GENiUS FIT WATCH V100S Smart Bracelet Health Monitoring Automatic Temperature Sports Wristband User Guide
- June 6, 2024
- GENiUS FIT WATCH
Table of Contents
GENiUS FIT WATCH V100S Smart Bracelet Health Monitoring Automatic
Temperature Sports Wristband
Description of appearance
-
Product Instructions
-
Remove Strap and Charge Mode
-
Packaging List
-
Wristband X1
-
Gift box X1
-
User manual X1
Initial Use Instructions
Introduction of equipment functional interfaces
The default display after turning on the device is time interface. Press the touch area and user can change between multiple functional interfaces.
APP Download to your smartphone
Searh for “Genius Fit” in APP Store for iOS users;
-
Or for “Genius Fit through Google Play, or APP vendor for Android users, Choose to ”register”. You will receive and email with the code to start
Renember to check the “junk” file if you do not receive it in a couple of minutes -
Pairing with your Genius Watch
Enter the APP. Under the plus sign “+” you will wnter the “settings” menu. Press “Device”. After sucessfully connecting the watch model, will be shown listed as “Device” in the APP’s screen. Also in the left top of the watch’s screen the sign “ ” will be present. Please reconnect if the sign “ ” is shown. -
Pairing Recommendations
-
Make sure the phone’s Bluetooth is turned on.
-
Make sure the watch has a fully battery and is turned on or charged before using.
-
Make sure the watch is within 50cm range while connecting with the phone. Once found, press on the image of the watch
-
If Android phone cannot find any watch through the APP, plese check if it allows “GeniusFit” to use Bluetooth in the Phone Permisssion Settings.
Introduction of Main Functions
Starting Up/Shutdown
To start up the watch, press the touch area for 3 seconds. The watch will enter into Time screen. After no manual operation for 5 seconds, the watch will go into standby mode. Switch to the Watch Shutdown screen and shut it down by pressing the touch area for 3 seconds.
Motion Monitoring
Click touch button, and access to the step, distance, calories screen on
sequence. Screen will be off if no operation is entered in 3 seconds.
Running Mode
On the running screen, long press to enter the running mode. While in running mode, to change between realtime running data, and pause and exit screens, click on the appropriate screen. The Data screens display running time, heart rate, running distance, calories, and steps in real time. While in the pause and exit screen, long press to pause or exit running mode.
Sleep Monitoring
On the Sleep Monitoring page, the watch displays overall Hours of Sleep for last night, and it will enter into standby mode after no manual operation for 3 seconds.
Manual Heart Rate Test and Automatic Monitoring
On the heart rate detection manual page, the watch will detect automatically. The watch will continuously capture data and will present those results constantly on the screen. After accumulating data for 60 seconds, the watch will enter the standby mode. The data displayed will not be saved. At the bottom of the heart rate screen on the APP, or under shortcut mode in the setting page, click the icon to detect heart rate manually. The users can find the Heart Rate icon on the APP interface. Tap the icon and the watch enters the manual Heart Rate Test Interface. While in this mode, the user can use the watch to test their heart rate manually by pressing “start”‘
The data tested through the watch will not be saved. Turn on the button for the 24 hours Automatic Heart Rate Test through APP under the Switch Setting sub-menu, then the watch will automatically capture the heart rate of the user every ten minutes and will present captured data every 10 minutes. After syncing, test results and details will be presented through the APP.
Manual, Automatic and Private Mode of Blood Pressure Testing Switching to manual blood pressure testing page will allow the watch to start testing automatically. The test time depends on proper detection It is normal for the test’s time to vary. The numerical display during the test is —/—.If there is no blood pressure result, the watch will display XXX/ XX. If this appears, please ensure that the sensor is close to the skin.
Please keep your body relaxed and still during the test. After 70 seconds of testing, the watch will enter into standby mode, regardless of whether results have been displayed. At the bottom of blood pressure screen on APP, or under shortcut mode in the setting page, click the icon to detect blood pressure manually. The user can choose General Mode or Private Mode to test and he can choose to save or discard the test results obtained through the APP.
Turn on the automatic blood pressure monitoring through the Switch Setting
sub-menu in the APP; The watch will automatically test blood pressure every
hour. After syncing, the results captured will be presented at the blood
pressure screen and are not valid for medical decisions. If the user has
acquired blood pressure results through professional medical instruments, she
can enter this data in the Private Mode of Blood Pressure of the APP as the
reference value for the watch to match upon the next measurement.
( Attention : to those users who are aware of their high blood presSure,
please take the reference blood pressure reading with a medical device before
treating blood pressure condition). To make sure the test result is valid,
please input the actual blood pressure value. It is not recommended to use the
blood pressure readings from the watch as any other reason than as a data
trend.
Phone Tracking
“Genius Fit” must be running in the background on the phone to use this
feature. To track the phone, the user must turn the watch Mode to “seek
phone.” A long press on the touch area will cause the phone to respond.
Stopwatch
The stopwatch function can be switched on using the Stopwatch function in the APP. under the “Device” menu. Once it is turned on, the watch will show the Stopwatch mode as one of the screens. While the stopwatch is running, tap on the touch area or continue the count. Another long press stops to pause the count. Attention: While in stopwatch mode, all reminders and pushed notifications will be temporarily blocked. The maximum time-count reaches up to 99 min 59 sec.
