PYLE PFA540BT Compact 5.1-Channel Bluetooth Amplifier User Manual

PYLE PFA540BT Compact 5.1-Channel Bluetooth Amplifier

IMPORTANT SAFETY INFORMATION

The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below.Refer to themwhenever you call upon your PyleUSA regarding this product.

FOR CUSTOMERS

CAUTION

You are cautioned that changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture .
• To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains and etc. Do not place lighted candles on the apparatus.
• To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus.
• Do not install the appliance in a confined space, such as a bookcase or built-in cabinet
• Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble
• Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire

Note to Soundbar Installer:
This reminder is provided to call Sound bar installers’ attention to Article 820-40of the NEC that provides guidelines for proper grounding, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as possible.

INSTALLATION

Front Panel Function

1. LED Display Window
2. Volume Control Knob
3. Stand By Adjustment Knob
4. Tuner Adjustment Knob
5.  Virtual Surround Adjustment Knob
6. Mute Adjustment Knob
7. Input Adjustment Knob

REAR PANEL CONNECTION

USING THE REMOTE CONTROL

Remote Control System

1. SLEEP MODE SELECTOR
2.  INPUT MODE SELECTOR
3.  BASS VOLUME ADJUST SELECTOR
4. TUNER CONTROL AREA
5. BLUETOOTH CONTROL AREA SELECTOR
6. MUTE CONTROL SELECTOR
7.  TREBLE VOLUME ADJUST SELECTOR
8. SUBWOOFER VOLUME ADJUST SELECTOR (FOR ACTICE SUBWOOFER)
9.  VIRTUAL SURROUND CONTROL SELECTOR
10. SURROUND VOLUME ADJUST SELECTOR
11. FRONT VOLUME ADJUST SELECTOR
12. CENTER VOLUME ADJUST SELECTOR

BATTERY INSTALLATION

Since the remote control will be used for many units to control operations, you should begin by installing the supplied battery:

1.  Turn the remote control over and pull out the battery compartment cover.
2. Insert the battery according to the battery compartment.
3.  Close the battery compartment cover.
4. Test the unit by pressing Mute or any mode key. If the battery is inserted correctly, the system will response to the instruction

Note

• Do not leave the remote control in an extremely hot or humid place.
• Do not expose the remote sensor to direct sunlight or lighting apparatus that may cause malfunction .
• If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
• If you find that the remote control can’t be used at a normal distance to the main unit, then the battery could be weak, so you need to replace the battery with a new one.
• If battery leaks, remove it immediately, and properly displace it. Avoid touching the leaked material and splashing it to clothing, etc. Clean the battery compartment thoroughly before installing new battery

BASIC OPERATION

Power Up the System

First please connect the AC adaptor to the unit.
Then press ” ” key or press the standby button on the front panel, the system will work normally.

Select Sleep Mode
Sleep mode allows you to make the system sleep at a selected time.

1. Press” “ key or press the standby button on the front panel to select sleep mode.
2. Wake up the system by pressing the same key when the system in sleep mode.

Master Volume Control
Press the” “ key on the front panel to adjust the main channel volume.

How to Adjust Treble
Press the “ “ to adjust the treble volume.

How to Adjust Bass
Press the “ “ to adjust the bass volume.

How to Adjust Subwoofer
Press the “  “ to adjust the bass volume.

How to Adjust Front

Press the “ “ to adjust the front volume.

How to Adjust Cente r

Press the “ “ to adjust the center volume.

How to Adjust Surround

Press the “ “ to adjust the surround volume.

How to Play Bluetooth

Select Bluetooth on remote control

• PaIR up your Bluetooth device with audio

• Bluetooth play and pause

•  Bluetooth skip track

**How to Play Tuner

**

1. Select FM Input Mode
   Press the “ “ key to choose the FM input mode. The LED will display the last turner frequency, for example: 87.5.

2. Listen to the Preset Program
   Press the number keys” “ to select the radio program that you already saved. Once selected, screen will display the radio program’s frequency in the memory area.

3. Select Program
   Press the” “ key to adjust the band of tuner. Press the key for 2 seconds, the FM will search automatically. Then you can press the” “ key once to stop the function.

4. Memory Program
   When you receive a clear radio program and want to save the channel, press one of the “ “ 10 number key for 2 seconds to assign that number key to that channel.

How to Mute
Press “ “ key to turn the sound off/on. Press again to restore the audio to the original level.

HOW TO ADJUST THE SURROUND

Press the  SURROUND to control quantity of speaker

| |
---|---|---
| 1.Press the,display ”ON”: analogy five channel signal| 1. Press the ,display ”ON”: analogy five channel signal
2.Press the display”OFF”: 2.1CH output| 2.Press the             ,display”OFF”: 2.1CH output
| | |
1. Press the         , display”ON”: analogy five channel signal| 1. Press the , display ”ON”: analogy five channel signal| It does not exist.
2.Press the         ,display”OFF”: Real five channel signal| 2.Press the ,display”OFF”: 2.1CH output|

In order to get real 5.1 ch output, please note:

• Get real 5.1ch output only in HDMI mode.
• Audio source must be real 5.1ch to get 5.1ch signal.
• Set up DVD player to 5.1ch audio output.

HOW TO PAIR BLUETOOTH RECEIVER

The system has built in bluetooth receiver.

If you are pairing the bluetooth from a mobile phone for the first time, Open the system and press the “ ” key on the remote and the LED will show “pair”. Then search for the by your own bluetooth sender(mobile phone). If the system have been paired already with the bluetooth sender, the next time you pair After that you can enjoy music by the bluetooth receiver.

TROUBLESHOOTING

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equ pment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>