iSwift Metaura Pro Wearable Smart Air Conditioner User Manual

Mataura Pro Wearable Smart Air Conditioner
User Manual

Mataura Pro Wearable Smart Air Conditioner

Download the APP

http://metaura.us

Scan OR code for latest product instruction
Search in the APP store
Please scan the QR code of the APP in the package to download directly, or open the mobile app store, search for “Mataura” APP and follow the steps to download.
Mini program Please scan the OR code In the package to access the mini program

1. In the off state, touch the power button to turn on the machine, the wireless function will be turned on, the product will automatically enter the wireless pairing mode (no connection within 605, the wireless search will be automatically turned off, and the search state will be restored after restarting)
2. Turn on the Bluetooth of your mobile phone.
3.  Please enter the APP/ Mini Program, and search for the device according to the following steps. When the wireless name “LI-I-Metals° PRO” appears, click “Connect”. When the “Connected” is displayed, the pairing is successful. 

Reconnect
When the pairing is successful, open the APP again (Bluetooth on) , it will automatically reconnect with the product (no matter the product is on/off, the wireless is automatically turned on). Disconnect/switch connected devices
Open the APP operation interface, as shown in the figure, you can disconnect the wireless connection or switch the connected device,

APP operation You can control the product in the APP as shown in the figure when the wireless connection is successful.
OTA firmware upgrade Please follow the steps in the following figure on the APP to upgrade the firmware.

Reset
When the product is powered OH, hold the power button and button for Ss to clear pairing information.

Overview

Instructions

Wearing
Take out the product with the air outlet facing up and wear it around your neck.
Smart wearing detection Touch the power button to turn on the machine. The smart wearing detection will be automatically turned on otter the product is put on. After taking it off, it will automatically enter the standby mode in 30s, and the power button breathing light will flash. When you wear it again, it will automatically resume the previous working state, in the standby state, touch the power button again to shut down.
On/off & mode adjustment Touch the power button to turn on1off the machine. Press and hold the button to adjust the gear (smart mode-c.00lingtheating mode-shut down, smart switch).

Mode instructions

Smart mode: There will be two beeps, the white indicator light will be on, and the temperature can be adjusted within the range of 16°C-35°C. The product will intelligently detect the temperature and turn on/off the coifing/hexagon function according to the difference between the ambient temperature and the target temperature. Cooling mode: A “beep” sound is heard, the blue indicator light Is on, and the temperature can be adjusted in the range of 16°C-30°C; touch the “41– button to adjust the air speed in three gears (0-100% steeples adjustment in the APP)

Heating mode. There will be three beeps, the red indicator light Is on, the temperature can be adjusted in the range of 45°C-55°C, the default is no wind, and the maximum wind speed con only be adjusted to 30%.

Wind power adjustment Touch the “s/-* button -increase/decrease the target wind power. When it Is adjusted to the maximum/min-Imam value, 2 short beeps will be heard.

Temperature adjustment

Press and hold the “el..” button -increase/decrease the target temperature. When it is adjusted to the maximum/minimum value, 2 short beeps will be heard.

Temperature / Power Display
Flash – temperature adjustment mode, display temperature with °C
Steady on – display battery and lightning symbol

Charging
When the battery power Is lower than 10%, the buzzer will beep 3 times to indicate low power (automatic shutdown when no power is (wadable), please plug in the charging cable in time to charge (Adapter with PD/QC protocol supports 23W charging)

Specifications

Bag x1, User Manual x1

The parameters above are derived from the laboratory of RANVOO. The actual parameters would be different because of products or other factors. The image shown here is indicative only.

Attentions

Important notice: save for future use. It should not be used by people who cannot take care of themselves, infants or people who .are not sensitive to heat.

