1Mii B06+ Wireless Audio Adaptor with 3D Surround User Manual
- June 5, 2024
- 1Mii
Table of Contents
B06+ Wireless Audio Adaptor with 3D Surround
User Manual
In the box
Basic Operation
Application scenario
It can turn a wired speaker into a wireless one. Enjoy wireless music, free of
harassment from any wires or cords.
Instructions for operation:
-
Connect your speaker to B06+ audio output with the audio cable provided 3.5mm to RCA).
-
Plug the B06+ Bluetooth Audio Receiver into a power source(using the USB power cable and power adapter provided).
-
Short press( ) button to power on.
-
Pairing – Pair B06+ with your Bluetooth-enabled phone/PC/tablet.
• Set B06+ into the pairing mode, the LED flashes blue / Red alternately fast.
– First-time use: B06+ will auto-enter the pairing mode (with clear memory).
– Afterward: Long press the button to enter the pairing mode. (The LED flashes Blue / Red alternately fast)
• Activate Bluetooth on your phone or another device and click ‘1306+n to connect.
• Wait and connect (For quick pairing, better keep them within 1 meter when pairing) -
Pair with the second device.
• Long press the button to enter the pairing mode again. the LED will flash Blue and Red.
• Activate Bluetooth on the second device and click ‘1306+” to pair.
Note: You can only play music on one device at a time. you need to pause
the music on your device first to play music on the other one.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by ‘MO Ltd. is under license. Other trademarks and trade
names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference. Changes or
modifications not expressly approved by 1Mii Ltd. will void the user’s
authority to operate the equipment This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic
energy and operates within the guidelines found in radio frequency safety
standards and recommendations. These standards and recommendations reflect the
consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the
extensive research literature.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
CE
Mii Ltd. hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.lmii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed
to be used in all EU member states.
Shenzhen 1Mii Technologies Limited
Baoan District Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH
Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from
connecting to an unsuitable power source, using an unsuitable device, or not
following the instructions, as well as damages that did not occur during
shipping, repairs, and adjustments not approved by the company, damages from
misuse, inattention, or improper installation may cause the warranty to be
ineffective immediately. This warranty does not include shipping fees.
Disposal
Always disposes of the used appliance at a recycling center. Do not dispose of
the used appliance together with household waste.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
EVatmaster Consulting GmbH
Bettina. 30 60325 Frankfurt am Main, Germany
[email protected]
https://1mii.com/download-2/
I Scan the code to get more information.
Manufacturer: Shenzhen Ankit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: ShenZhen lMii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
[email protected]
WWW web: www.lmii.com
FCC ID: 2AJU3RT615