OUTDOOR ROUTER EZR34T Outdoor Cellular LTE Router User Guide
- June 1, 2024
- OUTDOOR ROUTER
Table of Contents
OUTDOOR ROUTER EZR34T Outdoor Cellular LTE Router User Guide
EZR34T-LTE QUICK GUIDANCE
EZR34T-LTE SCHNELLLEITUNG
EZR34T.Router.Works/v/LTE
Scan QR code or visit URL link to see the complete edition of the online manual.
WORKING PRINCIPLE
WIE FUNKTIONIERT ES
PACKAGE CONTENTS
PACKUNGSINHALT
Check and count the package contents.
-
Outdoor Router Außen-Router
-
2x 4G and 2x WiFi Omni Antennas Rundum Antennen
-
10-Meter LAN Cable LAN-Kabel 32,8-Fuß
-
PoE Injector PoE-Injektor 52Volt
AC-PLUG FOR UK / EU US / AU -
L-Bracket & T-Wrench Halterung & Schlüssel
-
Mounting Kit
Note: The PoE injector has either UK/EU/US/AU plug according to the
destination.
Please contact us immediately if any components are missing
INTERFACE OVERVIEW
PORTS & SCHNITTSTELLEN
INSTALL ANTENNAS
ANTENNEN INSTALLIEREN
You can install the antennas after finishing the below step 2 or step 3.
The 4G-LTE antennas are marked 4G
and Wi-Fi antennas are engraved **WIFI
**
LOCATE ANTENNA SOCKETS
Locate embossed numbers
1~6 on the top & bottom sides
1 &3 are for 4G antennas
4 & 6 are for WIFI antennas
Put antennas aligned at corresponding sockets, turn the milled part on the antenna head in the clockwise direction to tighten them.
UPGRADEABLE
All of the base sockets are N-female.
Ensure alternative antennas are with N-Male connectors.
INSERT SIM CARD & CONNECT PoE
SIM-KARTE EINLEGEN & PoE ANSCHLIESSEN
Firstly, take off the Cap anti-clockwise from gland.
Push from inside of Barrel to take out the Stopper.
PoE
Take one end of the LAN cable through the Cap.
Put the LAN cable through
Barrel, plug in PoE & LAN port.
Clamp the Stopper on the LAN cable & settle it in the Barrel.
Turn the Cap clockwise to tighten it on Barrel.
Connect another end of LAN cable to the PoE port on the PoE injector
INDICATORS
The SIM indicator is on the top left corner of the router motherboard.
The indicators turn green when a related function is activated.
They flash when having data flow.
FOR NANO-SIM (0.5” x 0.3”)
Ensure it has a strong mobile signal.
The modem sensitivity is -101dBm, approx 2-bar on the phone
SIM CARD
Please turn off the power while inserting or taking out a SIM card.
Locate SIM1-2 slots in top right corner.
Tap the lid, slide left to open the slot.
Put a Nano SIM card in the SIM1 slot.
The gold pins should be face down.
Cover the SIM lid and slide right to lock it.
ETHERNET
Connect a computer to the LAN port on the PoE injector to get the Ethernet.
To use another router, connect its WAN port to the LAN port on the injector
ALTERNATIVE POWER
You can replace PoE injector with an IEEE802.3af/at standard PoE switch and the DC socket takes 9~52Volt power.
BRACKET & MOUNTING
HALTERUNG UND BEFESTIGUNG
SIGNAL COVERAGE
The cellular signal quality is crucial to mobile internet speed and stability. Ensure there is fair signal coverage. The router should install in a suitable location, such as elevated, near a window, and away from obstructions and other RF equipment.
Suggest using a smartphone and walking around to check the signal bars.
To measure the signal quality accurately, please check tutorial at
https://www.outdoorrouter.com/signal/.
INSTALL ON A POLE
Find a pole with Ø35~50mm diameter. The typical installation is on a vertical
pole.
Turn the bracket parallel to the pole when installing the router horizontally.
Use the cross end on T-wrench and M6 cross-head screws to install the
L-shape bracket on the backside of the enclosure.
Firstly, clasp the pole with U-bolts and holders, then attach the L-shape bracket to the holders.
On another side of the bracket, put washers , spring washers, and hex nuts on U-bolts.
Tighten the hex nuts with an M10 spanner
POWER ON ROUTER
Connect the AC plug on the PoE injector to the 110~240 Volt electrical outlet, and the router will boot up automatically.
FIRMWARE CONFIGURATION
FIRMWARE KONFIGURATION
CONNECT BY WIFI OR LAN
After turning on power, use a phone or computer to join the open Wi-Fi hotspot
Outdoor-WiFi-xxxx-V4/5 or connect the computer to the LAN port on the PoE injector.
Open a web browser, enter the router IP http://192.168.30.1 on the address
bar.
