L15 Smart Watch User Manual
- June 5, 2024
- Watch
Table of Contents
L15 Smart Watch
Thank you for choosing our product!
To have a comprehensive understanding and using this device, to know all the
features and simple operation method, please read this manual first.
The functions on the user manual may be little different with physical, please
make
the final products as the standard.
The typing errors in this manual and discrepancies will be timely updated with
the latest products. If we have updates, this manual will be subject to change
without notice. Our company reserves the right of final interpretation.
Package: One gift box, one user manual, one smart band unit.
Remark: The product supports waterproof with IP68 level, it is available
to wear it while wash hands, swim, in raining, etc.
Do not use it when have a hot shower/bath or sauna, the vapors will get into
the host, scratch damage of peripheral components. All these are beyond the
scope of the warranty.
Buttons Instruction
Top button: Power ON/OFF switch for long press the button; short press
the button to light the screen when screen off,
Bottom button: Flashlight turn ON/OFF
Touch instructions: Click enter; swipe right to return; slide down to
enter the status bar slide left to enter the notification center，slide right
to enter the main menu.
Changeable band: A switch at the connector between band and watch case,
push it to the middle to take off the existing band, same way to set a new
band.
Charging instruction: This product adopts magnetic pin charging.
Support within 5V phone charger and USB port socket. Put the charging pin connect to the back of the device charging pins to charge. It usually takes 2 hours to full charging, device standby time up to 30 days, 5-10 days for working. Do not use the watch when charging.
Caution: Do not make the magnetic charging cable any 2 pins connect with conducting material at same time, it may cause short circuit.
Watch connects to Phone, download the App “FitCloudPro” in the Phone at very first, reference following 2 methods:
- Android/iOS Phone: Scan following QR code image by browsers or by any Scanner to Download.
- Android Phone: search and download “FitCloudPro” app from Google Play; iOS phone: search and download “FitCloudPro” app from Apps Store;
After installation, turn on phone Bluetooth and FitCloudPro App, confirm the notifications and all others permission “FitCloudPro” asks are enabled, and fill up personal information. Tap “Add device”, search “L15” device (turn on the GPS in the smart phone before binding) and tap connect.
How to set the notification reminder: In “FitCloudPro” – Device – Notifications, select the corresponding Apps, turn ON the switch.
What should I do if I don’t receive the notifications?
- The watch’s notification only synchronous phone notifications from notification center, such as incoming calls, SMS, WhatsApp, WeChat etc., if the phone doesn’t receive notifications in notification center, then the watch cannot receive them either, it must set as phone able to receive notifications of the corresponding Apps, turn ON the notification permission in phone setting.
- If still not receiving any notification after step (1). Reset the watch to factory setting, enter the Bluetooth settings in the phone, and check if it’s connected device has “L15”. If so, please unpair, turn OFF the phone’s Bluetooth, then turn it ON again to reconnect.
- If all above 2 steps cannot solve the notification issue, uninstall the “FitCloudPro” and download it again. Remember agree all permissions App asks when the installation done and very beginning turn the App on, and then reconnect again.
Firmware upgrade: As Bluetooth connected, in “FitCloudPro”, Tap “Device-“Firmware version”- it will remind you if there’s a new version available for update. During the updating, it will show a process bar, wait it until complete. Watch will restart and reconnect the phone App. Do not operate the watch during the update. It takes 3-5 mins.
Main Features
-
Language/Time/Date：
Synchronizing of language/date/time between the mobile phone and the Smart Watch after being connected -
Standby watch faces: There are couples of watch faces for options, long press 2 seconds at home screen to switch different watch faces.
-
Status Bar:
Pull-down from the standby state screen. The following will be shown
Bluetooth connection status / battery status / brightness adjustment/ QR code for FitCloudPro download. -
Notifications:
Synchronizing and display of app notifications such as Facebook, WhatsApp, SMS, Email etc., between the mobile phone and the Smart Watch. Up to 8 notifications can be displayed on the watch. Please adjust the settings in the Fundo app and allow notifications to be displayed (app permissions). It is able to decline incoming calls via watch. -
Activity info:
Showing the workout and health data including Steps, Distance, Calories consumption. This data will be saved until midnight (12:00 am) every day and then reset to 0 values for coming day. You can look up previous data in History. -
Exercise:
Select a sports mode to record your workout. Tap this icon for more modes, tap center to enter, tap next/back page, tap return. The recording will be paused when pressing the power button. You can choose to save, delete or continue the measuring. Recording and saving the workout data.
Health
Heart Rate Monitoring Function:
When this function is activated, the heart rate is being measured by the
device scanning the surface capillary of the skin with green optical diodes.
Please allow for about 2 seconds to start measuring and recording. Slide to
other menus to stop measuring. Please refer to information about average heart
rate, heart rate while exercising for your age group and gender online and/or
ask your medical practitioner for advice.
Please note: The device is not a medical device. Any values shown are for
reference only.
Blood Pressure Function:
Please put your hands flat on a surface and do not move. When this function is
activated it needs about 45 – 50 seconds of measuring and reading to provide a
result
Please note: The device is not a medical device. Any values shown are for
reference only.
Electrocardiogram (ECG) Function:
The device combines an optical heart rate sensor and ECG sensor to show
information about the user’s heart function for reference. When this function
is activated it needs about 30 seconds of measuring and reading to provide a
result at the App to review.
Please note: The device is not a medical device. Any values shown are for reference only.
Blood Oxygen Function:
Blood oxygen (SP02H) level is the amount of oxygen circulating in the blood.
Please refer to information about healthy or abnormal blood oxygen percentage
for your age group and gender online and/or ask your medical practitioner for
advice.
Please note: The device is not a medical device. Any values shown are for
reference only.
-
Sleep monitor:
Sleep monitoring will be automatically active from 10:00pm to 8:00am the next morning. You can check the details of sleep quality with the Fundo app on the phone. -
Stopwatch Function:
Press the start and pause, again press for stop.
Remote Control (Music):
Allows to activate and control music playback on the phone via the Smart Watch
(a music playback app should be installed on the phone).
About: Check model number, Bluetooth address, version number
Reset: Tap to reset all data (factory mode).
Alarm Function: You can set several alarm times via the Fundo app on the
phone. Sedentary, drink reminder: Via the App set a time for exercise and/or a
reminder to drink.
Find Phone Function: As the device and phone are connected, the Find
Phone Function can support locating your mobile phone. Tap “Find Phone” and
locate your phone via the ringtone/sound coming from your phone.
Wrist Wakeup: You can “wake up” the watch with wrist movement. Please set
this function with the app. Please note that this might increase power
consumption.
Warranty Details
The manufacturer/distributor warrants the product to be free from defects in
workmanship for a period for 12 months from date of purchase. Defects that
will occur under normal use and care will be compensated, replaced or refunded
at our discretion.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable.
Please keep your purchase docket, tax invoice or receipt as the best proof of
purchase, and as proof of date on which the purchase was made.
IMEI code:
Buy store:
Customer signature:
Signature of Shop Assistant:
Shop Stamp:
Extent of Warranty
This warranty only covers defects in workmanship or parts. All defective
products or parts will be repaired or replaced. This warranty does not cover
batteries or any other consumable items.
Normal Wear and Tear
Normal wear and tear of the product or parts of the product is not covered by
this warranty.
Not Included in the Warranty Terms
This warranty does not include:
- Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the distributor.
- Any product that has not been installed, operated or maintained in accordance with the manufacturer ‘s instruction manual provided with the product.
- Any product that has been used for purposes other than the intended use.
- Any damage caused by improper power input or improper cable connection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>