HandStands BESTBUDS 06 Wireless Earbuds Instructions
- June 5, 2024
- HandStands
Table of Contents
HandStands BEST BUDS 06 Wireless Earbuds
Instruction Front
-
Install Ear Tip:
Choose among the two sizes of ear tips and insert on earbud -
Power On/Of:
Earbuds will automatically turn on when removed from the case. If Power isn’t on, press top of left earbud until “power on’ is heard Power off, press left earbud until “power off” is heard -
To Pair Earbuds:
Connect to:
Open docking case, take out buds, left&right earbuds will pair automatically. Once Best Buds Connection is heard, your earbuds ae Connected, For all future connections with this device, your Best Bud ear buds should connect automatically once removed from the charging case, -
For all devices
Wait until Bluetoth 5.0 have paired; then search for Bluetooth 5.0 in Bluetooth devices, select Bluetooth 5.0 and wait for earbuds to connect. Once Bluetooth 5.0 Connection is heard your ear buds are conected. For all future connections With this device, your Bluetooth 5.0 ear buds should connect automatically once removed from the charging case. -
To Charge earbuds:
Place in charging case. The indicator light with either be red showing that it is charging or blue indicating that it is fully charged and then fade away. -
Charge Best Bud Case:
Remove blue protective cover on back base of earbuds to charge earbuds. Connect USB port to power source and the micro adapter to the charging case. The indicator light will ither flasth red, indicating it is charging or blue indicating the case is fully charged. Ready for your earbuds.
Instruction Back
- Answer Call: Press the left main control button once
- Dismiss Gall: Press the left main control button once
- Pause: Tap left or right earbud one time
- Turn Volume up: Tap the left earbud three times
- Turn Volume downs: Tap the right earbud three times
- Prior song: Tapthe right earbud two times
- Next song: Tap the left earbud two times
FCG Rules
This device complies with part 15 of the FCG Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes Or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCG Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions may cause harmful
interference to radio communications, However, there is no quarantee that
interference will not occur in an installtion. lf this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be USed in portable exposure condition without restriction,