Click the Login button to access the admin panel.
- If unable to access the login page, change a web browser and recheck the Wi-Fi or LAN connection.
SET ADMIN PASSWORDS
After accessing the router, navigate to System > System from the top menu.
Under the General Settings tab, click the Sync with browser button to sync
the time.
Go to System > Administration, input new custom router password twice, then click the Save and Apply button to save settings.
- Keep the password in a safe place
SET WIFI HOTSPOTS
Go to Network > Wireless, there are two WiFi hotspots on the wireless overview.
[ ra0 ] MT7615E 802.11bgn —- SSID: Outdoor-WiFi-xxx-V4 [ 2.4 GHz ] [ rax0] MT7615E 802.11anac — SSID: Outdoor-WiFi-xxx-V5 [ 5.8 GHz ]
Click the Disable (Enable) buttons to turn off (on) the WiFi hotspots.
Associated Stations are the active WiFi connections and their working
status.
Click the Edit buttons on each SSID row to enter their configuration pages.
On the General Setup tab, you can monitor the hotspot’s working status.
Suggest using default settings of Mode, Channel, Width, and Transmit Power.
WIFI SSID & PASSWORD
Scroll down to Interface Configuration, and change WiFi SSID on the ESSID field.
Click the tab of Wireless Security, and choose WPA, WPA2, or mixed mode on the Encryption option. Input the WiFi password in the Key field.
Click the Save & Apply button on the bottom right corner. The WiFi hotspot takes 2~3 minutes to reboot. Then re-connect to the new hotspot.
WIFI COVERAGE
For better outdoor WiFi coverage, suggest installing the router in an open space with the fewest barriers nearby.
To cover indoor spaces, you can install the router near the windows or doors.
You can also use an indoor router and link to the LAN port on the PoE
injector.
SETUP LTE-MODEM
The default mobile modem settings can adapt to most operators. You can find the mobile modem Device information on the front page.
If the Mobile interface fails to connect, verify the mobile signal quality and check with the operator if the SIM card is enabled and has data allowance.
MOBILE INTERFACE
Protocol: Mobile Data
Uptime: 12h 12m 12s
RX: 757.03 KB (1782 Pkts.)
TX: 1.66 MB (11551 Pkts.)
SIM: Primary SIM1
IPv4: 10.xx.xx.xx/xx
Go to Network > Interfaces. Check the protocol, uptime, data flow, SIM, and IP.
Click the Edit button to configure the
advanced Mobile parameters.
Protocol; Use the default “Mobile Data” protocol. Switch to QMI or PPP when needed.
- Check the tutorial at https://www.outdoorrouter.com/protocol/
Active SIM: Choose the SIM card slot that inserts a SIM card.
Auto Switch: Enable it when inserting two SIM cards on both SIM1/2 slots.
SIM Card: It switches to another slot when Active SIM Card is offline.
Primary SIM1 / Secondary SIM2
APN: Refer to operator’s instructions to set APN, username, and password.
- Refer to the tutorial at https://www.outdoorrouter.com/apn/
PIN: Leave it blank when using the default SIM card PIN code.
Authentication: Usually use PAP or PAP/CHAP authentication.
IP Type: Please choose IPv4 only or both IPv4/IPv6.
LAN NETWORK
Turn on DHCP mode on the phone or computer to obtain a local IP address from the router. To use a static IP address, please comply with the below format.
Computer IP: 192.168.30.100~249 ( pick one IP from 100~249 )
Subnet mask: 255.255.255.0 ( 24 on Windows )
Gateway: 192.168.30.1
RECOVERY
RECOVERY
Rebooting the router could solve glitches after a long period of work.
Go to System > Reboot or replug the PoE injector to reboot it.
Soft Reset
If the router works unstable after changing settings, go to System >
Backup / Flash Firmware. Click the Perform Reset button to reset it.
Hard Reset
To run a hard reset, tap and hold the Reset button for 5 seconds when the
router is powered on. Release it and wait 5 minutes until boots up.
IMPORTANT!
DO NOT TURN OFF POWER WHILE RESETTING THE ROUTER!
Thanks for reading! If you have questions while using the router, please check
the online manual at EZR34T.Router.Works/v/LTE
Please feel free to contact us if you need any further assistance.
OutdoorRouter
www.outdoorrouter.com
Feel free to contact us if you need any further assistance.
Bei fragen wenden sie sich bitte an nus.
CALL US
United Kingdom +44 020 3575 1156
United States +1 323 521 4621
Australia +61 02 8205 3116
E-MAIL [email protected]
References
- Outdoor Router 4G 5G Modem SIM Card Slot External Antenna
- APN Settings for Outdoor 4G Router - Outdoor Router
- 4G Mobile Interface Protocols - QMI and PPP - Outdoor Router
- Field Test 4G Mobile Signal Strength - Outdoor Router