WYZE WLPPO1 Wi-Fi Outdoor Plug Instruction Manual
- June 5, 2024
- Wyze
Table of Contents
WYZE WLPPO1 Wi-Fi Outdoor Plug Instruction Manual
AC Adaptor
Input: 120V~60Hz 2 outlets Output: Maximum 1875W for Resistive load
1) Download apps:
IOS version please search and download Wyze app at app-store, Android version please search and download Wyze app from Google Play. Or you may also scan below QR code to download.https://fir.im/tshl?utm_source=fir&utm_medium=qr&release_id=5d31937323389f13956a317ahttp://d.7short.com/gapv?utm_source=fir&utm_medium=qr
2) Operation
Plug-in adaptor into wall outlet or movable socket-outlets, Press can cause it to sink into the tabletop.
3) Operation
3.1) Operation on/off by manual
– Press push- button ON to switch on if current mode is OFF.
– Press push-button OFF to switch off if current mode is ON
3.2) Operation on/off by Apps Pairing
- a) Please hold press button more than 5 seconds till red indicator lighting flash quickly., then release the button, you could add your electronic device into your APP now. Please reference the “QUICK START GUIDE” to learn details.
- b) The blue indicator light, pairing is succeed, then could control your device via APPS.
- c) When the red light is not lit or the blue light is not flashing, hold press button more than 10 seconds, the blue indicator will flash quickly, then release the button, red indicator flash quickly, means reset succeed, then you could pairing again.
3.3) Indicator status of Gateway
4) Fault finding
a) No activation:
– Check setting program successful
– Check wifi router connection
b) No response
– -Check if the socket has electricity, try changing it to another place
– -Try changing a device
5) Important Notes
a) DO NOT OVERLOAD.
b) To install the product needed by a qualified electrician.
6) Direction!
– Installation must be done by people having knowledge and experience in
electrical connections
– Improper installation can cause danger for your own life the life of
everyone using the electrical appliance
– Improper installation can cause damage of property e.g. fire
– You are personally liable for damage of property or humans
7) Warning!
For your safety, please read the following cautions before installing or using
your device.
– Do not open the device or attempt to repair or service it.
– Use the device in a dry location, and avoid placing it in a humid
environment.
– Do not submerge the device in liquid or attempt to clean it with liquids or
solvents. To clean the device, disconnect it from the power outlet and use a
damp towel.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Please note that changes or modifications of this product is not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>