Count-Down
After starting the countdown function and time on APP, the watch starts
counting down by the timer set under the “timer’ menu under “Device”, and will
be reminded by vibration and show icon again while time’s up. The set time can
be changed by touching on the timer’s time display After setting the timer as
“on” on App, a sandglass icon will show as a shortcut on the “Settings”
display. On the watch’s countdown screen press the touch button for a long
time to start counting down automatically as per the timer set.
Alarm Clock and Events Reminder
Multiple alarms can be set through “Settings” in the APP. Snooze reminders for
the alarms can be set within the APP. This function can also add tags for
important things which are happening in the future. When set time arrives, the
device will vibrate and show those tags.
Notifications/Push
When a new message arrives, the device vibrates and the screen shows relevant
notifications and corresponding icons. Attention: please switch on APP
notifications first, Relevant communication tools should be set to allow
contents to be shown on the device screen.
Call reminder
The device will remind you with vibration when you have a Coming call. Short
press to mute, long press to reject the call
Sedentary reminder
This function can be turned on using the APP. The user can set a time value
for the warning. When the device detects that the user has sat or kept still
for the set time limit, the device will vibrate to remind the user to move
around.
Heart Rate Warning
Using the APP, the user can choose to turn on the heart rate warning and
preset the upper limit of their heart rate. If the device detects that the
user’s heart rate has reached or exceeded the preset value, it will vibrates
and display the following icon on th device screen
Remote Photograph
To use the device to take a remote photograph, the user can turn on the Camera
Mode in the APP’s “Device”‘ menu, then quickly shake the wrist to teke pics.
Waterproof
This device is water resistant and suitable for hands washing, rain or cold
shower, not suitable for plunge, dive or soak
Physiological Period Reminder
This feature can be used as a timely reminder of the user’s different
physiological states.
1) How to turn on the function?
Users can set the gender under her profile within the APP. If the gender is
female, the system reminds the user promptly to set up her physiological
period (if unnecessary then tap to skip). There are four statuses for the
female physiological period. They are “Period’, “Preparing for Pregnancy”,
“Pregnancy”, Postpartum’. User information and status will be saved in the
APP.
2) How to modify current physiological satus on user’s device?
On setting page, click the icon to access to female page, and modify the
setting. 3) How to change different physiological states?
Access to female page, click the icon on top right, then modify setting on
top.
You can share or export the Steps, Sleep, Heart Rate or Blood Pressure with friends In order to share your data with someone:
- Chose the parameter from the main screen in the APP (Heart Rate, Sleep, etc.)
- Touch the three dots at the bottom right of the screen (if in portrait mode) or on the top right (if in landscape mode and select.
- You can now select what app or program to use to send the information.
- Once selected just pick the recipient and send it or post it.
In addition to sharing via message you can also share your daily information with a training partner of friend(s) who also has the same APP automatically. This will give you the opportunity tO Compare your workout and activities resulting in automatic ranking of the information on a daily basis.
To do this:
- In the APP, under “Settings” press “Cared People”
- Press under the symbol with a person and the”+
- You can now look for the person by their cell phone contact or press Scan
- Scan the QR code of the person you wish to add (to see the QR code have your friend press their identification & photo space in their APP – under “Settings” and press on their code icon on the right. Your friend’s code will appear).
- Once scanned, your friend must respond positively in his APP to the request to share the information with you. Once your friend accepts you will receive a Confirmation that they accepted. After a minute or so your friend’s information Will appear under your added friend’s area (‘cared people) once you press on their image. Please note that this process also results in your information being shared with that friend.
Q & A
Q: What if an update fails?
A: If the initial upgrade fails, please reconnect the watch “Device’. The
system will automatically begin the update
Q:Why is the sleeping heart rate test result seems inaccurate?
A: The watch monitors human activities through electronic sensors, and
they are at the Consumer electronics level. It’s normal for certain ocasional
deviation.
Q: How to reset the permissions?
A: Android Phone -Settings Find “Genius Fit” Application – Set to “Trust
this software”.
- If the phone has a Security Management or Clean Up APP please add the “Genius Fit” application to the White List (Trusted List).
- In System Settings, under Permission Manager, set Genius Fit” as a trusted application in order to allow phone calls and incoming messages to be shown on the device display.
Q: How to set the time display?
A: The device will match the time display and language format of the
phone when synced
Q: How to reset the password?
A: Long press the touch area for 6 seconds while in the Sleep mode. The
device will vibrate and the password will be restored to ”0000”.
Specifications
- Chipset REALTEK8762CK
- Sensor STK8321
- Wight 25.6g
- Data Transfer Bluetooth 5.0
- Battery 150mAh Polymer lithium Battery
- Volume of Battery 150mAh
- Charging Voltage 100mA
- Charging Current 5V
- Working Temperature -5~45 C
- Waterproof Water Resistant
Device Requirements: Android 4.4/above: Bluetooth 4.0; iPhone 4S/above, iOS 9.0/above.