in an industrial environment in compliance with the 2014/30/EU, 2011/65/EC directives
The products have been designed in compliance with:
EN 61000-6-4
EN 61000-6-2

EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
EN 61000-4-29

EN 60945
The installation of these devices into the residential, commercial, and light- industrial environments is allowed only in the case that special measures are taken in order to get conformity to IEC 61000-6-3.
Reproduction of the contents of this copyrighted document, in whole or part, without the written permission of Exor International S.p.A., is prohibited.

User Manual available on
www.exorint.com
MANEX715MGU001 V.1.00 28.02.2022
© 2022 Exor International S.p.A
Exor International S.p.A.
San Giovanni Lupatoto VR, Italy
www.exorint.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

EXOR User Manuals

Related Manuals