ALOGIC ULQC10W Ultra Wireless Charging Pad User Guide
- June 5, 2024
- ALOGIC
Table of Contents
Welcome to ALOGIC
Quick Start Guide
Note
- Do not intentionally damage this product and do not expose it to moisture, direct sunlight, or high temperatures.
- If improper use, destruction, or improper operation leads to damage to your device or product, our company is not liable for damages or maintenance.
Introduction
The ALOGIC Ultra Wireless Charging Pad 10W is an efficient, portable and safe charger for your Qi-enabled devices such as your Apple or Samsung smart-phone. The charger is equipped with Oi technology to allow fast charging for your device at an optimal and safe speed. Use the charging pad with an adapter that is equipped with Quick Charge 2.0 to activate Fast Charging.
Specifications
Model ULQCIOW| Color Code
SGR-GUNZ
SLV-GUNZ
---|---
Input| USB-C 5V/ 2A or 9V/ 1.67A
Output| Up to 10W
Warranty| 2 Years
a) Power transfer frequency is less that 1 MHz:112.18kHz to 175.64kHz b) Output power from each primary coil is less than or equal to 15 watts:10 watts C) H-field: -5dB µ A/m at 10m
Features
- Wireless charging supports up to 10W and is optimized with 7.5W for iPhones for an ideal charging speed
- Qi-enabled accessories such as wireless earphones can also be charged
- Crafted with a fabric top and metal alloy base with a chrome finish for a minimalistic design
- Oi certified to ensure optimal charging
- Features LED indicators for an at glance charging status
- Foreign object detection indicator
Package Contents
- Ultra Wireless Charging Pad
- 1m USB-C to USB-A cable
- User manual
Physical Layout
- USB-C es Qi Charging Surface
- LED indicator
Operating Instructions
- To commence fast charging, connect the Ultra Wireless Charging Pad via the provided cable to a Quick Charge 2.0 wall adapter. A solid white LED light will appear to indicate that the device is on and in standby mode.
- Place your 0i-enabled device on top of the charging pad. Make sure that the center of your device is aligned with the Qi logo on top.
- The LED lights will blink white to indicate that a successful connection has been established and charging has commenced.
- In the event that a foreign object is detected, or if your device is emitting a high temperature, then the LED indicator will turn red as per the table below.
`Wall adapter not included
Understanding the LED lights and their meanings
- Slow Breathing White LED (3-second intervals) indicates charging is in progress
- Very Slow Breathing (6-second intervals) indicates that the device is fully charged
- A solid White LED indicates the device is fully charged or the charger is ready to be used
- Flashing Red LED when foreign object detection (FOD) is activated Solid Red LED when over temperature is detected
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
www.alogic.co
European Importer
ALOGIC UK Pvt Ltd
Level 3, Belmont,
Belmont Road,
Uxbridge, UB81HE, U
Manufacturer
ALOGIC Corporation
Level 40,140 William Street
Melbourne VIC 3000
Australia