SOMOGYI FMBT MIC Car Speaker and Charger Instruction Manual

SOMOGYI FMBT MIC Car Speaker and Charger Instruction Manual

STRUCTURE

1. 2,4A fast charger
2. USB music and 1,0A charger
3. volume down, scroll backward
4. FM frequency
5. play, pause
6. volume up, scroll forward
7. LED display
8. microSD socket
9. answer call, hang up call, voice assistant

CAR HANDSFREE CHARGER

WARNINGS

• Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language. This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision. After unpacking the unit, confirm that it has not been damaged during transit. Keep the packaging away from children if it contains plastic bags or other potentially hazardous components.
• Observe the parameters of the device to be charged and check the manufacturer’s instructions written in its instruction manual. Do not use with a device, which’s manufacturer requires otherwise.
• Do not connect the device to the charger when starting and stopping the engine.
• Remove it from the vehicle socket when not in use.
• Poor radio reception or a short antenna may interfere with operation.
• Position it so that it does not obstruct safe driving.
• To avoid the risk of accidents, do not make any adjustments while driving.
• Protect it from dust, humidity, liquids, heat, dampness, frost, shock and direct thermal radiation or sunshine! Use only indoor, in dry circumstances.
• Make sure that no foreign objects can get through the openings.
• There may be differences between the different audio files, due to their different parameters of volume and sound quality
• Improper installation or improper handling invalidates the warranty.
• If the product has reached the end of its service life, it is classified as hazardous waste together with its battery. Handle in accordance with local regulations.
• Somogyi Elektronic Ltd. certifies that this radio-equipment conforms to 2014/53/EU directive. Full text of EU Declaration of Conformity is available at the following address:somogyi@somogyi.hu
• Due to continuous improvements the design and specifications may change without any prior notice. The actual instruction manual can be downloaded from www.somogyi.hu website.
• We don’t take the responsibility for printing errors and apologize if there’s any.

DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

DISPOSING OF ALKALINE AND RECHARGEABLE BATTERIES

Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment- friendly way.

CAN BE PLACED ON THE DASHBOARD, WITH PROFESSIONAL MICROPHONE

• 5in1: BT handsfree + FM transmitter + double USB fast charger + music player + battery voltmeter
• Listen to music and make phone calls on the car radio
• Can be placed on the dashboard, professional microphone, with ~60 cm tangle-free cable and control button
• Telephone conversation without touching the phone
• Answer or reject incoming calls, dial call number
• Scroll to next track, remote control the music player
• Activate voice assistant (Siri/ Google Assistant)
• Voice announcement of caller ID (English)
• Double USB fast charger: 2,4A + 1,0A
• Measures the vehicle battery voltage
• You can check the condition of the car battery
• Can be used in 12/24 V vehicles

INSTALLATION

1. Connect the device to the 12/24V cigarette lighter socket of the vehicle so that the display is clearly visible. After insertion, do not try to turn the plug in the socket! If necessary, pull it out and turn it to the correct position, then plug it in again until it stops.
2. Turn on the car radio, and then search for an FM frequency where you cannot hear a radio program, only a steady whisper. Use manual fine-tuning instead of automatic tuning! Record this “blank” frequency on a storage location, such as the last one. You will need to select this serial number on the car sound system later if you want to listen to the BT-FM transmitter.
3. Set the same frequency on the unit as follows. Press the CH button for ~3 seconds, then after the current frequency flashes, use the scroll buttons to search for the desired value. Noise from the speakers is eliminated. After a few seconds, it automatically exits the setting mode and the selected value is stored.
4. The display briefly shows the voltage of the vehicle battery after plugging in the device, followed by BT caption and the current frequency.
5. BT indication flashes on the display until it is connected to the phone. After that, the frequency display is continuous. 6. Unplug the device to turn it off.

