Yealink T33G SIP Phone

Yealink T33G SIP Phone

Need support? Connect with us at www.northland.net/support or Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative

INSTALLING YOUR YEALINK T33W PHONE

BACK OF THE PHONE
KEY:

| HEADSET: Plug your headset into this port.
---|---
| PC: Plug your
PC into this port if your PC is connecting through your phone.
| INTERNET: Plug into this port to connect to your network.
| HANDSET: Plug your handset into this port.
| DC5V: If your network does not provide Power Over Ethernet (P.O.E.), a separate power supply
will accompany your phone.

GETTING TO KNOW YOUR YEALINK T33G SIP PHONE

status.
2| PHONE SCREEN| Shows information about your phones, such as calls, messages, Softkeys, time and date.
3| LINE / FEATURE KEYS| Access your phone lines and features.
4| SOFTKEYS| Accesses the feature/function that appears on the display above them. Softkeys change based on the state of the phone: idle, on a call, in a menu, etc.
5| NAVIGATION KEYS| + Scroll through information or options displayed on the screen. + Access History and Directory.
OK KEY| Confirms actions or answers incoming calls.
X – CANCEL KEY| Cancels actions, exits menus or rejects incoming calls.
6| MUTE KEY| Toggles the microphone on/off.
7| HEADSET KEY| Toggles the headset mode on/off.
8| MESSAGE KEY| Accesses voicemail.
9| REDIAL KEY| Redials a previously dialed number.
10| SPEAKER| Provides hands-free audio input/output.
11| VOLUME KEY| Adjusts the volume of the handset, headset or speaker.
12| KEYPAD| Allows you to enter numbers, letters and special characters. If a menu item has an index number, you can use the keypad to select the item.
13| SPEAKER| Provides ringer and speaker audio output.
14| REVERSIBLE TAB| Reverses to secure the handset in the cradle when the phone is mounted on a wall.

POWER LED INDICATOR

Solid red
Fast-flashing red
Slow-flashing red
Solid red for .5 seconds and off for .3 seconds| The phone is initializing.
The phone is ringing.
There are new voicemail messages.
The phone entered the power-saver mode.
---|---

LINE KEY LED

The Line Key LED (on the display where you see your Subscriber telephone number) indicators

Solid green
Fast-flashing green
Slow-flashing green
Off| The phone is in use.
The phone is ringing.
There is a call on hold.
The line is idle.
---|---

SCREEN + ICONS

The user screens and icon indicators help you navigate and understand the information on the phone’s status. There are four Idle screens.
FIRST IDLE SCREEN

status icons.
2| Date and Time| Date and Time appear on all three idle screens in the same area.
3| Softkey Labels| Commands are activated by pressing the keys below them. These commands change based on the phone’s state. ie: on a call.
4| Feature Status Icons| Icons to indicate missed calls, new voicemails, etc.
5| Line Keys| Used to make and receive calls.
6| More Key| Scrolls to two additional pages of line/feature keys. Press the key to advance to the next screen.

SECOND IDLE SCREEN      THIRD IDLE SCREEN         FOURTH IDLE SCREEN

1. Displays the Call Park Keys.
2. Displays the Intercom Key and available keys that ca be programmed through CommPortal.
3. Displays the Logout Key and available keys that can be programmed through CommPortal.

MENU SCREEN

To access the Menu Screen, press the Menu Softkey.
To access an item on the menu screen, scroll to the item and press the ENTER Softkey or the OK Key.

and Received (answered) Calls.
5| User Mode| Used by the system administrator and requires an Admin Password.
6| Advanced| Used by the system administrator and requires an Admin Password.
7| Basic| Basic phone settings suck as Time & Date format, display and sound settings, etc.
8| Message| Displays message information (not content) and accesses the voicemail system.

PLACING + ANSWERING CALLS

PLACE A CALL
+ Internal: Enter EXTENSION number.
+ External: Enter 1 and the 10-digit number.
+ Lift Handset or press the Call Softkey.
Or press the Speaker Key.

ANSWER A CALL
+ Phone rings, indicator flashes, available commands appear on the display.
+ Lift Handset or press SPEAKER Key or press the ANSWER Softkey.
+ TO QUIET A RINGING CALL: Press the SILENCE Softkey.
+ TO SEND RINGING CALL TO VOICEMAIL: Press the REJECT Softkey.
+ TO FORWARD TO ANOTHER SUBSCRIBER: Press the FORWARD
Softkey, enter the extension number and press FORWARD again.

