INUHEAT PP3 PowerPack Magnetic Charger Adapter User Guide
- June 4, 2024
- INUHEAT
Table of Contents
INUHEAT PP3 PowerPack Magnetic Charger Adapter
QUICK START GUIDE
Charging your Inuheat® PowerPacks
Please fully charge your Inuheat® PowerPack set before first use.
Connect a USB charger to the Charger Adapter with the included USB-A to USB-C
cable or an other USB-C to
USB-C cable. Attach the PowerPacks to the magnetic Charger Adapter.
Attaching and detaching the Inuheat® PowerPacks
Attach the Inuheat® PowerPack onto the magnetic connector on the holder on your garment. If available on your garment, close the pocket or fold the cuff over the Inuheat® PowerPack for secured attachment.
Using your Inuheat® PowerPacks
- To turn ON the Inuheat® PowerPack – press the button once
- To turn OFF – press and hold the button for 3 seconds
- Heat levels are also adjusted with the push button. The heating levels are set in a
“loop” pattern. The sequence of each push of the button is as such: (0) Standby, (1) Low, (2) Medium, (3) High.
Turn off – Press and hold button for three seconds
Unlock all features Download the Inuheat® App
Download the Inuheat® app for remote control from your phone and get additional functionality. A more detailed manual is available in the smartphone app menu and at inuheat.com/support
Time Guarantee
- Set the heating level in the phone app´ and your system guarantees that the heat will last as long as the time promised..
Heat Boost
- Provides a 5-minute burst of extra high heat when you need to warm up fast.
Vibrate On Call
- Don’t miss important phone calls from your family or friends. Vibrate On Call makes your PowerPacks vibrate when your phone rings.
SAFETY INSTRUCTIONS
-
Please read the entire operating instructions carefully before using the Product.
-
The PowerPack, Charger Adapter, USB Cable and Inuheat Heat-Ready garments (the Products) are not toys.
These Products are not suitable for children. If adults with reduced physical, sen sory or mental ability do use the Products, they should do so only under strict adult supervision and after being instructed on the safe operation of the Products. -
The Products should not be used by any persons with impaired skin sensitivity. Persons that cannot properly feel or react to heat and cold (e.g., individuals with diabetes, individuals with special needs, etc.) should not use the Products without the approval of a qualified physician.
-
It is recommended to set the Products’ heating level such that you do not actually feel the heating effect after the first few minutes of wear. The goal of your heated Product is to replace the heat lost through your clothing system, not to build up extra heat which can lead to sweating, and can, in extreme situations, lead to burns. As such, it is recommended to run your heating system at the lowest comfortable heat setting for safest operation, highest comfort and longest battery life.
-
Check your skin routinely during and after Product use to confirm there are no signs of irritation or burning.
-
Do not allow conductive materials to touch the heating yarns in heated sock Products.
-
Only use the Products when on a person’s body (e.g., socks on feet, gloves on a hands).
-
The charger adapter is designed for indoor use only and must not be exposed to humidity.
-
Check your Products regularly for signs of wear and tear or system anomalies. If you suspect a problem, contact Inuheat’s Customer Service Team for troubleshooting guidance: www.inuheat.com/support.
-
Damaged PowerPacks, Charger Adapters or USB cables must be retired from service and properly disposed of immediately. Never attempt to modify or repair the components in the heat system or your heated apparel.
-
Keep the PowerPacks away from fire and extremely high temperatures.
-
The Products are not certified for use in medical applications.
-
Do not use Inuheat heated products around avalanche beacons. Electrically heated products and their electronics can severely interfere with the performance of avalanche beacons, negatively impacting your ability to conduct a search and/or to be located.
-
Do not use Inuheat heated products near pacemakers.
-
Inuheat is not responsible for any consequences—direct, indirect, and/or accidental—or any other type of damage or inconvenience arising or resulting from the use of its products. You are responsible for your actions and activities, and for any consequence that may arise or result from them.
FCC Compliance Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with the FCC RF exposure limits and
has been evaluated in compliance with portable exposure condition. There is no
limitation as to which distance can be used from the human body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Compliance Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with the ISED RF exposure limits and has been evaluated
in compliance with portable exposure condition.
There is no limitation as to which distance can be used from the human body.
This Class B digital apparatus complies with Canadian ICES-003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>