gosund WO1 WiFi Smart Wall Outlet User Manual

: June 5, 2024
: gosund

Table of Contents

Product Package
Product Overview
Parameter
Main Features
How to Download the Gosund App
How to Pair with the Our App
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

WO1 WiFi Smart Wall Outlet
User Manual gosund WO1 WiFi Smart Wall Outlet

Product Package

Smart plug
User Manual

Product Overview

gosund WO1 WiFi Smart Wall Outlet - figure 1

Parameter

Model: WO1
Input: 120V- 50/60Hz 15A
Rated Power: 1800W Max.
Wi-Fi: 802.11 b/g/n, 2. 4GHz(only)

Main Features

gosund WO1 WiFi Smart Wall Outlet - figure 2

How to Download the Gosund App

Option 1: Search for “Ground” in the Apple APP Store or Google Play.
Option 2: Scan the QR code to enter the download page.

https://smartapp.tuya.com/gosundsmart

How to Pair with the Our App

Open the APP and create your account.
Turn on the plug and put it close to the router when pairing.
Press and hold the ON/OFF button for 5 seconds and release it when the plug starts blinking fast to enter the network pairing mode.

You can add a device in two ways.
Option 1. Tap “+” on the upper right corner and select “Auto Scan”.
Option 2. Tap “+” on the upper right corner to select “Add Manually”, and then select “Wall Outlet (Wi-Fi)”.
Follow the App instructions to complete the operation.

Reset
Turn on the power, hold the Switch/Pairing for 5 seconds, and let go when the socket starts to flash quickly, the reset is successful.
When the socket is in a new network environment, you need to restore the factory settings, and then reconnect to the network.

Warnings and Precautions
Important!

Keep it out of the reach of children and pets.
Do not use this product in humid environments or outdoors. It’s for indoor use only.
Do not place this product near heating devices, such as microwave ovens, stoves, or radiators.
Protect the product from extreme temperatures, and direct sunlight. strong jolts, high humidity, moisture, flammable gases, vapors and solvents.
Do not disassemble, modify, or repair your device, and ask for help from authorized professionals for device malfunction.
Do not use the device when it is no longer working properly or is visibly damaged.
Do not store the device for extended periods in poor ambient
Do not insert your device into another one.

Never use aggressive detergents such as rubbing alcohol or other chemical solutions because these could damage the casing or even impair the functioning of the product.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

MADE IN CHINA
102000.071410