PLACE AN INTERCOM CALL: Automatically bypasses ringing and opens the speaker of the party you are calling.
+ Scroll to and Press the INTERCOM Key.
+ Enter an intercom (extension) number.
+ Lift Handset or press the SEND Softkey.
+ Party will hear a warning tone and their speaker is open for you to speak or announce.
+ For privacy, their microphone is automatically muted (they must unmute to speak).
+ If the called party is on another call, their phone will ring.

MANAGE MULTIPLE CALLS:
+ PLACE A SECOND CALL: Press the Line Key, first call automatically holds and you hear dial tone, enter a number.
+ ANSWER A SECOND CALL: Hear Call Waiting Tone, caller ID of second call scrolls across the display (see below).

+ Press the Flashing LINE Key of the ringing call or Press the ANSWER Softkey (first call automatically holds).
You are connected to second call.
+ Press the REJECT Softkey to send the second call to voicemail.
+ Press the END CALL Softkey to end the first call and answer the second call.
+ Press the TRANSFER Softkey to transfer the first caller to another number and then press ANSWER to answer the second call.

Once you place the first call on hold and answer the second call, the Softkeys will change to allow you to toggle between calls.
+ Press the SWAP Softkey to toggle between calls.

NAVIGATING A CONNECTED CALL

SPEAKER: Press to make or answer any call without lifting the Handset.
+ TO SWITCH TO SPEAKER FROM HEADSET/HANDSET: Press the SPEAKER Key, replace the handset in the cradle.
+ TO RESUME PRIVACY: Lift Handset or Press the HEADSET Key.
+ TO END SPEAKERPHONE CALL: Press the END CALL Softkey.
MUTE: Turn off your Microphone (Speaker, Handset + Headset) to allow you to speak privately. The caller cannot overhear office/background noise or conversations.
+ TO USE: Press the MUTE Key. A mute symbol appears on the display, speak privately.
+ TO RESUME CONVERSATION: Press the MUTE Key again.
HOLD: This is an exclusive hold to your telephone. No one else can retrieve it.
++ TO HOLD A CALL: Press the HOLD Softkey or the HOLD Key on the phone.
++ TO RETURN TO CALLER: Press the LINE Key or Press the RESUME Softkey or Press the HOLD Key again.

INCALL SCREEN

TRANSFER

TRANSFER: This allows you to connect your call to someone else (with call online)
Announced: Press the TRANSFER Softkey.
The current call is automatically placed on hold.
Enter the number you are transferring to and press the SEND Softkey.
Wait for the person to answer, announce the call.
+ COMPLETE TRANSFER: Press the TRANSFER Softkey, call is connected, hang up.
+ TO RETURN TO HELD CALL: Press the END CALL Softkey and then press the RESUME Softkey.
Blind Transfer: Press the TRANSFER Softkey.
The current call is automatically placed on hold.
Enter the Number and press the B TRANSFER Softkey.
TRANSFER TO VOICEMAIL: Sends a caller directly to voicemail without ringing the phone.
+ Press the TRANSFER Softkey or press the TRANSFER key on the phone.
+ The current call is automatically placed on hold.
+ Dial *99 and enter the EXTENSION Number.
+ Press the B TRANSFER Softkey immediately.

Need support? Connect with us at www.northland.net/support or Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative

ADHOC CONFERENCE

ADHOC CONFERENCE allows you to do a multi-call conference (with call online)
+ Press the CONFERENCE Softkey. The first call automatically holds, listen for dial tone.
+ Enter the second number (internal or external) and press the SEND Softkey.
IMPORTANT: Wait for answer and announce the conference.
+ Press the CONFERENCE Softkey again, all parties are connected.

ADDITIONAL CONFERENCE TOOLS

+ Press the CONFERENCE Softkey to add additional parties.
NOTE: Depending on your system there are limitations to how many parties can be added.
+ Press the HOLD Softkey to place all parties on hold.
+ Press the MANAGE Softkey for more management tools.
(See screenshot below).
+ Press the MORE Softkey for additional commands.
On the MORE Screen:
+ To speak privately to one party, press the SPLIT Softkey.
This places all parties on hold. Highlight the party you wish speak privately with and press the RESUME Softkey.

CONFERENCE MANAGEMENT
When you press the MANAGE Softkey, the CONFERENCE MANAGE Screen is displayed.

