PYS High-Tech 2AU7D TWS Bluetooth Earbuds Instruction Manual

PYS High-Tech 2AU7D TWS Bluetooth Earbuds

Product Description

1. Multi-function touch button
2. Earbud indicator/microphone
3. Earbud cap
4. charging compartment indicator
5. charging thimble
6. Type-C USB charging port

Power on/off

• Auto power on: Take it out of the charging box and power it on automatically.
• Manual power on: When the headset is off, press and hold the touch key for 3s to manually power on.
• Auto power off: Put it into the charging box and shut down automatically.
• Manual power off: When the phone is not connected, press and hold the touch key for 5s to shut down manually.
• Note: If it is not connected to any device within 2 minutes, it will automatically shut down.

Bluetooth pairing

1. Open the charging compartment and take out the earbud to turn it on automatically.
2. After turning on, put the left and right earphones close to each other. After the team is successful, the indicator light: one earphone flashes red and blue lights alternately, and the other has no reminder light.
3. Open the phone’s Bluetooth connection interface, search for “JX11C”, click pair, then the connection is successful and accompanied by a tone.
   • Music pause/play: During playback, short press the multi-touch button.
   • Previous song: Double-click the left ear multi-function touch button.
   • Next song: Double-click the right ear multi-function touch button.

Wake up voice assistant function (requires mobile phone support)

After successfully connecting with the mobile phone, except during a call, press the multi-function touch key three times to activate the voice assistant function (SIRI).

• Answer: When a call comes in, short press the multi-function touch key.
• Reject: When there is an incoming call, press and hold the multi-function button for 2 seconds.
• Hang up: During a call, short press the multi-function touch key.

Headset restore factory settings

When the headset is not connected to the mobile phone, the red and blue lights will light up at the same time when the headset is tapped 5 times. Restore factory settings successfully.

Charging

The charging compartment is charged by the charging line, and after the full charging, the 4 indicator lights of the battery compartment should be on. The earbud is placed in the charging compartment, and automatically charged, and the earbud indicator is off after being fully charged.

Specifications

• Model: RVTWSBLK, RVTWSWHT, RVTWSCLR
• Bluetooth version: 5.3
• Single earbud weight: 4g
• Earbud size: 20.81824MM
• Earbud battery capacity: 3.7V/2*50mAh
• Earbud charging time: about 1 hour
• Play music time: about 7 hours(Medium volume)
• Support Agreement: SPP / HFP / A2DP / AVCTP / HID
• Frequency: 2.4GHz~2.48GHz
• Bluetooth distance: 10M
• Power input: DC 5V/500mA
• Charging bin to charge the earbud: 2 times
• Charging bin size: 543628mm
• Charging bin weight: 33g
• FCC ID :2AU7D-REVIEWS
• ISED: 28661-RVTWS

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>