gosund LB3 Smart Bedside Lamp User Manual
- June 5, 2024
- gosund
Table of Contents
gosund LB3 Smart Bedside Lamp
Foreword
Welcome to gosund. This user guide is intended to provide you important information about gosund Wi-Fi Smart lamp It is suggested that you read this user guide before installing the lamp, If you have any questions, please feel free to contact us at service.eu@gosund.com Our customer service team will reply to you as SOon as possible.
Product Package
1. Smart Bedside Lamp
2. User Manual
3. USB Cable 4. Power Supply
Product Structure
Wi-Fi SMART LAMP
Download “Ground” APP
- Search “Gosund” App on App Store, Google Play or scan the QR code below and install it.
- Please open the “Gosund” App.Click register and type in your email address to automatically create an account, otherwise type in your phone number to get a verification code to register an account. If you already have a “Gosund” account, simply click login with your account.
- The free APP “Gosund” is compatible with mobile devices that supports IOS 8.0 above and Android 4.4 above.
Connecting the device with “Gosund” APP
A.Easy Mode (Recommend)
-
Please open “Gosund” App. Tapp the “Add Device” or the “+” sign at the upper right hand corner of the page and select “Lighting”
-
Please make sure that the gousnd Smart Lamp is installed correctly.
-
To switch to Easy mode,you can get the lamp rapidly flash after long touch “gosund” on the lamp for 5 seconds.
Make sure the lamp is now rapidly flashing and confirm it in the app. -
Choose your Home Wi-Fi (make sure your phone is connected to 2.4GHz
Wi-Fi channel not 5GHz) and enter the correct password. If the Wi-Fi network is 5GHz or the password is incorrect, it will lead to “connection failure”. -
Finally, wait to successfully configure then tap “Completed”
B.AP Mode
- Please switch to “Other Mode”,click”AP Mode”
- To switch to AP mode,you can get the lamp slowly flash after long touch “gosund” on the lamp for 5 seconds based rapidly flash.
- Make sure The Lamp is flashing slowly and confirm it in APP.
- Choose your home Wi-Fi and enter the correct password then confirm it in APP
- Choose Wi-Fi hotspot named “Smart Life XXX”, If it shows, the current WLAN network cannot access the Internet. Switch to another network?”, just tap “CANCEL”and to back to the “Gosund APP”
- Finally,wait to successfully configure and tap “Completed”.
Note : if the connection fails in “AP Mode”, please check if your router
is dual-band Wi-Fi.If it is dual-band Wi-Fi, please enter the router
management interface to split
2.4G and 5G Wi-Fi, and then connect
2.4G Wi-Fi.
Using Amazon Echo Quick Guide What You’ll Need…
Make sure your Echo dot is connected with your Amazon Alexa and you have
“Gosund”APP account.
A.Enable our Skill in Alexa APP
Login yourAmazon Alexa,choose “Skill” in the option bar, then search “Gosund” in the search bar; Select “Gosund” in the search result and click “Enable”
- Input your account and password that you have registered at “Gosund APP. When you set the right page, it meansyour Alexa account is Connected with your “Gosund” account.
B.Control Smart Bulb by Voice
After Alexa is linked to your “Gosund” APP, you can now control the lamp via Echo.
-
Discovering device simply say to Echo: “Echo (or Alexa), discover my device.” or choose “add device” to discover the smart lamp. Echo will start to find the device which is added in “Gosund APP. It will take about 20 seconds to show the result. Or you may click “Discover device” on the Alexa APP, it will successfully show available devices.
Note: Echo is one of the wake-up name, the other two names are Alexa and Amazon. -
Support Skill List You can control devices by instruction like below:
- “Alexa, turn on/off(name of the smart lamp)”
- “Alexa, turn on the light.”
- “Alexa, turn off the light”
Note: The name of the lamp must be consistent with the name of the lamp on the “Gosund” APP. The name is recommended to use easy pronunciation of English words. (Amazon Echo just supports English temporarily.)
After-sale & Warranty
All gosund products come witha limited warranty of 12 months from the date of purchase. And we have a professional customer service to attend to your question and comments concerningg our products. Please do not hesitate to contact us at service.eu@gosund.com or at our Official Facebook page. We will do our best to help you resolve any problems you might have about our products until you are satisfied. We appreciate your support and cooperation.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.