EXOR JSmart700M Series JSmart700M-WEB Powerful PoE Web Based HMIs Instruction Manual

EXOR JSmart700M Series JSmart700M-WEB Powerful PoE Web Based HMIs

Introduction

This Operating Instructions manual contains information regarding the installation, transportation, storage, use, and maintenance of HMI devices.

The following product models are covered by this manual:

memory, PoE Ethernet, Wi-Fi, NFC, JMobile runtime
JSmart710M| JS710GC2U5P1| HMI 10” TFT, 1280×800, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, NFC, JMobile runtime
JSmart715M| JS715GD2U5P1| HMI 15.6” TFT, 1366×768, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, NFC, JMobile runtime
JSmart721M| JS721GE2U5P1| HMI 21.5” TFT, 1920×1080, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-

Fi, NFC, JMobile runtime

| |
JSmart707M| JS707GB2U5PW| Web HMI 7” TFT, 1024×600, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, NFC, Web Browser
JSmart710M| JS710GC2U5PW| Web HMI 10” TFT, 1280×800, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, NFC, Web Browser
JSmart715M| JS715GD2U5PW| Web HMI 15.6” TFT, 1366×768, PCAP Touch, 8GB Flash memory, PoE Ethernet, Wi-Fi, NFC, Web Browser
JSmart721M| JS721GE2U5PW| Web HMI 21.5” TFT, 1920×1080, PCAP Touch, 8GB Flash memory, PoE Ethernet,

Wi-Fi, NFC, Web Browser

Safety Guide

• The manual contains safety standards that must be respected for personal safety and to avoid damage.
• Indications of attention are divided into three levels of severity:

DANGER: indicates a failure to observe safety rules and such failure may cause death or serious injuries.

ATTENTION: indicates a failure to observe safety rules and that deficiency may cause damage.

CAUTION: indicates a failure to observe safety rules and that deficiency may cause defects to the equipment or inconsistencies.

Product Overview

JSmart700M products are ideal for field installation in critical areas. High- resolution displays and multitouch PCAP touchscreen with a robust glass front; touchscreen/display bonding for fidget optical performance. Power-over- Ethernet (PoE) for maximum simplicity of connection using standard CAT5 wiring. The availability of a Wi-Fi interface enhances the device integration, while the NFC broadens the device applications. Full IP protection with the use of dedicated connectors for the maximum flexibility of installation, from mounting arm to a simple M22 hole. The JSmart700M product family has been optimized for use as an embedded browser or as a JMobile HMI device. Jsmart700M Web version is the ideal choice for all demanding IoT edge applications in factory, marine, and building automation where a powerful and performing HTML5 web browser is needed. The JSmart700M Web products include a Chromium-based HTML5 browser supporting kiosk mode operation. Supports Corvina Cloud secure connectivity.

• Chromium based HTML5 Browser
• Easy to use browser setting application

Standards and Approvals

The products have been designed for use in an industrial environment in compliance with the 2014/53/EU Directive. The products have been designed in compliance with:

• EN 61000-6-4
• EN 61000-6-2
• EN 61000-6-3
• EN 61000-6-1
• ETSI EN 301 489-1
• ETSI EN 301 489-3
• ETSI EN 301 489-17
• ETSI EN 300 328
• ETSI EN 300 330
• EN 62311
• EN 61010-1
• EN 61010-2-201

Standard radio signal and minimum distance from the body calculated according to EN 62311

• Standard radio signal: WiFi 2,4GHz
• Minimum distance from the body (cm) 2
• The WiFi antenna is positioned behind the black band above the display.

The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive 2011/65/EU In compliance with the above regulations the products are CE marked.

Product Identification

The product may be identified by the indications in the back cover. You will have to know the type of unit you are using for the correct usage of the information contained in the guide. An example of the information reported is shown below:

• product model name: JSmart707M
• year/week of production: 2127
• serial number: AA00011FV000000561AA
• manufacturer address: Exor International S.p.A.
  • Via Monte Fiorino 9
  • IT-37057 San Giovanni Lupatoto (VR)

Technical Specifications

• Touchscreen technology: Projected capacitive – Multitouch
• Back-up battery: 3V 7mAh Vanadium-Lithium, rechargeable, not user-replaceable, model VL1220.
  • Flash 8GB
  • RAM 2GB
• Hardware clock: Clock/Calendar with a backup battery
• Accuracy RTC: (at 25°C) <100ppm

