pulse UQ21101 Outdoor Wireless Lighting Speaker User Manual
- June 5, 2024
- Pulse
Table of Contents
**pulse UQ21101 Outdoor Wireless Lighting Speaker User Manual
**
What’s in the box?
Product Figure
- Light key
- Volume “+” / Next Song
- On/off
- Volume “_”/ Last song
- Play/Pause
- Reset Key
- TF Card
- Aux port
- Charging Port
- Charging indicator
Wireless connection
Long Press
Turn on the speaker and Enter pairing mode.
Lighting is running fast if wireless device not connected use the wireless
device to search for “UQ21101” and click to connect
Short press x1
Audio switch mode
Long press
Disconnect wireless device.
Light mode
Short press x1
Lighting effect switch
Music control
Short Press x1 Volume “-“/”+”
Long press Last/Next Song
Short press x1 Play/Pause
Answer the phone
Short press x1 Answer/Hang up
Long Press Reject call
Short press x2 Dial the last call
Audio Connection
0 Short Press x1 Audio switch Mode
When inserting Audio device, it will play the last insert one first.
Product charge
Red light on : The battery is charging.
Red light off: Fully charged
To preserve battery lifespan fully charge at least once every 45 days.
Specifications
| Model | CT02049 |
|---|---|
| Item number | UQ21101 |
| Wireless distance | 10m (Open distance) |
| Play time | Volume 100% 7H volume 50% 15H |
| Play Mode | BT/Aux/TF |
| Battery | 4000MAh/3.7v |
| Charging input | DC 5V-1A |
| Charging time | 4H |
| Frequency response | 20Hz – 20 KHz |
Charging and battery information
-
This product has a built- in non-removable and rechargeable battery.
Please use the equipped micro USB Cable to charge the battery. -
The charging current voltage is 5V/1A and the product can not be recharged with a charger of more than 5V/1A
-
Please choose the charger that passes the regular manufacturer’s safety certification
-
Repeated charging on the speaker will cause battery performance degradation overtime. which is a normal phenomenon for all rechargeable batteries.
Warning
Do not drop. disassemble deform modify or insert any object into this product as operating damage may result.
Do not attempt to repair modify or disassemble the product yourself.
this product does not contain any user serviceable components and my void the
warranty.
Do not clean the product with alcohol, ammonia base cleaners and abrasive cleaners.
Do Not place this product in to contact with any sharp objects as this may cause scratches and operating damage.
Do not attempt to replace the product battery it is built-in and is not user changeable.
Observe all signs and displays that require and electrical device or RF radio product to be switch off in designated areas.
Dispose of the product and the product’s battery in accordance with local laws and regulations.
Do not place put flame source near the product.
Use the specialized adapter for charging.
Avoid using in damp or corrosive environment.
Do not touch metal or short circuit electrode.
Warning
Changes or modification not expressly approved by the party responsible for
compliance compliance could void the user authority to operate the equipment
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement :
The device has been evaluated to meet general RF exposure requirement. The device can ben used in the portable exposure condition with restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>