Scroll to the party you want to manage.
+ Press the FAR MUTE Softkey to mute the highlighted party.
+ Press the REMOVE Softkey to disconnect the highlighted party.
+ Press the FAR HOLD Softkey to place the highlighted party on hold.
+ Press the BACK Softkey to return to the previous screen.
This places all parties on hold. Highlight the party you wish speak privately with and press the RESUME Softkey.

CALL PARK
CALL PARK: This allows you to place a call on hold in the system and assign it to a Call Park Slot also referred to as an Orbit Code. The call can be retrieved from any telephone in the system by pressing the associated Call Park Slot Key. You will need to press the MORE Key to see the PARK Keys.
+ TO PARK: With caller on line, press an available Park Key, Park Key will flash red, advise person of Call Park Number.
+ TO RETRIEVE: Lift Handset, press the Applicable Park Key. You are now connected to the call.
+ TO RETRIEVE ON SPEAKER: Press the Applicable Park Key.
NOTE: If parked call is not retrieved within a preprogrammed number of seconds, the call will “Callback” to the phone it was parked from.

HISTORY LISTS + CONTACTS LISTS

HISTORY: Displays a list of the last calls PLACED, MISSED, AND RECEIVED. You can use these lists to make calls or view caller information.
+ TO USE: Press the HISTORY Softkey. The display shows all recent calls. The default list displayed is ALL Calls. Use the NAVIGATION
Keys to scroll through the individual logs.
+ TO CALL: Scroll to the number you wish to call and press the SEND Softkey.
+ TO SEE CALL DETAILS: Press the OPTION Softkey and then select DETAIL.
+ TO ADD TO YOUR CONTACTS: Press the OPTION Softkey and select ADD TO CONTACTS. Update any information and press the SAVE Softkey.

GETTING TO KNOW YOUR CONTACTS LISTS

NETWORK CONTACTS: The Network Contacts are located within the CONTACT Softkey. They are divided into three groups.
CONTACTS: All contacts are programmed into your phone book by a system administrator or by you either in CommPortal, through the Contacts Softkey or by saving from Call History Lists. These will import to your other Subscriber applications during the nightly reboot.
EXTENSIONS: All extensions in your business group.
MLHGS (MULTI-LINE HUNT GROUPS): If you are a member of an MLHG, the extensions will appear in this directory.
NOTE: The above Contacts can also be accessed through the DIRECTORY. The DIRECTORY is located on the MENU Screen.

+ Press the BACK Softkey to return to the previous screen.
+ Press the UPDATE Softkey to update contacts that were edited in CommPortal.
+ Press the SEARCH Softkey to search for a contact.
+ Press the ENTER Softkey to view the highlighted Contacts List.

+ TO PROGRAM: Press the CONTACTS Softkey.
Scroll to and select the list you want to add the contact to.
Press the OPTION Softkey.
Scroll to and select ADD.
Enter the contact’s information. You can program multiple numbers in one entry.
When complete, press the SAVE Softkey.

+ TO SEARCH: Press the CONTACTS Softkey.
Tap SEARCH on the Contacts list you.
Begin spelling the name. Use the 0 as a space key. (As you enter letters, the system presents possible matches).
Highlight the name and press the CALL Softkey.
+ TO EDIT OR DELETE A CONTACT: Press the CONTACTS Softkey.
Scroll the CONTACTS list the contact is in.
Press the SEARCH Softkey.
Begin spelling the name. Use the 0 as a space key. (as you enter letters, the system presents possible matches).
Highlight the name and press the OPTION Softkey.
Scroll to and select the action you want to complete.
Complete the action and Press the SAVE Softkey when applicable.
NOTE: You can also add and edit contacts from the CommPortal User Interface.

CONVENIENCE FEATURES

PAGING: Accesses telephone speakers to make an announcement
+ TO USE: Lift Handset, press the PAGE Key, wait for tone, make an announcement, press the END CALL Softkey, hang up.

GROUP PICK UP: Allows you to pick up another phone you hear ringing in your group (you must be programmed in a group by a System Administrator).
+ TO USE: Hear another phone ringing in your pre-programmed group.
Press the PICK UP Key or dial *11 to connect a call.

DIRECTED PICK UP: Allows you to pick up a “specific” extension you hear ringing.
+ TO USE: Hear another phone ringing that is not in your preprogrammed group.
Press the DIRECTED PICK UP Key or dial *12.
Enter the EXTENSION number you wish to pick up.

