PYS-WPC20076-01 Plastic Shell Separate Super Magnetic Wireless Fast Charging Base User Manual
- June 5, 2024
- PYS
Table of Contents
Plastic Shell Separate Super Magnetic
Wireless Fast Charging Base(15W）
(PYS-WPC20076-01 )
User manual
To ensures safety, please read this manual carefully before use and follow the instructions therein. Store this manual in a secure place for future reference. This product is used to charge DC input mobile phones and other electronic devices.
Technical specifications
| product name | Pfalsatsctihcasrhgeinllgsebpaasera(1te5Wsu）per magnetic wireless |
|---|---|
| product model | PYS-WPC20076-01 |
| Input | PD 5V 2A 9V 2.22A |
| Output | 5V 1A 9V 1.12A 9V 1.67A |
| Power | 5W/7.5W/10W/15W |
| Product Size | 62624.2mm |
| product weight | About 46g |
| Otepmepraetriantgure | 0℃~40℃ |
Note: To ensure a good conversion efficiency during the charging process, please connect to a mobile phone standard 5V2A charger or 9V charger with fast charging function when using.
Schematic diagram of the product interface
Wireless charging induced field
Wireless charging mobile phone charging diagram
Note: Please check whether your device supports wireless charging before using this product for charging!
Indicator status description
LED indicator| LED
indicator status| Roffedblliugeht light off| Roffedblliugeht light on
---|---|---|---
Csthaaturgsing| PanodweErnotenr standby| Tishcehdaergviinceg
LED indicator| RBeludelilgighhttoonn| Rbleudelliigghhttoonff|
Rbleudelliigghhttoonff
---|---|---|---
Tfuhlelydcehvaircgeeids| Tcohretiagenisbnaomdtyetal
seonsincgtiargeahe
| Report an error
Cautions
Do not place this product on carpets, heaters, or fabric materials, or expose
them to direct sunlight.
Do not drop, squeeze, disassemble or puncture this product by yourself.
Do not place this product in a high-temperature, humid environment.
Do not throw this product into fire, water, or liquid containing corrosiveness.
Please keep the temperature between 0℃~35℃ during charging.
Do not place this product on flammable materials (beds and blankets) while
charging.
If you find that the product has swelling or other undesirable phenomena and
malfunctions, please stop using the product immediately and contact your
dealer.
Unless a professional is nearby to supervise and guide and ensure the safety of the user, the following people(including children) are not suitable to use this product: people with deteriorating physical function or mental capacity, those with insufficient knowledge of this equipment, and lack of operating experience, Be sure to supervise children to ensure safe use.
Name and content of hazardous substances in the product
Part Name|
Harmful Substance
Pb
|
Hg
|
Cd
|
Cr6+
|
PBB
|
PBDE
Circuit board assembly|
X
|
0
|
0
|
0
|
0
|
0
Hardware parts|
X
|
0
|
0
|
0
|
0
|
0
Plastic parts|
0
|
0
|
0
|
0
|
0
|
0
Accessories|
0
|
0
|
0
|
0
|
0
|
0
This form is compiled in accordance with SJ/T 11364-2014.
O: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement of GB/T 26572.
X: Indicates that the hazardous substance contained in at least one of the
homogeneous materials of the part exceeds
Note:
- The environmental protection service life marked on this product only applies to the product working under the conditions specified in the user manual.
- The reason why this product is marked with “X” is that there is no alternative technology or component to choose from at this stage.
This product still meets the restriction requirements of the EU RoHS Directive 2015/863/EU.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements,This
equipment should be installed and operated with a minimum distance of 20 cm
between the radiator.
Warranty Card
Warranty period:
The warranty period of this product is valid within 12 months from the date of
purchase.
Free service:
During the product warranty period, for any faults caused by the quality of
the product itself, the user is requested to contact the dealer with this
warranty card and purchase a certificate to enjoy a free warranty.
Free maintenance is not available in the following situations:
- The product warranty period exceeds the period;
- No warranty card or damaged product label;
- Failure to use in accordance with the instructions, or damage caused by the use of non-original accessories;
- Damage caused by yourself dismantling and repairing;
- Failure caused by water ingress or falling and Man-made mechanical damage;
- Failure or damage caused by force majeure;
- Counterfeit and shoddy products are purchased through informal channels. Customer Service Information:
Customer Name|
---|---
Contact address|
Contact number|
Product name|
Product model|
Purchase date|
Sellers|
S/N number|
Maintenance records|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>