WIRELESS BT CONNECTION

The device can be paired with other equipment which is communicating by BT protocol within a range of 10 meters. After that, music which is played by mobile phone. You can hear the phone conversation amplified on the car speakers. When the BT indicator flashes, search for nearby BT devices, including this unit, as described in the instruction manual of the device to be paired. Connect the two devices to each other, after which the BT indication disappears and the frequency is visible on the display

• Next time, the two devices will recognize each other and connect automatically.
• A BT-FM transmitter can be paired with one BT device at the same time.
• If the phone asks for a password, enter “0000” or “1234”
• The current range depends on the other device and the environmental conditions.
• The compatibility of the BT function and the product depends on the mobile phone, so its operation cannot be guaranteed in all cases.

WIRELESS MUSIC PLAYBACK

If you start the music player on the paired phone, you can listen to the songs in good quality through the car radio speakers. You can control the phone from the device by briefly pressing the buttons. Use the up / down buttons to scroll forward-backward the tracks, and hold the button pressed to control the volume. You can follow the current volume level on the display. Use the play button to pause or resume playback.

• It is not recommended to set the rotary knob to a maximum volume higher than 4/5 (V00… V30). Too high level can cause distorted sounding, while a low level results in more noise. The correct setting depends on the car radio and the quality of the audio, its recorded volume, and the compression program used to create it. The volume is also affected by the car radio settings.
• To manage tracks properly, you usually need to create a playlist in the music player application. Otherwise, the scroll buttons may work differently.

RECEIVING AND MAKING TELEPHONE CALLS

When you receive a call, the number is heard in English, depending on the service provider and device settings, and then a ringtone is played. This can be heard from the car speakers when the car radio is tuned to a previously recorded frequency – for example, because you are listening to music from your phone. If you are listening to a radio program while the phone is ringing, switch the radio to the previously selected storage location, the pre-recorded frequency.

An incoming call is also indicated by the message CALL on the display and the flashing LED next to the microphone. You can answer the incoming call by briefly pressing the flashing button. You can hang up the conversation by pressing it again. Double-pressing the button calls back the last phone number. You can hear your partner through the car speakers. If music does not resume when you have finished talking, press the play button.

Make a call: make a call with your phone and listen to it through the car speakers, hang it up with the BT-FM transmitter’s button next to the microphone

Call back: double-pressing the button dials the last number in the call list (depending on the phone settings, it may be necessary to operate the phone, e.g. if there are 2 SIM cards)

Answer incoming call: press the lighting button next to the microphone and you can answer the call without touching the phone

Hang up call: during the call, press this button

Reject incoming call: while the phone is ringing, press this button long (~3 sec)

Switch to private mode: during call, press this button long (~3 sec)

Activate voice assistant: hold pressed this button long (~2 sec) (Siri/Google Assistant)

• Keep in mind that driving noise, an open window, and a ventilating fan can impair the intelligibility of your voice with the other party. Speak in the direction of the microphone, attach its self-adhesive tape to the dashboard.
• Caller ID announcement is available depending on the mobile service provider.
• The availability of voice assistant also depends on the phone type, setting and geographical area.
• When you return to range or after you turn it on, it will automatically reconnect to a previously paired and properly connected device if it is turned on nearby.
• The volume and sound quality are affected by adjusting the volume and tone of the external source. It is recommended that you install an equalizer app on your mobile device and customize the sound to your taste.
• The nominal range is 10 meters, ideally, in an open space, in the absence of foreign objects or persons, for non-moving devices. This is affected by the characteristics of the connected devices and the environment (e.g. walls, human bodies, other electrical devices…).
• If you move away from the connected device, the connection will be lost. When you return to your vicinity again, it will automatically reconnect. If music playback does not resume, press the play button. If you have a connection problem, turn the earphone or BT on your phone on and off
• Abnormal operation or noise may be caused by nearby radio frequency devices, this does not indicate a malfunction of the device.
• In some cases, the BT function may be limited due to the unique features of your phone.
• If your phone has special applications (such as voice control), your device may respond differently to the instructions.
• When not in use, the radio transmitter part of the modulator can be switched off within a short time, this time the radio speakers hums

MP3, WMA, WAV, FLAC MUSIC PLAYBACK (FROM USB/MICROSD DEVICE)

Carefully insert a USB or microSD device that contains songs and playback will start automatically. Use the buttons next to the microphone or the play-pause buttons to start and the buttons to select the desired track. You can adjust the volume by pressing and holding the scroll buttons.

