Taylor 1732 Digital Hygrometer Thermometer Instruction Manual
- June 1, 2024
- TAYLOR
Table of Contents
Taylor 1732 Digital Hygrometer Thermometer
Simple, reliable, and accurate…the weather station allows you to monitor indoor conditions and provides an indoor comfort level reading.
NOTE: Some units have a static cling label over the digital display. Please remove it before use.
BATTERY INFORMATION
- The weather station is powered by 2 AAA batteries (not included). Remove the battery compartment cover located on the back of the unit. Install 2 AAA batteries according to the polarity markings. Replace the battery compartment cover.
- Replace the batteries if readings grow dim or irregular. Always replace both batteries at the same time; do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in a fire. Batteries may explode or leak. Remove the batteries if the unit will not be used for a long period of time.
PRODUCT DIMENSIONS
WEATHER STATION
DISPLAYING YOUR WEATHER STATION
- Place the unit indoors in a well-ventilated location away from direct sunlight.
- Pull out the Table Stand on the back of the unit to stand upright on a flat surface.
HOW TO READ YOUR WEATHER STATION
- The weather station displays the current indoor temperature and humidity. It also combines temperature and humidity readings to offer a gauge of the indoor comfort level.
- Indoor temperature readings – these are temperatures at the weather station location. The temperature display is located in the bottom left of the LCD screen.
- Indoor humidity readings – these are the relative humidity readings at the weather station location. The humidity display is located in the bottom right of the LCD screen.
- The unit will update temperature, humidity, and comfort level readings approximately every 20 seconds. Press the “°C/°F” button on the back of the weather station to switch between Fahrenheit or Celsius temperature displays.
Notes: If the temperature is higher than the range of the unit, the temperature display will show “HH.H” and the humidity display will show “_”. If the temperature is lower, the temperature display will show “LL.L” and the humidity display will show “-“. If the humidity is higher than the range of the unit, the display will show “HH”. If the humidity is lower, the display will show “LL”.
CLOCK SETTING
The clock display is located in the center of the LCD screen.
- Press and hold the “SET” button on the back of the weather station for 2 seconds to enter Clock Setting Mode. “12 Hr” or “24 Hr” flashes.
- Press the “+” button on the back of the weather station to toggle between 12 or 24-hour clock mode. Press “SET” to confirm. The hour digits flash.
- Press the “+” button to change the hours. Press “SET” to confirm. The minute digits flash.
- Press the “+” button to change the minutes. Press “SET” to confirm. The clock is set.
Notes: If no buttons are pressed within one minute, the unit will automatically exit Clock Setting mode. The digits can only advance. If you pass the number you want, continue to press “+” to cycle through the numbers again. Press and hold down the “+” button to advance the digits quickly.
MAXIMUM/MINIMUM TEMPERATURE READINGS
The weather station will store the last recorded high and low temperatures over a 24 hour period. The 24-hour period starts when the unit is powered up.
- Press the “ ” button on the front of the unit once to display the highest (maximum) temperature and humidity readings of the day at that unit’s location. “MAX” will show on the LCD.
- Press the “ ” button a second time to display the lowest (minimum) temperature and humidity readings of the day at that location. “MIN” will show on the LCD.
- Press the “ ” button a third time to return to the current temperature and humidity readings at that location, or the display will automatically return to current readings after 5 seconds.
To clear the maximum and minimum readings: In MAX or MIN mode, press and hold the “ ” button for 2 seconds to clear that memory. The temperature and humidity displays show dashes (“–“) and the unit will begin to track new MAX and MIN readings. All memories will also reset when the unit’s batteries are removed.
COMFORT LEVEL
The effects of indoor temperature and humidity are combined to determine an Indoor Comfort level, which appears as a gauge at the top of the LCD screen. The level is rated between DRY, COMFORT, and WET. The color gauge is an easy way to visually assess the room’s current condition, spanning from red for dry, green for ideal, and purple for wet.
- DRY: Contains inadequate moisture
- COMFORT: Comfortable level, ideal range for both temperature & humidity
- WET: Contains excess moisture
PRECAUTIONS
- The unit is intended for indoor use only. It is not sealed against moisture and could be damaged if used outdoors.
- Do not immerse the unit in water. If you spill liquid on it, dry it immediately with a soft, lint-free cloth.
- Do not clean the unit with abrasive or corrosive materials. This may scratch plastic parts and corrode electronic circuits.
- Do not subject the unit to excessive force, shock, dust, temperature, or humidity. This may result in malfunction, shorter electronic life span, damaged batteries, or distorted parts.
- Do not tamper with the unit’s internal components. Doing so will invalidate the warranty on this product and may cause damage. Other than replacing the batteries, the unit contains no user-serviceable parts.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries. Do not dispose of batteries in a fire. Batteries may explode or leak. Remove the batteries if the unit will not be used for a long period of time.
- This product is for measuring room temperatures only. DO NOT PLACE THE UNIT INTO OVENS, GRILLS, FREEZERS, or MICROWAVE OVENS.
- Always read the instruction manual before operating this product.
- If the temperature is higher than the range of the unit, the temperature display will show “HH.H” and the hygrometer display will show “-“. If the temperature is lower, the temperature display will show “LL.L” and the hygrometer display will show “…”. If the humidity is higher than the range of the unit, the display will show “HH”. If the humidity is lower, the display will show “LL”.
- Indoor temperature range is 14°F to 122°F (-10°C to 50°C).
- Indoor humidity range is 20% to 90% RH.
