BENEVE M55 Tablet PC User Guide
- June 13, 2024
- BENEVE
Table of Contents
BENEVE M55 Tablet PC User Guide
Device Overview
How to insert the micro SD card
To ensure that the Micro SD memory card can be used normally, please place the Micro SD card according the below steps.
- Open the Micro SD card plug
- Insert the Micro SD card silk-screened label upwards (screen direction)into the card slot
- When the Micro SD card slot makes a “click” sound, it means that the Micro SD card has been inserted in place
How to boot
Press the power button for 3-5 seconds to boot
Note: This product is a non-removable battery. When the battery is low
and cannot be tumed on, you need to connect the charger to charge for about
10-20 minutes and then press the power button to tum it on
Language switch setting
- In the APP interfacesetiings—system-language and input method-language–click “add language”.
- Select the language you need, and the system will automatically jump back to the “language” interface.
- Long press and hold the icon behind the added language bar, then drag it to the first position and release, the system will automatically switch languages.
Safety Precautions
In order to ensure the safe use of this product, please strictly abide by the
following rules.
- It is not advisable to put other items on the tablet device to avoid damage to the screen.
- hen not in use, it should be placed on a stable table to avoid damage to the body due to accidental falls
- When not in use for a long time, do not plug in the charger for a long time to charge.
- Avoid strong impact or squeeze on the equipment 8 Tryto avoid using it in a strong magnetic field and strong electrostatic environment
- The built-in electronic components are afraid of dampness and water, and they must be kept away from high temperatures, humidity, and dust. Please keep them in a dry place and avoid direct sunlight
- Once water or other liquid splashes on the tablet, it should be tumed off and wiped dry immediately.
- Do not use any chemical cleaners or other liquids to clean the machine to avoid corrosion and moisture damage. Please use a soft dry cloth or paper towel for cleaning.
- Please keep the tablet and accessories out of the reach of children, and do not allow children to use the tablet unattended
- When reading files on the Micro SD card, do not remove the Micro SD card to avoid damage to the memory card or data files. Back up your important data at any time to avoid loss.
FAQ
The tablet cannot be turned on
The tablet’s battery may be low. Please plug in the adapter to charge for 10
to 20 minutes and try to power it on again
The tablet cannot be charged
- The USB charging cable is defective. Try to replace the USB charging cable with a new one.
- If you still cannot charge after changing the USB charging cable, the charging adapter may be defective. Please try to replace the charging adapter with a new one
The tablet cannot recognize the Micro SD card
- Check if the slot and orientation of the Micro SD card are correct, and try to re-plug the Micro SD card
- If the Micro SD card still cannot be recognized, it is recommended to put the Micro SD card in another mobile phone, observe whether it can be recognized normally, and judge whether the Micro SD card has been damaged.
- If the Micro SD card cannot be recognized in the mobile phone where the Micro SD card is tested, it means that it has been damaged. Please replace the Micro SD card
- Ifitcan be recognized, please back up the content of the Micro SD card, format the Micro SD card, and then put it back into the tablet to seef it can be recognized normally.
Tablet PC cannot connect to WIFI
- Check if the WIF! signal is normal
- Check if the WIFI password is correct
- If the entered WIF password is correct, but cannot connect to the network, try restarting the wireless router
- If you still cannot connect, you can restart the tablet and try to connect again
how to do when the system crashes or slows down
- When the system or APP is stalled and there is no response from touching and there is no response from pressing the power button, please try to press the “Reset button” to force the restart of the tablet
- When the tablet’s files are full of storage space, the system may run APP very slowly. In this case, you can first backup the file data in the tablet, then exit the Google Account and boot the password, and restore the factory Settings.
Note: To restore factory Settings, please remove your Google Account and boot password first.If you forget your Google Account password and boot password and restore factory Settings without first removing your Google Account password and boot password, the tablet will not be able to access the system Google s a trademark of Google LLC.
support 1@ http://WWW.sungworld.com
Facebook Made in China