Environmental conditions

• Operating temperature (surrounding air temperature): -20 ÷ +55°C (vertical installation)
  • EN 60068-2-14
• Storage temperature: -30 ÷ +80°C (JSmart707, 710)
• -20 ÷ +70°C (JSmart715, 721)
  • EN 60068-2-2
  • EN 60068-2-14
  • EN 60068-2-1
• Operating and storage humidity 5 ÷ 85 % RH non-condensing
• EN 60068-2-30
• Vibrations: 5 ÷ 9 Hz, 7 mm p-p EN 60068-2-6
  • 9 ÷ 150 Hz, 1 g
• Shock: ± 50 g, 11 ms, 3 pulses per axis EN 60068-2-27
• Protection class IP67 (requires appropriate connectors  and cables)
  • EN 60529

Electromagnetic Compatibility (EMC)

• Radiated disturbance test: Class A CISPR 22
  • CISPR 16-2-3
• Electrostatic discharge immunity test 8 kV (air electrostatic discharge) EN 61000-4-2
  • 4 kV (contact electrostatic discharge)
• Radiated, radio-frequency, electromagnetic field immunity test
• EN 61000-4-3
  • 80 MHz+1 GHz, 1OV/m
  • 1,4 GHz +2 GHz, 3 V/m
  • 2 GHz2.7 GHz, 1 V/m
• Burst immunity test
  • ± 2 KV dc power port
  • ± 1 KV signal line
  • EN 61000-4-4
• Surge immunity test
• EN 61000-4-5
• ± 0,5 KV dc power port (line to earth)
  • ± 0,5 KV dc power port (line to line)
  • ± 1 KV signal line (line to earth)
• Immunity to conducted disturbances induced by radiofrequency field
  • 0.15 ÷ 80 MHz, 10V
  • EN 61000-4-6
• Power frequency magnetic field immunity test
  • Enclosure, 50/60Hz, 30A/m
  • EN 61000-4-8

Durability information

Backlight service life (LED type)

40000 Hrs. or more (Time of continuous operation until the brightness of the backlight reaches 50% of the rated value when the Surrounding air temperature is 25°C. Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight quality/reliability/durability.)

Viewing angles

• For the viewing angles values (U,D,R,L) of the display types, see the technical data of the respective device.

The viewing angles are specified for the horizontal (L,R) and vertical (U,D) axes in reference to the vertical axis of the display. The specified viewing angles above always refer to the standard mounting orientation.

Surface resistance

Chemical resistance of the front glass for an exposure time of 24 hours without visible changes:

• Betadine (10% Povidone Solution)
• Cola
• Electrode Gel/Paste
• Hydrogen Peroxide (3% Solution)
• NaCl (0.9% Solution)
• Coffee
• Dextrose (5% Glucose Solution)
• Hydrogen chloride (0.5% Solution PH=1)
• Isopropyl Alcohol
• Sodium Hypochlorite
• Ethyl Alcohol (70%-90%)
• Quaternary ammonium compound

Properties multitouch PCAP touchscreen

Operation with gloves

Projected capacitive touch screens (PCAP) are suitable for operation with or without gloves. A large number of gloves (rubber gloves, light/heavy leather gloves, disposable latex gloves, etc.) are supported. Due to the variety of commercially available gloves, however, EXOR cannot guarantee all types.

Technical Data

64-bit RISC Quad core – 1.6 GHz
Operating System| Linux| Linux| Linux
Flash| 8GB| 8GB| 8GB
RAM| 2GB| 2GB| 2GB
Real Time Clock| yes| yes| yes
Ethernet port| 10/100 PoE 802.3af/at| 10/100 PoE 802.3af/at| 10/100 PoE 802.3af/at
USB port| 1 (Host v. 2.0, request special

connector)

| 1 (Host v. 2.0, request special

connector)

| 1 (Host v. 2.0, request special

connector)

Power supply| 802.3af| 802.3af| 802.3at
Current consumption| 12W| 14W| 23W
Battery| rechargeable| rechargeable| rechargeable
Weight| 0.7 Kg| 1.2 Kg| 4.0 Kg
Model| JSmart721M
---|---
Display / Backlight| TFT Color / LED
Colors| 16M
Resolution| 1920X1080
Diagonal (inches)| 21.5” widescreen
Viewing angles horizontal| Direction L / Direction R