SPECIFICATIONS
- Indoor temperature range: 14°F to 122°F (-10°C to 50°C)
- Indoor humidity range: 20-90% RH
- Over/Under range messages: “HH.H/LL.L” and “-” for temperature, “HH/LL” for humidity
- Resolution: 0.1 degrees for temperature and 1% for humidity Indoor temperature and humidity readings update approximately every 20 seconds Minimum/Maximum temperature and humidity records
- Comfort level display:
- DRY – relative humidity is lower than 34%
- COMFORTABLE/DRY – relative humidity is between 35% and 40%
- COMFORTABLE/IDEAL – relative humidity is between 41% and 55%
- COMFORTABLE/WET – relative humidity is between 56% and 64%
- WET – relative humidity is higher than 65% 12/24 hour clock
- Power: 2 AAA batteries (not included)
NOTE: This Class B digital apparatus complies with Canadian ICES-003. Operations are subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
One-Year Limited Warranty
This product is warranted against defects in materials or workmanship (excluding batteries and adapters) for one (1) year from the date of original purchase for the original purchaser. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our option) while under warranty, do not return it to the retailer. Please return the item to:
- Lifetime Brands Canada 5151 Thimens Boul., Montreal, Quebec, H4R 2C8
Questions about your weather station?
Manufactured For:
LIFETIME BRANDS CANADA 5151 Thimens Boul., Montreal, Quebec H4R 2C8
The trademarks ®/™ and logos appearing herein are the property of Lifetime Brands, Inc., and/or their respective owners.
© 2019 Taylor, a Division of Lifetime Brands Inc. All rights reserved. Due to continuous product improvements, the picture on the carton may differ slightly from the actual product. Made to our exact specifications in China. Not legal for trade.
MADE IN CHINA
FREQUENTLY ASKED QUESTIONS
What are the primary functions of the Taylor 1732 Digital Hygrometer Thermometer?
The Taylor 1732 Digital Hygrometer Thermometer is designed to measure both humidity and temperature, providing users with essential environmental data.
What are the dimensions of the Taylor 1732 Digital Hygrometer Thermometer?
The Taylor 1732 Digital Hygrometer Thermometer measures 3.06 x 0.88 x 2.38 inches, ensuring a compact and space-saving design.
How does one mount or place the Taylor 1732 Digital Hygrometer Thermometer?
The Taylor 1732 Digital Hygrometer Thermometer is designed for tabletop use, offering convenient placement options for various settings.
Who is the manufacturer of the Taylor 1732 Digital Hygrometer Thermometer?
The Taylor 1732 Digital Hygrometer Thermometer is manufactured by Lifetime Brands Inc., ensuring quality and reliability.
What is the price of the Taylor 1732 Digital Hygrometer Thermometer?
The Taylor 1732 Digital Hygrometer Thermometer is priced at $9.99, offering an affordable solution for monitoring humidity and temperature levels.
How does the weight of the Taylor 1732 Digital Hygrometer Thermometer contribute to its usability?
Weighing only 2.4 ounces, the Taylor 1732 Digital Hygrometer Thermometer is lightweight and portable, making it easy to move and install in different locations as needed.
Does the Taylor 1732 Digital Hygrometer Thermometer come with any warranty coverage?
The Taylor 1732 Digital Hygrometer Thermometer is backed by a one-year warranty, providing assurance of its quality and durability.
How does the weight of the Taylor 1732 Digital Hygrometer Thermometer contribute to its usability?
Weighing only 2.4 ounces, the Taylor 1732 Digital Hygrometer Thermometer is lightweight and portable, making it easy to move and install in different locations as needed.
Why is my Taylor 1732 Digital Hygrometer Thermometer displaying inaccurate humidity readings?
Inaccurate humidity readings on the Taylor 1732 Digital Hygrometer Thermometer may be due to sensor calibration issues or exposure to extreme environmental conditions. Try recalibrating the device according to the manufacturer's instructions or relocate it to a more stable environment away from direct sunlight or sources of moisture.
What should I do if the temperature reading on my Taylor 1732 Digital Hygrometer Thermometer seems incorrect?
If the temperature reading appears incorrect, ensure that the device is placed in a location with stable temperatures and away from heat sources or drafts that could affect its accuracy.
How can I troubleshoot connectivity issues with my Taylor 1732 Digital Hygrometer Thermometer?
If your Taylor 1732 Digital Hygrometer Thermometer is not displaying data or is experiencing connectivity issues, check the battery compartment to ensure that the batteries are properly inserted and functioning.
What should I do if the display on my Taylor 1732 Digital Hygrometer Thermometer is blank?
If the display is blank, first check the batteries to ensure they are not depleted. If the batteries are fine, try resetting the device by removing the batteries for a few minutes and then reinserting them.
How can I troubleshoot inconsistent readings on my Taylor 1732 Digital Hygrometer Thermometer?
Inconsistent readings may be caused by interference from nearby electronic devices or improper placement of the thermometer.
What should I do if my Taylor 1732 Digital Hygrometer Thermometer is not responding to button presses?
If the buttons on the thermometer are not responding, check the battery compartment to ensure that the batteries are properly installed and have sufficient charge. If the issue persists, try resetting the device or replacing the batteries.
How can I troubleshoot condensation or moisture buildup inside the display of my Taylor 1732 Digital Hygrometer Thermometer?
Condensation or moisture buildup inside the display can occur if the device is exposed to high humidity levels or rapid temperature changes. To resolve this issue, move the thermometer to a drier location and allow it to acclimate to the new environment.
DOWNLOAD THE PDF LINK:Taylor 1732 Digital Hygrometer Thermometer Instruction Manual
REFERENCE:Taylor 1732 Digital Hygrometer Thermometer Instruction Manual- Device.Report