DO NOT DISTURB (DND): Stops all tones and ringing to your phone and sends all calls to voicemail.
+ TO USE: Press the DND Softkey. Your line key icons turn red and a DND icon appears in the Status bar.
+ TO EXIT: Press the DND Softkey.

CALL FORWARD: Forwards your phone to ring at a different number.
+ TO USE: Press the MENU Softkey.
Scroll to and select the FEATURES Icon.
Scroll to and select CALL FORWARD.
Select Always Forward, Forward on Busy or Forward on No Answer and press the arrow next to OFF.
Enter the contact information in the Forward to field.
If you would like to be able to dial a code to activate and deactivate the same forward again, enter a code.
If you choose the NO ANSWER FORWARD option, choose the desired ring time to wait before forwarding.
Tap the three dots in the top right of the display.
When all information is complete press the SAVE Softkey.

NOTE: You can program features such as DND and Call Forward on available keys. See the CommPortal User Manual for more
information.
HOT DESK: This allows you to log in/out of other telephones within your business group.

+ Scroll to the fourth Line/Feature Screen.
+ Press the LOG OUT Key.
+ Press the OK Softkey to confirm. The phone will reboot and the current subscriber will be logged out.
+ When the phone completes the reboot, you will see a LOGIN Softkey.
+ Press the LOGIN Softkey and enter your subscriber number and your EAS Password.
+ When the phone comes back up, you will be logged in.

RINGS + INDICATORS

RINGS
Your telephone rings differently for different types of calls.
EXTERNAL: Two short rings repeated (a new external call or a transferred external call).
INTERNAL: Single ring repeated.
ADJUST RING VOLUME
You can adjust the volume while the phone is ringing or idle.
Leave handset in place
Press the PLUS/MINUS VOLUME CONTROL Key to adjust the ring volume when your phone is idle.
RING TONES
You can select from several preprogrammed ring tones so that your phone rings differently than someone who sits near you.
Ring Tones can be programmed through the CommPortal User Interface.
Refer to the CommPortal User Manual at www.northland.net.

BASIC SETTINGS + FEATURES

The BASIC SETTINGS Icon on the MENU Screen consists of four areas of information: Status, Features, Basic Settings and Advanced Settings (see below). Most of these settings are self-explanatory. Settings covered in this guide are indicated with an *.
For more information on other settings, please refer to the Yealink User Guide at https://support.yealink.com.

administrator may ask you to do this.
Update Configuration| When requested by a System Admin, this will apply changes to system settings without restarting the device.

STATUS INDICATORS

STATUS BAR ICONS
The icons in the Status Bar help you easily get the current phone status, such as call and message status.

YOUR VOICEMAIL

VOICEMAIL: The voicemail system is voice prompted with easy-to-follow instructions and commands.
FIRST TIME VOICEMAIL SET UP
+ Dial *99.
+ Enter your 10 digit subscriber number and press #.
+ Enter the EAS Pin that you were given by your System Administrator.
+ Follow the audio instructions to create a password, record your name + record your personal greeting.
NOTE: The above steps can also be completed in CommPortal. This is an important part of identifying you in the system.
There are multiple greeting types available for you to choose from:
+ PERSONAL GREETING: Plays to everyone that calls you
+ EXTENDED ABSENCE: Plays when you will be away from your office or phone for meetings/vacation, etc.
You can turn off message acceptance when using the extended absence greeting.
The system will remind you extended absence greeting is playing.
+ SYSTEM GENERATED: A synthesized greeting that’s set up to include your phone number or recorded name.
+ BUSY: Plays when you have active calls on all available lines.
+ OUT OF HOURS: Can be set to play outside of your normal business hours, weekends and holidays.
+ FORWARDED TO VM: Plays when you have your phone set to forward to voicemail.
NOTES: Through the Self Service CommPortal, you are able to:
+ Use a wizard to set up your voicemail for the first time.
+ Record and change greetings.
+ Choose your voicemail to email options.
+ Change your login for voicemail so you’re not required to enter your mailbox and pin each time you press the VM Softkey.