• When you receive a call while playing music, it automatically switches to phone mode.
• In music player mode, press and hold (~2sec) the play button to switch between BT and USB/microSD modes.
• Do not remove the memory card or USB device during playback, as this may damage the data.
• Recommended file system: FAT32. Do not use an NTFS formatted memory unit.
• When you insert a memory unit, playback starts from the first song. If you have listened to before, playback from the last track selected will resume even if you turn off the power and remove the device.
• The individual characteristics of the mass storage device may cause a malfunction, this does not indicate the malfunction of the device.
• Do not store different types of files on the memory card other than playable files, as this may slow down or prevent playback.

USB CHARGER OUTPUTS

Two external devices can be charged at the same time. The left USB socket provides 2.4 Ampere high-speed fast charging. The socket on the right can be used for 1.0 Ampere charging. If the charging cable has a lower load capacity, the charging time will increase.

• Observe the parameters of the device to be charged and check the manufacturer’s instructions written in its instruction manual. Do not use with a device, which’s manufacturer requires otherwise.
• When charging is complete, disconnect the charging cables.
• Built-in protection: against short circuit, overload and overheating. In case of a fault, the charger switches off. Unplug the faulty charging cable and it restarts.

BUILT-IN BATTERY VOLTAGE METER

After plugging in, the display will first show the voltage of the cigarette lighter socket. Shows the vehicle battery voltage (e.g. 12.0 Volts) with the engine stopped. Based on this, the battery charge level and the degree of wear can be estimated. Ideally, this value is above 12 V. If the vehicle’s generator or electrical system is defective, or the battery is old, the value will be lower. In a cold or unused car for a long time, the voltage may drop faster, making it impossible to start the vehicle. In this case, it is advisable to start the engine from time to time for 15-20 minutes to prevent complete discharge.

Start the engine and the instrument should show a value around 14,4 V. At significantly lower values, the generator will not charge the battery properly, and higher values may overcharge. If you switch on the consumers (radio, lighting, wipers, heating…), the voltage value may change only slightly. An old, worn-out battery cannot be charged properly.

• The voltmeter can increase operational safety
• Check the condition of the car battery before starting
• Check the charge with the engine running
• Prevent starting difficulties in winter or when not in use for a long time
• See if your old battery is worn out and needs to be replaced

CLEANING, MAINTENANCE

Keep cigarette lighter, the USB sockets and plugs clean and dry for perfect contact. Use a soft, dry cloth. Do not use cleaning products. Do not spill liquid on or inside the device. It does not require special maintenance, in case of abnormalities turn it off and contact a specialist.

producer/gyártó/výrobca/producător/proizvođač/výrobce/proizvođač: Somogyi Elektronic Kft.
H – 9027 • Győr, Gesztenyefa út 3. • www.somogyi.hu
Származási hely: Kína

Distribútor: Somogyi Elektronic Slovensko s. r. o.
Ul. gen. Klapku 77, 945 01 Komárno, SK,
Tel.: +421/0/35 7902400 • www.somogyi.sk
Krajina pôvodu: Čína

Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195 Cluj-Napoca, judeţul
Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 • www.somogyi.ro
Ţara de origine: China • Producător: Somogyi Elektronic Kft

Uvoznik za SRB: ELEMENTA d.o.o.
Jovana Mikića 56, 24000 Subotica, Srbija • Tel:+381(0)24 686 270 • www.elementa.rs
Zemlja uvoza: Mađarska • Zemlja porekla: Kina • Proizvođač: Somogyi Elektronic Kft.

Uvoznik za HR: ZED d.o.o.
Industrijska c. 5, 10360 Sesvete, Hrvatska • Tel: +385 1 2006 148 • www.zed.hr
Uvoznik za BiH: DIGITALIS d.o.o.
M.Spahe 2A/30, 72290 Novi Travnik, BiH • Tel: +387 61 095 095 • www.digitalis.ba
Zemlja podrijetla: Kina • Proizvođač: Somogyi Elektronic Kft, Gesztenyefa ut 3, 9027 Gyor, Mađarska

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>