FALCON RIDGE John Deere Gator XUV 590i S4 Rear Panel Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
FALCON RIDGE John Deere Gator XUV 590i S4 Rear Panel
INSTALLATION INSTRUCTION
Notice:
Do not smoke inside the cab or expose the enclosure to direct flames. Cab is
Flammable.
-
Be sure to read these instructions thoroughly before opening and installing the John Deere 550 S4 Soft Rear Window. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature prior to installation.
-
Carefully open the carton and remove the Rear Window on a large flat surface that is clean and free of dirt.
-
Check over the parts included in the carton with the parts list shown below:
-
Begin installation of the Rear Window at the top. Take the two 14” adhesive Velcro strips and place them on the horizontal bar that connects the two sides of the roll cage. Place one on each side of the brake light facing towards the front of the vehicle and slightly upwards.
The photo below shows the proper placement: -
After placing the Velcro on the roll cage, attach the rear window. Across the top of the rear window is a cutout for the brake light, line this cutout up with the brake light and attach the rear window to the adhesive Velcro.
See the Photos Below: -
The next step is to attach the sides of the rear window to the roll cage. There are 5 strips of double-sided Velcro sewn perpendicular to the edge of the panel. Take the 6” adhesive Velcro strips and wrap them around the bars where each double-Sided Velcro strip lines up. Then wrap the double-sided Velcro around the adhesive strip on the bar. The photos below show how this works.
-
You will see a series of straps and buckles down each side of the rear window. You will not be using these right now but if you ever decide to purchase a set of Mammoth Designs doors these will connect the two panels. For now, just take the straps and lace them through the buckles to keep them secure and out of the way.
Cleaning and Storage Recommendations:
- Before removing the Mammoth Cab for storage, make sure it is very clean in order to prevent scratching of the window panels. Clean with a soft rag or sponge using a mild liquid detergent soap and warm water solution. Never rub the windows with a dry cloth or rag! Let the Cab dry thoroughly before attempting to roll it for storage.
- It is important that the Cab be rolled up for storage rather than folding. Folding will cause damage to the windows!!! Carefully roll up the Cab similar to the way it was when it was packed at the factory. On a large, clean, and flat surface, fold the doors over the rear panel first, then, interleave the top and windshield on top of the doors. Begin rolling the Cab into a roll approximately 8 inches in diameter. Put the rolled Cab back into the carton for storage at normal room temperature. It is best not to expose the Cab to either extremely hot or cold temperatures when storing.
- A special cleaner conditioner is available from Mammoth Designs that will greatly increase the service life of the Cab Enclosure. In addition, if additional hook and loop sets are needed, they can also be ordered
Return Policy
If for any reason you choose to return this product it must be returned within
30 days from the date the item is received. You MUST package the product
exactly as it was originally packaged from the factory to get a full refund
for the product!
The vinyl windows should never be folded when packaging in the box or for
storage purposes. Lay all the windows on top of each other with the canvas
folded in between and the paper (if available) on both sides of the windows.
All returned products will be inspected upon arrival at the production
facility and must be in unused, factory-new condition to receive a refund – a
25% restocking fee will apply.
If ordered from Falcon Ridge please call at
606-845-7439 to gain a return
authorization number, use our preferred shipping carrier (UPS) to return the
item (unless the item is defective, you are responsible for paying the
shipping to return the item.) Any returns submitted to Falcon Ridge without
a return authorization number will be charged a 20% restocking fee. If
ordered from one of Falcon Ridge’s many distributors, you must first call them
and see what their return policy is. Once your item reaches our production
facility, our customer satisfaction team will inspect your item to ensure
unused, factory new condition.
NOTE:
All windshields must be returned with the original protective film intact and
not removed. Do NOT REMOVE if you have any intentions of returning the item.
Refund/ replacement of a windshield will only be processed on items with
original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect
them during transit and ensure your returned item arrives back factory fresh,
and in new resalable condition (any returned items that have been used,
altered or damaged in any way will not be subject to a refund.) All contents
including instruction manuals, accessories, hardware, Velcro, etc. must be
included in your return shipment. Only items in OEM factory new condition will
be approved. Once returned items are received, a credit will be issued to the
original credit card/ payment method used for the purchase. Outbound shipping
and return shipping costs will not be refunded. Please allow 4 to 6 weeks for
your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or
Windshields! Below are the terms under which your product is covered under our
manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure,
tops and/or windshield due to defects in the product. Please refer to the
return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this
time frame we will gladly correct the problem or replace the enclosure, tops
&/or windshield. Upon submitting for the correction or replacement we will
need to receive pictures of the defect in material or workmanship along with
the receipt from the date of purchase.
Thank you,
Falcon Ridge
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>