RAVEMEN LR1200 Bike Front Lights Instruction Manual
- May 15, 2024
- RAVEMEN
Table of Contents
**RAVEMEN LR1200 Bike Front Lights Instruction Manual
**
Technical Specifications
LED : 1 high-efficiency white LED
Battery : 4000mAh/3.6V rechargeable Lithium-ion battery
Dimensions (Headlight): 106.5mm (L)34mm (W)37mm (H)
Weight (Headlight): 180g
Materials : The main body is made by anodized aluminum; the rear part and
the accessories are made by durable plastic and glass fiber, etc
Package includes : front bike light1, handlebar mount 1, thick silicone
shim 1, thin silicone shim1, USB cable*1
Performance Parameters
Mode| Brightness level| Brightness (Lumens)| Run Time (hrs)| Max distance|
Impact resistance| Water resistance
---|---|---|---|---|---|---
| High| 1200| 1.6| | |
Mid| 600| 3.0
Wide beam| Low| 300| 6.5| 150 meters| 1 meter| IPX6
Eco| 150| 14.5
Pulse flashing| 600| 25.5
Emergency| High| 1200|
Note : The above data are tested in Lab in line with ANSI/NEMA FLT standard and may vary by environment and user conditions.
Quick Guide
Power button : Long press the button 0.5s to turn on/off power; Single
click to cycle through brightness levels.
Intelligent daytime running light mode:
Long press the power button 3.5s until the blue indicator is on to activate
this mode. In this mode, the light will switch automatically between pulse
flashing level (high ambient light) and low brightness level (low ambient
light). The light will also switch off after staying still for 2 minutes and
switch on again with a vibration (auto on-off). To exit this mode, single
click the power button or long press to turn off the light.
Battery indicator: Green:>30% power; Red: 15%-30% power; Red flash: low
battery, please charge your light soon.
Auto power save mode:
When working at the high/mid brightness level and in low battery, the light
will reduce the output and switch to power save mode for runtime extension.
USB C charging : Standard charging time: 3.2h with max input: 5V, DC/1.5A
(approximate values and may vary by user conditions). Built-in over-charge
protection.
Charging indicator: The red indicator is flashing when charging and turns
to constant green when completed.
Other features : Intelligent thermal management circuit to prevent
overheat of LED; Memory circuit to remember the last used brightness level.
Battery Runtime Extension
“The light can be powered by extremal power source, such as power bank (Output 5. 154128 0 stand he runtime of he battery:
Mounting Your Light
- Select the suitable configuration for your handlebar:
One thick sillicone shim
Place the thick silicone shin inside the handlebar mount
One thin silicone shim
Place the thin silicone shim inside the handlebar mount
-
Mount the handlebar mount and adjust the angle for actual needs, then tighten the screw with the hex key provided: (make sure the screw is completely tightened before riding)
-
Slide the headlight in the right direction.
-
Press and hold the quick release tab and slide out the light.
-
Wired remote button (sold separately):
Plug the wired remote button into the tail USB port and use the O ring to fix it near the grip as below.
When power is on, single click to cycle through brightness levels: Press 0.3s and hold to activate max output, release to go back to previous brightness level.
Attention!
For your safety, please read this manual thoroughly and use your light
accordingly.
Make sure the Light is mounted securely on the handlebar each time before
riding.
Release the bike light from the handlebar mount while in the outdoors in case
of theft.
To maintain the best performance and extending the life of the Lithium-ion
battery:
- Check the battery and charge the battery up before your first riding.
- Avoid completely discharging, allow partial discharges and avoid over charging (usually).
- Keep and storage your light at room temperature.
- Charge your light to 50% full every 3 months for long term storage.
Alert!
Don’t stare the light directly when on, otherwise it may cause temporally
blindness. For others’ safety, don’t shine the light directly to oncoming
vehicles and pedestrians. Keep the light away out of children’s reach and
children should be accompanied
by adults when using the light. Don’t disassemble or modify the light,
otherwise it may cause danger and void your warranty.
Danger!
Lithium-ion battery inside, don’t put the light in a fire, otherwise it may
cause explosion!
Please charge the light with qualified USB power adapter, using defective USB
power adapter may cause power leakage or fire disaster, etc. RAVEMEN is not
responsible for any of such consequences.
Warranty
We proudly claim and warrant our products free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the light to the place of purchase. If this happens within 15 days from the day of purchase, we will replace the defective product with a brand new one without extra charges: After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.
Warranty Exclusions:
- Without original sales receipt or proof of the purchase
- Normal wear and tear and normal battery deterioration
- Unauthorized modifications or alterations, improper use and maintenance
Website : www.ravemen.com
Tel/Fax : +86-755-29064166
Email : service@ravemen.com
Address: 501. Building A, Nanking 2nd Industrial Park, Bantian, Longing,
Shenzhen 518129, China
Thanks for purchasing RAVEMEN product. Important For your safety, read this manual thoroughly before using the product and keep it properly for future reference. Scan and like our Facebook page for more info and service:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>