geeni GNC-WW107 Tap Smart WiFi Light Switch User Guide

geeni GNC-WW107 Tap Smart WiFi Light Switch User Guide

Thank you for purchasing your Geeni smart home product. Ready to get started? Download the Geeni app to manage your TAP (and all other Geeni devices) straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices with the touch of your fingertips.

1 Download the Geeni app

2 Register a Geeni account

3 Install

STEP3
Connect TAP’s neutral wire (white) to your home’s neutral wire.
Connect TAP’s load wire (brown, labelled as “SW” on the back of the switch), to your home’s load wire first. Then connect the live wire (black, labelled as “Live” on the back of the switch). to your home’s live wire. Be mindful not to reverse the live and load wires.

Connecting the TAP’s ground wire (green) to your home’s ground wire is optional.

Check that all wire nuts are secured

4 Reset and restart

QUICK TIP: On the TAP Faceplate, the Reset button is also known as the Power Reset button and the Restart button is also known as the Wi-Fi Reset button.

How do I reset TAP and what does the blinking light mean?

Reset TAP by pressing and holding the Wi-Fi Reset (Restart) button for 3 seconds until the indicator begins to rapidly flash. The Wi-Fi Reset button is located on the bottom right side of the switch (not the switch plate) labelled “Restart”.

– Reset one time (press and hold) to reach Easy Mode (Rapidly blinking blue, 2x per second)
– Reset again (press and hold) to reach AP Mode (Slowly blinking blue, every 3 seconds)

5 Connect: Bluetooth Discovery

■ Easiest: Add using Bluetooth discovery

1. Make sure your phone’s Bluetooth is on and the LED is flashing. Press O in the Geeni opp.
2. Click “Add Now” when prompted and follow app instructions

6 Connect: Easy Mode

NOTE: Geeni can’t connect to 5GHz networks.
If the connection fails, try to connect using AP Mode.

7 Connect: AP Mode

Frequently Asked Questions

1. Can I share with family and friends?
   Yes, you can share access to TAP and any other Geeni device. In the Geeni app, press the “Profile” button and click on Device Sharing” to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Geeni app and registered an account.

2. Can I group multiple Geeni devices together?
   Yes, you can group multiple same-type devices by room, location, or however else you want. The same devices can be in multiple groups. For example, if you create a group for Bedroom” and another group for Entire House,” your Bedroom lights can be included in both groups. From your main device list. click on one of the devices you want to group, press the ….. ” button on the top right for advanced settings, and click “Create Group.” You’ll be able to name a new group and choose which devices you’d like to group together.

3. How many devices can I control?
   Genie’s app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

4. My Geeni device has a funny name. How do I rename it?
   From your main device list. click on one of the devices you want to rename, press the “•••” button on the top right for advanced settings, and click “Modify Device Name” (or “Modify Group Name”). You’ll then be able to choose a more familiar name. To rename a particular outlet. click the small pencil icon next to its name.

5. What should I do if the device appears offline or is unreachable?
   Make sure your Wi-Fi router is on line and in range, and check that you have the latest Geeni functionality by clicking “Check for firmware update” in your device settings. If power is connected but TAP is not responding, hold down the Restart button to cycle the fuse and give TAP a jump start.
   

Troubleshooting

Reset the device

System Requirements

Technical Specifications

Support:
If you encounter any issues, please call888-232-3143 (Toll Free)
or email [email protected] for help. Support is available seven days a week.
To explore our full selection of products, visit us at: www.mygeeni.com

©2022 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo are trodemarlcs of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc. Galaxy Sis a registered trademark of Samsung Electronics Co .. Ltd. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and Ts used under license. Amazon. Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners. Made in China

FCC Rules. These limits ore
designed to provide reasonable protection against harmful interference in on residential installation. This equipment generates uses one can radiate radio frequency energy nod, Ft not installed nod used in accordance with the instructions, may co use harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
-Connect the equipment into on outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or on experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

CAN ICES-3 (B) / NMB-3 (B}
This Closes B digital apparatus complies with Canadian ICES-003.

Can’t connect? Need help?

DO NOT RETURN THIS
PRODUCT TO THE STORE

Geeni support:
[email protected]
1 888-232-3143
Tap “Support” in the Geeni app

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>