Typ. 89°

Viewing angles vertical| Direction U / Direction D

Typ. 89°

Dimming| yes
CPU| 64-bit RISC Quad core – 1.6 GHz
Operating System| Linux
Flash| 8GB
RAM| 2GB
Real Time Clock| yes
Ethernet port| 10/100 PoE 802.3af/at
USB port| 1 (Host v. 2.0, request special

connector)

Power supply| 802.3bt
Current consumption| 35W
Battery| rechargeable
Weight| 6.0 Kg

Dimensions

Rearview

Installation Environment and procedure

Avoid prolonged exposition to direct sunlight to avoid the risk of overheating the device. The equipment is not intended for installation in contact with corrosive chemical compounds. Check the resistance of the front panel to a specific compound before installation. Do does not use tools of any kind (screwdrivers, etc.) to operate the touch screen of the panel. IP67 is guaranteed only if a JSCAxxxx cable is used and if:

• max deviation from the plane surface to the cut-out: O0.5mm
• the thickness of the case where is mounted the equipment: from 1,5mm to 3mm
• max surface roughness where the gasket is applied: O120 um.

CAUTION

• Tightening torque: 1000Ncm for nut, 130Ncm for screws

Safety instruction

• For all installation notes, please refer to the Installation Guide provided with the product.

Connections

Ethernet Port

The Ethernet port has two status indicators. Please see the description in the figure.

Power Supply, Grounding, and Shielding

The power supply terminal block is shown in the figure below.

• Use a shielded CAT 5 cable or higher

Note: Ensure that the power supply has enough power capacity for the operation of the equipment.

The unit must always be grounded to earth with a shielded CAT 5 cable. Grounding helps limit the effects of noise due to electromagnetic interference on the control system. The earth connection can also be made using the screws located near the connector. A label helps identify the ground connection. All the electronic devices in the control system must be properly grounded. Grounding must be performed according to applicable regulations.

Battery

These devices are equipped with rechargeable Lithium batteries, not user- replaceable. The following information is maintained by the battery:

• hardware real-time clock (date and time)

Charge

• At first installation must be charged for 48 hours.
• When the battery is fully charged, it ensures a period of 3 months of date and time back-up at 25°C.

Battery

ATTENTION

• Dispose of batteries according to local regulations.
• This device cannot be disposed of as domestic waste but according to WEEE European Directive 2012/19/EU

Special Instruction for Use

• The equipment shall only be used in an area of not more than pollution degree 2, as defined in IEC/EN 60664-1.
• The equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 in accordance with IEC/EN 60079-15.
• Transient protection shall be provided that is set at a level not exceeding 140 % of the peak rated voltage value at the supply terminals to the equipment.
• Install the HMI device according to the accompanying installation instructions.
• Ground the HMI device according to the accompanying installation instructions.
• Only qualified personnel may install the HMI device or repair it.
• Care shall be taken not to allow layers of dust to form on the graphic panel in a way that might cause the accumulation of static charges. Keep the faceplate of the HMI device clean: the equipment must be cleaned only with a soft cloth and neutral soap product.
• Do not use solvents.
• This device should not be used for purposes and methods other than indicated in this document and in the documentation accompanying the product.

Getting Started

JSmart 700M HMI products delivery configuration is based on a loader. Use the services of the loader to install applications on the device such as JMobile runtime or browsers. JMobile Studio version V4.5 or higher is required. JMobile Studio is a software tool that must be properly installed on a computer running Microsoft Windows.

There are two options to transfer a JMobile application project to an HMI device:

Ethernet: Connect the HMI device to the computer with an Ethernet network. In JMobile Studio select the command Run/Download to target. You may have to ensure that the proper firewall policy has been configured in the computer to allow JMobile Studio to access the network.

USB: Create an Update Package using JMobile Studio and copy it to a USB Flash drive (to transfer via USB, use the dedicated accessory cable).

Updated product documentation is available at www.exorint.com.
For the products described in this manual please check:

• Systems Settings User Manual
• JMobile Studio User Manual
• Web Browser User Manual

Unpacking and Packing Instructions

To repack the unit, please follow the instructions backward.

References

• Exor Open Source Code Distribution Service

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>