HandStands 2AMZY2BUDS Promo LLC Wireless Earbuds Instruction Manual
- June 5, 2024
- HandStands
Table of Contents
Instruction Front
FCC ID: 2AMZY2BUDS
Power On/Off:
Earbuds will automatically turn on when removed from the case. If Power isn’t on, press the top of the left earbud until “power on” is heard To Power off, press the left earbud until “power off” is heard
To Pair Earbuds
: Earbuds will pair to each other when turned on & taken out of the case
To connect to device: Bluetooth 5.0 will seamlessly connect to most 103
devices. When earbuds are recognized by the device simply accept the
Bluetooth-connected earbuds.
For Android and other devices: Wait until Bluetooth 5.0 have paired; then
search for Bluetooth 5.0 in Bluetooth devices, select Bluetooth 5.0 and wait
for earbuds to connect. Once Bluetooth 5.0 Connection is heard, your earbuds
are connected. For all future connections with this device, your Bluetooth 5.0
earbuds should connect automatically once removed from the charging case.
To Charge earbuds:
Place in charging case. The indicator light with either be red showing that it
is charging or blue indicating that it is fully charged and then fades away.
Charge 2 BUDS Case:
Connect USB port to a power source and the micro adapter to the charging case.
The indicator light will either flash red, indicating it is charging or blue
indicating the case is fully charged. Ready for your earbuds.
Instruction Back
Answer Call: Press the left main control button once
Dismiss Call: Press the left main control button once
Pause: Tap left or right earbud one time
Turn Volume up: Tap the right earbud two times
Turn Volume downs: Tap the left earbud two times
Prior song: Tap the right earbud three times
Next song: Tap the left earbud three times
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>