meross MSL450HK-EU Smart Table Lamp User Manual

meross MSL450HK-EU Smart Table Lamp User Manual

Safety Information

1. It s recommended that this de: indoors in a dry location only.
2. Use the device within its rated power included in the product specifications on the package.
3. Make sure the device is fully plugged in and kept out of reach of children for safety concern.
4. Please do not disassemble the device, otherwise there may be product damage or security risks.
5. Most accidents resulting from electric tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. Therefore, please read and understand all the safety precautions.
6. Please contact seller for replacement in the event of freight damages.
7. Radio-frequency / Max transmission power: 2400-2483.5MHz, 20dBm.

Installation Guide

1. Download the Meres app.

2. Connect power cable and power the device up.

3. Set up the device.

4. Connect your smartphone or tablet to 0 2.4 GHz ‘Wi-Fi network.

5. Make sure your smart device is covered by strong Wi-Fi signal.

6. The smart device supports 108 13/ iPadOS 13 and later. Itis recommended that you upgrade your iOS or iPadOS to the latest version before pairing with the smart device.

7. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.

8. Tap the “+” “+”icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.

9. Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.

LED and Button Rules

1. When light is OFF Short press to turn on the light.
   When light is ON Short press twice quickly to turn off the light. Short press to change color or effect. Long press to change brightness.

2. Short press to change the working mode: white – color – effect.

3. Short press to enable/disable count-down timer. Hold for 5 seconds to reset the device.

4. LED off: count down timer disabled, Solid white: count down timer enabled

5. LED off: white mode. Solid white: color mode. Solid green: effect mode.
   Two LEDs blink white slowly simultaneously: ready for setup.

Two LEDs blink white rapidly simultaneously: Network not functioning properly. Two LEDs blink in turns: connecting to the Wi-Fi network.

**How to Use

** Voice Control Link Meross to Google Assistant or Amazon Alexa: Set up the device in the Meross app and link it to the voice assistants.

Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow Meross to link with Alexa.
Link to Google Assistant
Go to Account-> Google Assistant and follow the step-by-step instructions to complete the linking process.
Works with

The example commands are as follows:

• “Hey Siri, turn on the smart light.”
• “Hey Siri, turn off the smart light.”
• “Hey Siri, is the smart light on?”

The example commands are as follows:

• “Alesa, set the smart light to red.”
• “Alesa, set the smart light warmer.”
• “Alesa, dim smart light by 30%.

The example commands are as follows:

• “Hey google, brighten smart light.”
• “Hey google, set the smart light to cool white.”
• “Hey google, change the smart light to magenta.”

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are mostly concerned about.

How to fix a pairing failure?

Please visit https://www.meross.com/support/FAQ/230.htm! for solution.

What f I cannot link Meross to Google Assistant/ Amazon Alexa?

How do | manage my Meross device in Apple Home app?

Your Meross smart device will be automatically added to Apple Home app after you finish configuration in the Meross app.

Why is my Meross smart device not responding in the Apple Home app?

This is an exisitng issue with Apple Home app. You need to exit and reboot your Home app to fix this problem.

What if I can't control the smart device with the Meross app?

You can troubleshoot the following: - Check if your home Wi-Fi is working properly. - Make sure that you have disabled access control in your router and that the smart device is not blocked by the router's firmware. - Factory reset your smart device and try to add it again.

6. How do I reset my Meross Smart Ambient Light?

To learn more, you can visit https://www.meross.com/support/fags to find solutions for more frequently asked questions.

SIMPLE DEVICE SIMPLIFY YOUR LIFE

Email._support@meross.com
Website: www.meross.com

Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: No. 1312, Building E6-1, Tianfu Software Park, Chengdu, China

CET PRODUCT SERVICE LTD. (for authorities only)
Beacon House Stoke unchurch Business Park, Isotone Rd, Stoke church High Wycombe HP14 3FE UK
CET PRODUCT SERVICE SP. Z O.O. (for authorities only) UI. Druga 33 102, 95-100 Zgierz Pollen.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>