hansgrohe 73001XXX Tecturis Single Lever Basin Mixer Instruction Manual
- June 17, 2024
- hansgrohe
Table of Contents
- hansgrohe 73001XXX Tecturis Single Lever Basin Mixer
- Product Information
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol Description
- Adjustment
- Dimensions
- Assembly
- Flow diagram
- Spare parts
- Cleaning
- Operation
- Test certificate
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 73001XXX Tecturis Single Lever Basin Mixer
Product Information
Specifications
- Model: Tecturis E 80 CoolStart 73001XXX
- Model: Tecturis E 110 73011XXX
- Model: Tecturis E 110 CoolStart 73012XXX 73016XXX
- Model: Tecturis E 73200XXX
- Model: Tecturis E 80 CoolStart 73002XXX 73004XXX
- Model: Tecturis E 110 73010XXX
- Model: Tecturis E 110 CoolStart 73014XXX 73018XXX
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic, and body cleaning purposes.
- The hot and cold supplies must be of equal pressure.
Installation Instructions
Technical Data
- This mixer is produced with EcoSmart (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0.1 – 0.5 MPa
- Test pressure: 1.6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: Thermal disinfection
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination
with a continuous-flow water heater is not recommended.
FAQ
-
Q: Can I use silicone-containing acetic acid with this product?
A: No, it is not recommended to use silicone containing acetic acid with this product. -
Q: What are the available colors for this product?
A: The available colors are Chrome Plated, Brushed Bronze, Matt Black, and Matt White. -
Q: Are there any special accessories available for this product?
A: Yes, there are special accessories available. Please order them separately as an extra. -
Q: Is there a test certificate available for this product?
A: Yes, there is a test certificate available. Please refer to page 44 for more information.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic and body cleaning purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart (flow limiter) located behind the aerator can be removed.
Technical Data
DataThis mixer series-produced with EcoSmart (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol Description
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.
Dimensions
Assembly
Flow diagram
Spare parts
- XXX = Colors
- 000 = Chrome Plated
- 140 = Brushed Bronze
- 670 = Matt Black
- 700 = Matt White
Special accessories (order as an extra)
- special tool #58085000
- Installation putty
Cleaning
www.hansgrohe.com/cleaning-recommendation
Operation
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>