geeni P1800 Smart Air Purifier User Guide

: June 1, 2024
: Geeni

Table of Contents

Download & Register
Prepare & Plug In
Connect (Easy Mode)
Control Panel
Replacing the Filter
Questions. Troubleshooting. Notices
- VOICE CONTROL GUIDE
Google Home
START GUIDE
What’s in the Box
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

geeni P1800 Smart Air Purifier

geeni P1800 Smart Air Purifier

Download & Register

STEP 1

Download the Geeni App from App Store or Google Play.
|
---|---
Register an account on your Geeni App.

Enter your email address
Enter the verification code and create a password.
Log in to the App.

Prepare & Plug In

STEP 2

Plug In
Place the air purifier on a stable surface where the air inlet and outlet are completely unobstructed

Connect (Easy Mode)

Step 3

Connect to App

Press and hold the Wi-Fi key until your hear a beep and the light flashes to enter pairing mode.
$Connect $Easy Mode$$
Search for new devices using the Geeni app from your smartphone. Make sure your phone’s Bluetooth is on and the pairing light on the air purifier is flashing.
$Connect $Easy Mode$$
The Geeni app should locate the air purifier in no time. Navigate to the then tap ‘Add Now’ and it will connect.
$Connect $Easy Mode$$

Control Panel

Control Panel Keys

Circular Running Lights
Show PM2.5
Timer / Filter Reset
Fan Speed Control
Power / Child Lock
Light
Wi-Fi
Fan Speed, smart, sleep function indicators

Fan Settings

Press the fan speed adjustment key to select fan setting.
Low
Medium
High
Sleep Mode: Fan runs on low, and screen lights are dimmed.
Smart Mode: Fan will automatically adjust speed based on air quality detected.

Child Lock
Press and hold the power button for 3 seconds to lock the air purifier, all other keys will be disabled. Press and hold for 3 seconds again to unlock.
Timing Function
Press the timer button to select how long for the air purifier to run, between 1 – 8 hours, and the air purifier will automatically turn off after that time.
Filter Reset Indicator
When the filter has expired,the filter reset key will flash indicating t is time to replace the filter. Turn off the air purifier and replace with a new filter,then turn on the air purifier, press and hold the filter reset key 2 times for 3 seconds within 15 seconds, and the light will turn off Instructions for replacing the filter on pg. 6
Light
Press once to dim the lights, press a second time to turn off all lights, press a third time to turn the lights back on.
Wi-Fi Pairing
Press and hold the Wi-Fi key until your hear a beep and the light flashes to enter pairing mode

Replacing the Filter

Press the power key to shut down, and unplug
Turn shut down, and unplug. Turn the bottom cover counter-clockwise to open.
Take out the filter
Take the plastic bag off of the new filter screen.
Insert the new the filter screen.
Replace the bottom cover position, turn clockwise to align the lock arrow.

Questions. Troubleshooting. Notices

Frequently Asked Questions

Can I share with family and friends?
Yes. In the Geeni app, press the Profile button and click on the “Device Sharing” button, and you will be able to give or revoke sharing permissions.
In order to share, the other user should already have downloaded the Geeni app and registered a new account.
Can I group multiple Geeni devices together?
Yes, you can group multiple devices of the same type together, by room, location, or however else you want. The same devices can be in multiple groups. (For example, create a group for “Bedroom” and another group for “Entire House”, and your Bedroom lights can be included in both groups). From your main device list, click on one of the devices you want to group. Press the “•••” button on the top right for advanced settings, and click Create Group. You’ll then be able to choose which devices you’d like to group together and will be able to rename them.
How many devices can I control?
Geeni can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.
My Geeni device has a funny name. How do I rename it?
From your main device list, click on one of the devices you want to rename, press the “•••” button on the top right for advanced settings, and click Modify Device Name (or Modify Group Name, if applicable). You’ll then be able to choose a more familiar name.
The device appears offline or unreachable, what should I do?
Make sure your Wi-Fi router is online and in range. Make sure you have the latest Geeni functionality by clicking “Check for firmware update” in your device settings.
What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

Troubleshooting

Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again

Reset the device

To reset the device, press and hold the Wi-Fi key until it beeps and the light starts blinking.

System Requirements

Mobile device running iOS® 9 or higher or Android™ 5.0 or higher
2.4 GHz Wi-Fi network
Geeni® App

Technical Specifications

CADR Rating: 88ft3/min (150m3/hr)
Coverage: Up to 215ft2
Filter Life: 3000 hours
Power Adapter Voltage: 120V
Dimension: 8.27in x 8.27in x 13.46in
Wi-Fi: IEEE 802.11n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)

Warning

Don’t cover the air inlet or air outlet.
Don’t operate the device with wet hands.
Don’t allow any liquid to enter this product.
Don’t use this product in a humid place.
Don’t keep this product close to a heat source.
Don’t place anything or insert any unknown objects in this product.
Don’t put this product close to flammable items (such as curtains, aerosols, organic solvents, etc.)
Use the product only on a stable surface.
Unplug when not in use for an extended time.
Please turn off the equipment and unplug before moving.
Please unplug when assembling or cleaning equipment.

VOICE CONTROL GUIDE

Thank you for purchasing your Geeni smart home product. Make sure your devices are already set up using the Geeni app, then follow these steps.

Name and Control Each Device by Voice

Symbols

To control your Geeni smart devices just say “OK Google,“ or “Hey Google,“ and ask. Make sure your devices are already set up using the Geeni app.

Things you can say
*Some commands require compatible devices.

Google Home

Open the Google Home app and go to Home Control in the menu
Tap the “+“ button.
Choose “Geeni“ from the list of Home Control partners.
Authorize your account with Google Home using the username and password from your Geeni app

Now your Google Home app and Geeni devices are linked! You’re now able to say “Hey Google“ and control your Geeni devices.

At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Home will refer to them by the same name.
So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“ then Google Home will use that same name later on. You can always give it a nickname using the Google Home app as well. You can also assign bulbs to a specific room, like “Bedroom“ or “Kitchen.“ Google Home will be able to control devices by room.

Symbol To control your Geeni devices, just ask Alexa. Make sure your devices are already set up using the Geeni app.