SIRUS 562012 Drop 4 Passive Speaker User Manual

SIRUS 562012 Drop 4 Passive Speaker

Product Information

Specifications

• Product: Drop 4, Drop 6 Passive Speaker
• Date: 29.01.2024
• ID: 562012, 562013, 562014, 562015

General Information
The Drop 4, and Drop 6 Passive Speaker is a sound reinforcement device designed for specific use. It is important to follow the instructions provided in the user manual to ensure safe and proper usage of the product.

Symbols and Signal Words
In this document, the following symbols and signal words are used:

• DANGER! – This combination of symbol and signal word indicates an immediately dangerous situation that will result in death or serious injury if it is not avoided.
• WARNING! – This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
• NOTICE! – This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided.

Safety Instructions
It is crucial to adhere to the safety instructions provided to prevent personal injury or property damage.

Intended Use
The Drop 4, and Drop 6 Passive Speaker is specifically designed for sound reinforcement. It should only be used as described in the user manual. Any other use or use under different operating conditions is considered improper and may result in personal injury or property damage. The manufacturer will not be liable for damages resulting from improper use.

Safety
Ensure the following safety precautions are taken when using the product:

• DANGER! – There is a risk of injury and choking hazard for children. Keep the product away from children to prevent accidents.
• WARNING! – Operating the device at a high volume may cause hearing damage. Prolonged exposure to even seemingly uncritical volume levels can result in hearing impairment. If you experience ringing in your ears or hearing impairment, decrease the volume level immediately or keep a greater distance from the device. Adequate ear-muffs can also be used for protection.

Features
The Drop 4 (item no. 562012, 562013) offers the following features:

• Insert feature 1 here
• Insert feature 2 here
• Insert feature 3 here

Installation
Follow the installation instructions provided in the user manual to ensure proper setup of the Drop 4, and Drop 6 Passive Speaker.

FAQ

Q: Can the Drop 4, and Drop 6 Passive Speaker be used outdoors?
A: The user manual does not specify whether the product is suitable for outdoor use. It is recommended to contact the manufacturer for further information.

Q: Can the Drop 4, and Drop 6 Passive Speaker be connected to other audio devices?
A: Yes, the Drop 4, and Drop 6 Passive Speaker can be connected to other audio devices using the appropriate cables. Refer to the user manual for detailed instructions on how to make the connections.

• Thomann GmbH
• Hans-Thomann-Straße 1
• 96138 Burgebrach Germany
• Telephone: +49 (0) 9546 9223-0
• Internet: www.thomann.de
• 29.01.2024, ID: 562012, 562013, 562014, 562015

General information

This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference.Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document. Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.

Symbols and signal words

In this section, you will find an overview of the meaning of symbols and signal words that are used in this document.

immediate dangerous situation that will result in death or serious injury if it is not avoided.
WARNING!| This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided.
 |
Warning signs| Type of danger
| Warning – danger zone.

Safety instructions

Intended use

This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Safety
DANGER!
Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with.

WARNING!
Possible hearing damage due to operating the device at a high volume!
The device can produce volume levels that, when operated at a high volume, may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Avoid operating the device at excessively high volumes over an extended period of time. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use adequate ear-muffs.

Features

Drop 4 (item no. 562012, 562013)

• Configuration: 1 × 0.75-inch tweeter, 1 × 4-inch woofer
• OBE technology (Optimal Bass Enhancement Radiator)
• Transformer for 100 V/70 V (2.5 W/5 W/10 W/20 W)
• Pluggable screw terminal connections
• Wall bracket, pendulum holder, and ground spike included in the delivery
• Weatherproof thanks to International Protection Rating IP66
• Housing color: black (item no. 562012), white (item no. 562013)

Drop 6 (item no. 562014, 562015)

• Configuration: 1 × 1-inch tweeter, 1 × 6.5-inch woofer
• OBE technology (Optimal Bass Enhancement Radiator)
• Transformer for 100 V/70 V (5 W/10 W/20 W/40 W)
• Pluggable screw terminal connections
• Wall bracket, pendulum holder, and ground spike included in the delivery
• Weatherproof thanks to International Protection Rating IP66
• Housing color: black (item no. 562014), white (item no. 562015)

Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.

NOTICE!
Possible property damage to adjacent devices due to magnetic fields.
Speakers generate a static magnetic field. This magnetic field can affect other neighbouring units and in unfavorable cases damage them. Ensure that speakers are always a sufficient distance away from sensitive equipment that may be affected by an external magnetic field.

NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions. If operated with pendant speakers, the device may only be operated indoors (wind force).

