gosund WP2 Smart Plug Instructions
- June 4, 2024
- gosund
Table of Contents
WP2 Smart Plug
Instructions
Since the device only supports 2.4G Wi-Fi
connection, please ensure that the mobile phone and the device are connected
under 2.4G Wi-Fi simultaneously.
What’s in the Box
Smart Plug x 1
User Manual x 1
At a Glance
- Indicator Light
- ON/OFF Button（Also Reset Button ）
- Two Independent Sockets
Parameters
- Model: WP2
- Input: 120V~, 50/60Hz 10A Max.
- Rated Power: 1200W Max.
Main Features
Reset
Turn on the power, hold the Switch/Paring button for 5 seconds and let it go
when the socket starts blinking fast the reset is successful.
When the socket is in a new network environment, you need to restore the
factory settings, and then reconnect to the network.
Warnings and Precautions
Important!
Keep it out of the reach of children and pets.
Do not use this product in humid environments or outdoors. It’s for indoor use
only.
Do not place this product near heating devices, such as microwave ovens,
stoves, or radiators.
Protect the product from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, vapors, and solvents.
Do not disassemble, modify, or repair your device, and ask help from
authorized professionals for device malfunction.
Do not use the device when it is no longer working properly or is visibly
damaged.
Do not store the device for extended periods in poor ambient conditions.
Do not insert your device into another one.
Never use aggressive detergents such as alcohol or other chemical solutions
because these could damage the casing or even impair the functioning of the
product.
Note: The image shown in the manual is indicative only. If there is an
inconsistency between the image and the actual product, the actual product
shall govern.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance of 20cm between the radiator & body 