Cherish M1B20 Wireless Charger For Mobile Device User Manual
- June 6, 2024
- Cherish
Table of Contents
Smart Life Creator
Thank You For Purchasing MONOLAB
How to Use
Use a USB-C adapter to supply power to MONOLAB charger.
MONOLAB 1 Year Limited Warranty
MONOLAB warrants the included hardware product against defects in materials and workmanship for one year from the date of original purchase. MONOLAB does not warrant against normal wear and tear, nor damage caused by accident or abuse. To obtain service,contact the retailer. If you submit a valid claim under this warranty, MONOLAB will either repair, replace, or refund your hardware product at its own discretion. You maybe required to furnish proof of purchase details when making a claim under this warranty.
Warning
Failure to follow these safety instructions could result in fire, electric
shock, personal injury, or damage to the product or other property.
Please read all of the following safety information before using your MONOLAB
charger.
Power
Use a FCC certified power adapter to supply power to the MONOLAB charger. Use of an adapter other than that may result in death or injury.
Moisture Exposure
Do not use the MONOLAB charger or the USB-C power adapter in wet locations, such as near a sink, bathtub, or shower stall, and do not connect or disconnect them with wet hands. Disconnect the MONOLAB charger, its cable, and the power adapter if any of the following conditions exists: the power cord or plug becomes frayed or otherwise damaged; the charger or its cable, or the power adapter is exposed to rain, excessive moisture, or liquid; dropped; damaged.
Prolonged Heat Exposure
MONOLAB charger and its cable are designed and manufactured according to FCC
certification standards. However, sustained contact on warm surfaces for long
periods of time may cause discomfort or injury. Use common sense to avoid
situations where your skin is in contact with the MONOLAB charger, the power
adapter, or devices on the charger when it is operating or connected to a
power source for long periods of time. For example, do not sleep on the
MONOLAB charger, the power adapter, or devices on the MONOLAB charger, or
place them under blanket, pillow, or your body, when it is connected to a
power source. It is important to keep the MONOLAB charger and the power
adapter in a well—ventilated area when in use or charging. Take special care
if you have a physical condition that affects your ability to detect heat
against body.
Metallic objects (such as keys, coins, batteries, or jewelry) can become warm
enough to interfere with charging or cause discomfort or injury when
contacting the body. Therefore,when using the MONOLAB charger, please be
careful not to place metal objects on the charger. It can also damage the RFID
tag.Theref ore, do not place anything with an RFID tag on top of the MONOLAB
charger, such as contactless credit cards, passports, or access cards.
Repairing
Do not disassemble the MONOLAB charger may damage it or injur to you. If the MONOLAB Charger is damaged or malfunctions, discontinue use and contact MONOLAB for service.
Exposure to Radio Frequency Energy
The radiated output power of the MONOLAB charger meets the radio frequency exposure limits of FCC certification. The MONOLAB charger should be operated with a minimum separation distance of 20cm (8 Inches) between the MONOLAB charger, or any devices on the MONOLAB charger, and a person’s body.
Medical Device interference
MONOLAB chargers contain magnets and radio that emit from electromagnetic
fields. These electromagnetic field may interfere your medical devices, such
as pacemakers and defibrillators. Consult your physician and medical device
manufacturer for information specific to your medical device and whether you
need to maintain a safe distance of separation between your medical device and
the MONOLAB charger.
If you suspect the MONOLAB charger is interfering with your medical device,
stop using the MONOLAB charger.
Product Specification
Input voltage/current: 12V/1 .5A, 9V/1.6A,9V/1.45A 5V/1.35A
Operating temperature: 0-35 degrees
Limitation of Liability
MONOLAB is not to be held responsible for indirect or direct damage due to
damages in use, loss of profits, loss of actual or anticipated profits
(including contractual profits), loss of anticipated saving, business damage,
credit damage, reputation damage, damages caused by natural catastrophes or
consequential costs, and so on.
None of MONOLAB reseller, agent or employee is authorized to change, extend or
add to this warranty.
Designed by Monolab, S.Korea
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference recei ved,
including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>