Mounting
Accessories

• 2x screws for cable holder (3.5 × 10 mm)
• 4x screws for attaching the wall bracket to the ground spike (5 × 25 mm)
• 1x screw for mounting the ground spike (5 × 25 mm)
• Snap ring
• Spike
• Threaded nut
• Ringbolt
• Safety cable
• 2x snap hooks
• Floor plate
• Product cover (suspension)

The supplied screws are not suitable for wall mounting. Before mounting, the ring bolt must be countered with the included snap ring and the threaded nut so that the ring bolt can only be loosened with a tool. Before mounting, make sure that all the slinging gear is approved for the specific application! The device is only suitable for permanent installation.

Preparations

1. Connect the cables of the amplifier to the screw terminals of the speaker.
2. Screw the screw terminals to the speaker with 2 screws (3.5 × 10 mm).
3. Thread the cable through the device cover.
4. Attach the device cover to the speaker

Wall mounting

1. Check the condition of the surface and screw the bracket to the wall with 4 suitable screws.
2. Screw the speaker to the stud of the bracket.

Ceiling installation

1. Screw the ring eye into the top of the speaker and counter the ring eye with the supplied threaded nut and the snap ring.
2. Thread the wire rope through the ring eye and the ceiling suspension. The holding bracket must be approved on-site for the application and the weight.
3. Lock the wire rope with two snap hooks and screw the snap hooks shut.
4. Attach the cables of the speaker to the wire rope with suitable cable ties.

Earth mounting

1. Screw the bracket to the ground spike with 4 screws (5 × 25 mm).
2. If required, screw the base plate to the ground spike with the screw (5 × 25 mm). Then screw the base plate to suitable floor material (e.g. wood).
3. Screw the speaker to the stud of the bracket.
4. Route the cable of the amplifier through the device cover and attach the device cover to the speaker.
5. Insert the ground spike completely in the ground.

Power tap

Use the selector switch on the rear of the device to select the setting for the power tap. The following table shows the possible settings

Tips on handling speakers

• We recommend you set up the speakers in a way, that their sound signals can reach the audience unobstructedly.
• Always use high-grade cables to connect your equipment. Otherwise, you won’t reach maximum sound quality.
• For optimum results both impedance and power handling of the speakers must match the requirements of the amplifier. Always follow the technical specifications of all equipment involved!
• The overall impedance of the connected loudspeakers must not exceed the minimum output impedance of the amp. The amps max. RMS output power should be 50 % above the power handling capacity of the connected speakers.
• If you notice distortion during operation, either the amp or the speaker is overloaded. This may permanently damage the amp or the speaker. Always reduce the volume as soon as you notice distortion.

Technical specifications

Drop 4 (item no. 562012, 562013)

Configuration| 1 × 0.75-inch tweeter

1 × 4-inch woofer

---|---
Input connections| Screw terminals
Frequency response (+/-3 dB)| 80 Hz…20 kHz
Load Capacity| 20 W (RMS)

40 W (peak)

Sensitivity (1 W/1 m)| 83 dB
Rated impedance| 8 Ω
Sound pressure level| 92 dB
Beam angle (H × V)| 100° × 95°
International Protection Rating| IP66
Dimensions (Ø × H)| 148 mm × 230 mm
Weight| 2.1 kg
---|---
Color| black (item no. 562012), white (item no. 562013)
Ambient conditions| Temperature range| 0 °C…40 °C
Relative humidity| 20%…80% (non-condensing)

Frequency response

Polar pattern

1. vertical,
2. horizontal

Drop 6 (item no. 562014, 562015)

Configuration| 1 × 1-inch tweeter

1 × 6.5-inch woofer

---|---
Input connections| Screw terminals
Frequency response (+/-3 dB)| 47 Hz…20 kHz
Load capacity| 40 W (RMS)

60 W (peak)

Sensitivity (1 W/1 m)| 85 dB
Rated impedance| 8 Ω
Sound pressure level| 94.5 dB
Beam angle (H × V)| 55° × 55°
International Protection Rating| IP66
Dimensions (Ø × H)| 215 mm × 282 mm
Weight| 3.5 kg
Colour| black (item no. 562014), white (item no. 562015)

Ambient conditions

Frequency response

Polar pattern

1. vertical,
2. horizontal

Protecting the environment

Disposal of the packing material|
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.

Observe the disposal note regarding documentation in France

Disposal of your old device
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility. When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility. Proper disposal protects the environment as well as the health of your fellow human beings. Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. You can return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de. If your old device contains personal data, delete that data before disposing of it.

References

• Buy musical instruments online from the market leader – Thomann United States

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>