1. This product should not be used by children under the age of 10 alone, unless the parent or guardian has set the product in advance, or has guided the children about how to use the product.
2. Do not use this product for baby strollers.
3. Please do not put your fingers or any other objects into the protective net when the product is working, to prevent injury.
4. This product contains highly sensitive electronic components (including batteries, cooling plates, etc.), which can be damaged or result in personal injury if dropped, burned, pierced, extruded, disassembled or exposed to high temperatures, liquids or high concentrations of industrial chemicals (including near evaporative liquefied gases, such as helium).
5. Some components of this product may interfere with related medical equipment such as cardiac pacemakers and defibrillators. It is not recommended for users with implanted medical devices to use this product. If you need to use it, please consult your doctor first and use it under the doctor’s advice. (After getting permission from your doctor) If you find that this product is interfering with your medical equipment, please stop using it.
6. Please choose to use the appropriate time and temperature, according to your physical condition and environment temperature. It Is recommended that you use the cooling/heating mode for no more than 30 minutes at a time to avoid the risk of discomfort in oversold or low temperature burn.
7. If you feel discomfort in the process of using or after use, please stop using. In case of any accident, please see a doctor immediately.
8. Please avoid subjecting the product to shocks such as long-distance vibration or falling from height.
9. It is prohibited to use the product after immersion In water.
10. Do not place the product In places where it is humid, of high temperature and other extreme conditions. Do not put the product in the car to expose it to the sun, so as not to cause damage to the product.
11. Do not expose this product to rain, liquid or moisture to reduce the risk of fire or electric shock, do not place objects containing liquids (such as vases, etc.) on or near this product
12. Don’t use it near the heating equipment and other places with hot air or firework, or in places (such as swimming pool, hot spring, kitchen, etc.) that are prone to generate a lot of dust, fog, and oil smoke.
13. Please use a charger that has obtained certification and meets standard requirements for charging. There is a risk of death or injury by charging with a charger that does not meet the certification standards.
14. Please stop using the charging cable In case of breakage. Using a broken charging cable or charger, or charging in a humid environment, can result in the risk of Fire, electric shock, injury, damage to products or other property.
15. When the product is faulty and needs to be repaired, it must be replaced by the manufacturer, maintenance department or professionals to avoid danger. Other people people are not allowed to dismantle and repair. 16. When not in use, clean the oil and dust from the product surface. After cooling to room temperature, store in a dry and ventilated place, avoid pressing.

Battery Warning

This product is equipped with a built-in lithium battery, and please pay attention to the followings:

1. Please charge the product in time when the battery is low. To protect the battery, please turn on the product every 3 months until the battery power runs out and then fully charge the product, when not in use for a long time. It is recommended to use and store it in a suitable environment.
2. It is forbidden to disassemble, hit, squeeze or throw it into fire. If severe swelling occurs, stop to use it and handle it to professional maintenance
3. There is a risk of explosion if the battery is improperly replaced, and it can only be replaced with a battery of the same or equivalent type by a professional
4. The battery (battery pock or assembled battery) shall not be exposed to overheated environments such as sunlight or fire.
5. Products containing lithium batteries should be handled separately from household waste. If the product is disposed of, it is necessary to remove the battery and insulate the positive and negative ends and put it into the designated recycling locations or hand it over to the environmental protection recycling department for disposal, and cannot discord It at will
6. Steps to remove the battery
   Use tools to pry the decorative panel and metal decorative parts;
   2 Remove the screws on the right shell and pry the upper and lower shells with a screwdriver,
   Remove the screws of the circuit board with o screwdriver, then unplug the battery socket to take out the battery,

4. Remove the left battery In the same way. (Special warning. Do not cut off all the cables between the battery and the circuit board at the same time.)

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and con radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications However, there rs no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver ts connected.
– Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (I)this device may not Couse harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation.

SHENZHEN RANVOO DIGITAL TECHNOLOGY CO., LTD.
Address : RM1215, BLK C, Shanta Technology BLDG, Munshi Avenue, Munshi ST,
Longhop DIST, Shenzhen, China
Email : [email protected] Official Website :
https://metoura.us
Shenzhen RANVOO Digital Technology Co., Ltd.
All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>