LOG IN TO VOICEMAIL FROM ANY TELEPHONE
Log in to voicemail from any account phone or external phone to listen to messages, work with a personal greetings and other voicemail settings.
LOG IN FROM YOUR OWN PHONE (VISUAL VOICEMAIL):
+ Press the VOICEMAIL (Envelope) Key.
+ Messages are displayed on the screen.
+ Press the BACK Softkey to return to the IDLE Screen.
+ Press the SEND Softkey to call the party.
+ Press the OPTION Softkey to see additional message options.
(See below).
+ Press the PLAY Softkey to listen to the message.

MESSAGE OPTIONS

+ Select DETAIL to see the date, time, and duration of the message and view other options such as CALL and DELETE Softkeys.
+ Scroll to and select MARK AS NEW to keep the message as new after you have listened to it.
If you have not listened to the message this option will read MARK AS READ.
+ Scroll to and select ADD TO CONTACTS to add to your personal contacts list.
+ Scroll to and select ADD TO METASWITCH CONTACTS to add to the Metaswitch Contacts list.
+ Scroll to and select CALL VM to log into the voice prompted voicemail.
+ Scroll to and select DELETE to delete the individual message.
+ Scroll and select DELETE ALL to delete all voicemail messages.

OPTIONS WHILE PLAYING A MESSAGE

+ Press the PAUSE Softkey to pause the message.
+ Press the SEND Softkey to call the party.
+ Press the NEXT Softkey to go to the next message.
+ Press the STOP Softkey to stop the message and return the MESSAGE Screen.
NOTE: Only onscreen options can be used when listening to your messages through the display.
To access more options you must log in using one of the methods below. See page 15 for additional options.

LOG IN FROM ANY EXTERNAL TELEPHONE:
+ Dial: 315-671-0031
+ Enter your 10 digit telephone number and press the # key
+ Enter your pin and press the # key.
+ Press 1 to listen to your messages.

LOG IN FROM ANY PHONE IN YOUR BUSINESS GROUP:
+ Dial: *99
+ Enter your 10 digit telephone number and press the # key
+ Enter your pin and press the # key.
+ Press 1 to listen to your messages.

YOUR VOICEMAIL

COMMON VOICEMAIL COMMANDS
Main Menu

1. Listen to messages
2. Send a message to another user
3. Work with personal greetings
4. Mailbox settings
5. Work with Reminder Messages
6. Access deleted messages
7. Switch Account (log into another account)
   0 Access Help

• Exit Voicemail or return to the previous menu

Listening to Messages

1. Repeat
2. Save
3. Erase
4. Reply
5. Send a copy
6. Increases message volume
7. Slows the message playback down
8. Pause / Resume
9. Speeds the message playback up

   Next Message

   11 Previous Message
   77 Skip backward 5 seconds
   99 Skip Forward 5 seconds

NOTES: Star (*) will always back you up to the previous menu Pound (#) will bypass a user’s personal greeting.

ADDITIONAL VOICEMAIL SETTINGS
There are additional voicemail settings available in the main menu. Some settings are only available when you log in through a telephone. See page 14 for how to log in from any telephone. See the CommPortal User Guide for settings that are available through CommPortal.

WORK WITH GREETING SETTINGS
From the Main Menu, press 3 to work with Greetings. The following greeting settings are available.
Press 1 to work with the personal greeting
Press 2 to work with the extended absence greeting
Press 3 to choose a system-generated greeting or to work with your recorded name
Press 5 to work with the greeting that plays when your phone is busy
Press 6 to work with your out-of-hours greeting (this allows to set a schedule for a greeting that plays outside of your normal business hours). See also the CommPortal User Guide.
Press 9 to work with the greeting callers here when your phone is set to forward all calls to voicemail

WORK WITH TIMESAVER AND CONVENIENCE SETTINGS
From the Main Menu, press 4 to work with Settings. The following settings are available.
Press 1 to work with group lists – add / edit / delete group lists.
Press 2 to work with timesaver settings – turn autoplay on / off, work with Urgent Message settings and change your message header and body settings.
Press 3 to work with Security – change the pin, set fast login or set skip pin.
Press 5 to work with Notifications – message waiting indicator, email notifications and phone notifications.
Press 6 for Additional Settings – Check the Operator number or turn Marketing broadcasts on / off.
Press 0 to hear helpful hints.
TRANSFER TO VOICEMAIL: Sends a caller directly to voicemail without ringing the phone.
+ Tap TRANSFER, call automatically held
+ Press *99 and enter EXTENSION Number
+ Tap TRANSFER and then tap TRANSFER again immediately

LEAVE A MESSAGE FOR ANOTHER USER WITHOUT RINGING THE PHONE:
+ Press *99
+ Enter Extension Number and Press SPEAKER or tap AUDIO CALL.

