PULSE-EIGHT P8-HDMI-SP2 Ultra HD Distribution and Control User Guide
- May 15, 2024
- PULSE EIGHT
Table of Contents
PULSE-EIGHT P8-HDMI-SP2 Ultra HD Distribution and Control
This installation guide helps you to install and use your Pulse-Eight neo 1-2
HDMI Splitter for the first time.
Go to help.pulse-eight.com for additional
information on this product including important technical information not
provided in this document and warranty terms & conditions.
CHECK WHAT’S INSIDE THE BOX
- 1 x neo:1-2 HDMI Splitter
- 1 x Power Supply Adapter
- 1 x Quick Start Guide
IMPORTANT
- Please read the instructions before attempting to install or operate this equipment.
- Visit help.pulse-eight.com to download the latest product manual, additional documentation, and configuration tools.
PANEL DESCRIPTIONS
A HDMI Output – Connect the appropriate high speed HDMI cable to each
output. These cables should then be directly connected to each Sink device.
(TV/Amplifier etc.)
B 5V DC is used with the supplied power adapter to connect the power.
C HDMI Input: Connect the appropriate high speed HDMI cable to the input.
This cable should then be connected to the Source device. (Blu-Ray player
etc.)
INSTALLATION
- Connect the HDMI cable from your video source (e.g. Blu-Ray player) to the HDMI input of the neo HDMI splitter.
- Connect sink devices directly (i.e. TV) to the HDMI Outputs via high speed HDMI cables.
- Insert the supplied power adapter to the neo HDMI splitter and plug it into the AC mains.
- Ensure the sink devices are powered on before powering on the splitter.
- Turn ON the AC mains.
SAFETY PRECAUTION
Please read the full manual instructions before attempting to install or
operate this equipment.
Please keep the following in mind as you unpack and install this equipment:
- Always follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- To prevent fire or shock hazards, do not expose the unit to rain, or moisture or install this product near water.
- Never spill liquid of any kind on or into this product.
- Where possible, install the splitter towards the top of the rack to avoid the unit overheating.
- Only use the supplied IEC cable.
- Never push any objects into this product through any openings or empty slots in the unit as you may damage parts inside and/or cause an electrical shock.
- Do not allow anything to rest on the power cabling and avoid putting the weight of any kind on it.
- To protect the unit from overheating do not block any vents or openings in the unit housing that provides ventilation. Allow sufficient space for air to circulate around the unit.
- This product is intended for use in a clean (dust-free) residential environment.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored
in a retrieval system, or any of its part translated into any language or
computer file, in any form or by any means (electronic, mechanical, magnetic,
optical, chemical, manual, or otherwise) without express written permission
and consent from the manufacturer.
© Copyright 2023. All Rights Reserved. Version 2.0 – June 2023
Pulse-Eight Limited, 8-12 Alder Hills, Poole, Dorset, BH12 4AL. UK support @pulse-eight.com www.pulse- eight.com +44 (0)1202 413 610