FiiO K19 Desktop Decoding Headphone Power Amplifier User Guide
- June 1, 2024
- Fiio
Table of Contents
FiiO K19 Desktop Decoding Headphone Power Amplifier
Buttons and Ports Labeled
*Pictures are for reference only. The actual product may vary.
XLR balanced headphone out- USB port
- Bluetooth antenna
- 12Vtrigger out
- ID Coaxial in
- Single-ended line-out
- AC power in|
- 6.35mm headphone out
- Menu knob with button
- HDMlin
- Ground switch
- Optical in
- Balanced line-out
- AC power switch
- 4.4mm balanced headphone out
- Knob indicator light
- HDMI out/ARC
- RS232 port
- Coaxial out
- AC/DC power toggle switch
- Display
- Volume knob with button
- 12Vtriggerin
- USB port
- Optical out
- DC pow,
‘Note: If the two USB ports on the front and rear panels are connected,
the front one will prevail, and the rear one will be disabled, ‘Menu knob with
button: Rotate to switch working mode/menu, short press to confirm, and hold
to return to previous page.
‘Volume knob with button: Rotate to adjust volume, short press to power on/tum
off screen/wake up screen, and hold to power off, ‘RS232 port: Connect to
computer for OSP equaliser adjustment.
Operation Explained
-
Power Supply
The Kl9 supports AC and DC power supplies. AC power supply prevails as default a t its first startup and the AC power switch is defaulted to be ON, so the Kl9 can be used after connecting to a power cable. When connecting to a DC power supply, please toggle the AC/DC toggle switch to the DC position, and ensure the output voltage is 15V and output current -
Volume Knob
After being connected to a power supply and Kl9 power on, short press the volume knob to turn off/wake up the screen. Hold the volume knob to tum the Kl9 off, when it is off, press the knob to turn it on. When it is on, rotate the volume knob to adjust the volume. -
Menu Knob
-
Working mode switching: On the homepage, rotate the menu knob to enter the working mode menu, and keep rotating to successively switch between USB/COAXIAL/OPTICAL/HDMI/HDMI ARC/BLUETOOTH modes. Choosing the targeted mode and short pressing the knob for confirmation, it will switch to the corresponding mode and return to the homepage.
On the working mode switching page, hold the menu knob to return to the homepage. -
Menu setting: On the homepage, hold the menu knob to call up the settings menu, rotate it to switch between different settings, and short press it for confirmation. On the settings menu, hold the menu knob for about 2s or select and press the “Return icon” to return to the previous page.
-
Working Modes
The Kl9 has 6 working modes.
-
USB: USB decoding, connect to mobile phones or computers. If the two USB ports on the front and rear panels are connected, the front one will prevail, and the rear one will be disabled. When connecting to a mobile phone, the K19 will not consume its power.
(Note: You would need to install the USB DAC driver when connecting the Kl9 to a Windows computer for USB decoding. Please download the USB DAC driver on our website https://www.fiio.com/Driver_Download and follow relevant instructions to install it For macOS systems, it runs driver-free.) -
COAXIAL: Coaxial decoding, connect to devices with a coaxial output.
-
OPTICAL: Optical decoding, connect to devices with an optical output.
-
HDMI: HDMI IN, connect to devices with an HDMI digital audio output. If the HDMI contains video signals, the Kl9 will output these signals through its ARC port to a monitor or other devices.
(Note: The HDMI of the Kl9 only supports PCM decoding, but not multichannel audio and video decoding.) -
HDMI ARC: Connect the ARC port of the K19 to a device that supports ARC output, and audio signals can be passed back to the Kl9 for output.
-
BLUETOOTH: Bluetooth decoding, connect to devices that support Bluetooth output. When switched to the Bluetooth receiving mode for the first time, the Kl9 will automatically enter the pairing state. At. this time, the screen of the Kl9 will display “Pairing In later uses when entering the Bluetooth receiving mode, the K19 will automatically reconnect to the last-connected device.
-
(Note: The Bluetooth mode of the Kl9 only supports audio playback, but not voice calls.)
DSP Equalizer Introduction
All working modes of the Kl9 support DSP equalizer, which can be adjusted
through the connected computer or mobile phone. When using the DSP equalizer
on a computer, please use a USB cable to connect the Kl9 through its RS232
port to the computer, and download the DSP equalizer software at
http://www.fiio.com/Driver_Download. When using the DSP equalizer on a
mobile phone, please scan the QR code of the FIIO Control app and download the
corresponding app to use it.
(Note: The DSP equalizer of the Kl9 is only available for headphone and line
outputs, but not optical and coaxial outputs.)
12V Trigger Port Introduction
If two devices both featuring a trigger port are connected, they can
synchronously power on and off. Use a 3.5mm audio cable to connect the Kl9
with the device through their trigger ports. When connected through the Kl9’s
Trigger IN port, the Kl9 can be controlled by the connected device for
powering on and off; when connected through the Kl9’s Trigger OUT port, the
Kl9 can control the connected device for powering on and off.
(Note: The voltage of the Kl9’s trigger ports is 12V. Please ensure the
voltage of the connected device conforms to it.)
How to Install the Base Support
Remove the protective films from the screw positions on the bottom of the Kl9. As shown in the figure, fix the screws to the appropriate screw position to secure the base support, and then use a screwdriver to lock the screws.
Notes and Precautions
- In case of system errors, please try to either turn the Kl9 off and on, or unplug and replug the power cable to restore it to a normal state.
- Please adjust the volume (adjustable volume at line out) to a suitable level before wearing headphones so as to protect your hearing.
- Please do not wear headphones when plugging in or unplugging the headphones in case there may be a sudden impulse noise damaging your hearing.
- Please use this device under an appropriate input voltage.
- The device should be connected to the power outlet with grounding protection.
- Please do not insert headphones into the TRIGGER port. Otherwise, they may be damaged.
- There are high-voltage risks inside the device. Please do not repair or disassemble the product on your own and please keep it away from water.
List of Items Included in the Package (Please check if all the items are included)
- Kl9
- Headphonestand
- Quick start guide
- AC power cable
- Base support
- Warranty card
- USB data cable
- Base screws
- Headphone jack adapter
- Screwdriver
To Learn More
-
For related video instructions of the K19 and FAQ {Frequently Asked Questions), please scan the QR code below.
-
The Kl9 can be controlled by the FIIO Control App. Please scan the QR code below to download it.
-
To learn more about the product, please visit our website: www.fiio.com
-
Due to continuous improvement, every specification and design is subject to change at any time without further notice.
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to an inapplicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International Ltd., registered in the United States and other countries.
Hereby, Guangzhou FIIO Electronics Technology Co., Ltd declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at: www.fiio.com/doc
Master Quality Authenticated
The Kl9 includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The Kl9 Now Playing screen shows green or blue dot next to MQA logo to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It shows blue dot to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The equipment should be installed and operated with
minimum distance 20 cm between the radiator &your body. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate
the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>