Need support? Connect with us at www.northland.net/support or Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative.

DOWNLOAD RESOURCES

• Yealink T33G SIP Phone [pdf] User Manual T33G, SIP Phone, T33G SIP Phone, Phone
• Read more: https://manuals.plus/yealink/t33g-sip-phone-manual#ixzz7gUtYFZjA

FAQ’S

Where can I get the latest software for my phone?

Please visit our website at www.northland.net/support to download the latest software.

How do I use the softkeys?

The softkeys are used to access additional features and functions of your phone. The softkeys change based on the state of the phone: idle, on a call, in a menu, etc. For example, when you are on a call, pressing the ?” key will display the call timer and pressing the “#” key will display the call status.

How do I use the navigation keys?

The navigation keys are used to scroll through information or options displayed on your screen. For example, if you are in a menu and want to scroll down to see more options, press the down arrow key until you reach the desired selection.

How do I use the Mute key?

Pressing this key will toggle your microphone on/off. This is useful if you need to take a break or have an emergency and need to mute your phone quickly. This key is also used when you are in a meeting or presentation mode where you want to mute your phone without hanging up or ending your call. Pressing this key again will unmute your phone and allow you to talk again.

How do I use my headset?

Plug your headset into the headset jack located on the back of your phone and then plug the other end into either your PC or wall jack for hands free operation. You can also plug both ends into a PC for full duplex operation (you can listen and talk at the same time). If you have an external speakerphone connected to your PC (for example, with Skype), then you can plug it into this port as well for full duplex operation (you can listen and talk at the same time). Please note that if you plug in an external speakerphone, it will override any other audio device connected directly to this port (such as a headset). This means that if someone calls while an external speakerphone is connected directly to this port, they will hear their own voice through that speakerphone instead of hearing yours through your handset or headset connected directly to this port. If they want to hear what you are saying, they must disconnect their speakerphone from this port before calling you back.

What is Power over Ethernet (PoE)?

PoE is a method of supplying electrical power over Ethernet cabling that uses standard twisted-pair Category 5 cable in place of power cables for devices such as IP phones and wireless access points . The electrical power is carried in addition to data being transmitted across a network cable . PoE uses some of the spare capacity in Ethernet cables which already carry data, so no additional wires or power supplies are required .

How do I connect my Yealink phone to my router?

Go to Menu > Basic > Wi-Fi On Yealink T53, go to Menu > Settings > Basic Settings > Wi-Fi Choose Known Network[s] Choose Add Choose the appropriate Security Mode Enter the Wi-Fi network name, password and, other applicable information Choose Save Here’s how to connect to your Wi-Fi network on your Yealink.

Does Yealink have WiFi?

You will be prompted to scan and connect to available WiFi networks. Alternatively, you can do this manually by going to Menu > Settings > Basic Settings > WiFi. Select Available Networks, and press OK. Select the desired WiFi network and press Connect.

What is Yealink default password?

Step 2: Log into your Yealink phone through a web browser.
The factory default administrative username for the phone is ‘admin’ and the factory default password is ‘admin’.

How do I register my Yealink IP Phone?

Normal Registration
When the handset LCD screen prompts “Press base paging 2s then press Reg.”,
Press the OK soft key on the handset.
Select Register Handset.
Select the desired base and then press the OK soft key.
Press the OK soft key after searching a base successfully.

How do I add an extension to my Yealink phone?

Programming BLFs
Log into Corenexa Web Client.
Open Automation Manager.
Navigate to Services > Endpoints.
Search and find the phone that you wish to modify.
Select the button you wish to modify or click Plus icon at the bottom of the list to add an additional button.
In the first dropdown box, select Extension BLF.

How do I change my Yealink password?

On the phone, go to Menu > Settings > Advanced Settings. Use admin or the MAC password when prompted for a password. Change Password mode from abc to 2aB, especially when entering MAC password.

VIDEO

Yealink T33G SIP Phone
www://yealink.com/

References

• Business Unlimited Support | Northland University
• Business Unlimited Support | Northland University
• High Speed Internet | Business Phone | Syracuse, Utica, Oneida, Rome
• Yealink Support
• Business Unlimited Support | Northland University

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>