WYZE WLPA19V2 Smart Bulb User Guide
- June 5, 2024
- Wyze
Table of Contents
WLPA19V2 Smart Bulb
User Guide
WELCOME TO WYZE
Well, hello there! If this is your first Wyze product, welcome to the Wyze
family! Whether you bought Wyze Bulb White to control your lights by voice,
find the perfect ambiance, or improve your selfie game, you have made a great
choice. Now let’s get started!
IN THE BOX
Wyze Bulb White
Quick Start Guide
SETUP
- Download the Wyze app and sign in or create an account.
- Open the Wyze app and tap the + sign on the top left corner of the Home tab. Tap Add Device and then select Wyze Bulb White.
- Follow instructions in the app to complete setup.
Important:
- Make sure that the power is off when installing or removing the light bulb.
- Do not use this product with a dimmer (e.g. a desk lamp with a dimmer switch} to avoid damaging the product.
- Risk of electric shock – Do not use where directly exposed to water.
- Do not use in a narrow or poorly ventilated light fixture.
- Not for use in totally enclosed luminaires.
- Not for emergency lighting.
SPECIFICATIONS
Model: WLPA19V2
Size: 60 mm x 60 mm x 113 mm
Rated power: 9.5 Watts
Lumens: 30-800 Lumens
Base type: E26
Working voltage: AC 120V-60Hz
Color temperature: 2700K – 6500K
FCC ID: 2AUIUWLPA19V2
IC: 25466-WLPA19V2
Life expectancy: 25,000 Hours
Communication mode: 802.11b/g/n, 2.4 GHz Bluetooth
CONNECT TO YOUR VOICE ASSISTANT
To control your device with your voice, connect your Wyze account to Alexa or Google Assistant.
Alexa
-
Open up the Wyze opp, go into your Account settings, then tap on Smart Integrations to link Alexa to your Wyze account.
-
You can also link your Wyze account by asking Alexa to
“Enable Wyze skill.” If you have not downloaded the Alexa opp you can download it from the App Store or Google Play store or go to alexa.amazon.com to search for and enable the Wyze skill. -
Once enabled, follow the on-screen instructions to link your Wyze account to Alexa. You will be prompted to enter your Wyze username and password to authorize Alexa to access your device.
-
Select Add Device so that Alexa can find your device. You can also say, “Discover my devices.” After Alexa finds your device, it’s listed under Devices in the Smart Home section of the Alexa opp.
Google Assistant
-
Download & configure the
Home opp by Google. -
Launch the Home opp.
-
Tap Add.
-
Tap Set up device.
-
Tap Works with Google.
-
Find the Wyze Home listing & log in with your Wyze account.
-
Google Assistant will automatically sync and populate a list of the devices from your Wyze account.
FCC WARNING
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
ISEDC RSS WARNING
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISEDC RADIATION EXPOSURE STATEMENT
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
NEED HELP?
Scan the QR code to learn more
Contact our Support Team: https://support.wyze.com
Join our Community: https://wyze.com/community
https://support.wyzecam.com/hc/en-us
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>