Kids 4G Smart Watch User Manual

Kids 4G Smart Watch
User Manual

The product user guide contains product features, how to use them, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Getting Started

Preparation Before Putting Into Operation
Check, if you have all accessories in the package.

• Instruction manual
• Charging cable
• EU charging adaptor
• Flat plastic tool
• SIM card adapter

Prepare the SIM card according to the following instructions.

• SIM cards must be in the NANO size (see the image below).
  

• The PIN code must be deactivated. You can deactivate the PIN when you insert the SIM card into your mobile phone.

• For the correct function of the device, internet and call services must be activated on the SIM card.

Note: Average data consumption of the device is about 100 MB per month. Ensure that the SIM card is fully compatible with 4G network.
Warning: If there is no data plan active or enough money on your prepaid card, the watch will rapidly discharge as it repeatedly tries to start the corresponding connection.
Location and communication services are not available.
Fully charge your device using supplied USB cable plugged into a power adapter. Do not use the fast charger or laptop USB port for charging! After a few moments, the screen will turn on automatically and you will see the charging indicator.
Before first use charges the device for at least 2 hours.

Inserting the SIM Card into Your Device

The device must be turned off before inserting the SIM card. You can turn it off by long pressing the side button. Use the adaptor that is part of your watch and insert the adaptor with the SIM card in the direction shown in the picture below.
Use the supplied flat tool to push the SIM card into the device until it clicks.

Turn on the Device
After the device is fully charged and the SIM card is inside, you can turn on the device using the turn on/turn off button. It takes approximately three minutes to load GSM or GPS signal. You can see the status icons in the top- left corner of the screen. It is possible that the GPS signal will not load inside the building. We recommend taking the device out before the first use.

Know Your Device

Pairing

Download the WowME Tracker app
Full functionality and all settings of the device are available in the WowME Tracker app. Use the following QR code to download the app or search WowME Tracker on App  Store or Play Store.

https://www.myaqsh.com/wowmetracker.html

Register Your Device

After the first registration in the app, you will be asked to register your device. Scan the QR code with the registration code or type in the registration number. You can find the registration number and the QR code on the back of the device or in the app. Then you can log into the app again and start using all its functions.

Device Functions

All settings are available in the WowME Tracker app or also directly in the menu of your device.

App Menu
All settings are listed below, and others can be selected in the WowME Tracker app.

Location Services
For the first use of the GPS watch, we recommend testing the device outdoors to ensure correct synchronization with the GPS position from satellites and get correct local coordinates in the WowME Tracker. Device tracking will be more accurate when you later bring it back inside.
If you control more devices in the WowME Tracker app (maximum of 50 devices on one account), you need to log out and log in again. All settings will be automatically updated regarding the possibilities of each device.
The device can track position in three modes:

• Normal mode (once every ten minutes)
• Saving mode (once an hour)
• Tracking mode (once a minute)

Chosen mode influences the battery consumption. For a basic overview of the location of your loved one, we recommend using longer update frequencies to ensure longer service of your device without charging. In saving mode, the battery life of the device is approximately two days, while in normal mode it lasts for about one day.
After clicking on the map on the main screen of the WowME Tracker app, you can see the position of your watch. You can check when this position was updated for the last time and what type of location service was used (GPS, WiFi, or LBS).
By pressing the manual location button (green mark, as seen in the screenshot below), you can manually refresh the real-time location. Firstly, you will get a quick update using GPS and after less than a minute you shall get a more accurate GPS position when available. If your device isn’t receiving a GPS signal, only the LBS location will be displayed. 

Types of Location Services Used by the Device

This device uses GPS, Wi-Fi, or LBS (localization using a GSM network) for location service.

• GPS determines position with accuracy up to five meters. Accuracy depends on the GPS signal which can be weakened in an environment with high trees or buildings. GPS  signal is usually not available when the device is indoors.
• Wi-Fi localization uses nearby Wi-Fi networks to determine its location which is based on the location listed in the public list of Wi-Fi networks.
• LBS uses a GSM network and depends on the density of signal towers of your mobile provider in your location. It is usually very inaccurate and in some areas location displayed by the WowME Tracker app can have differences varying between 200 and 500 meters.

Please see important information regarding using location services below:

• If you want to display only the accurate location of your device, you can turn off LBS usage in the WowME Tracker app. Please note that the watch will use only GPS which is not available indoors. It means that the watch will track changes of position only outside.
• If the device stops moving or shaking, the location service automatically activates standby mode to save the battery. The device will automatically update location only when the watch is in your hand, and you are moving.
• Location if Wi-Fi is dependent on data entered by an administrator of the Wi-Fi network. It can be inaccurate if the admin of the Wi-Fi network does not show correct information about their Wi-Fi location. This feature cannot be influenced by the device.

Safety Features

SOS Call
In the WowME Tracker app, you can set up three different SOS numbers. After long pressing the red button, the device will automatically dial the numbers in the selected order.
If nobody answers the phone, the device will try again after 30 to 40 seconds. This way it can dial up to two times per number. You can also set an SMS alert (see below) with information about SOS alerts.
Note: When the battery of the device is low, all functions are disabled, and the touch button doesn’t work to save the remaining battery capacity for SOS Call. The function of starting SOS Call with the side button is still active in the low-power mode.

SMS Alert
After making an SOS call, the device will automatically send a text message to chosen phone number with information about its location and time of the SOS alert. You can also set up an SMS alert for situations when the battery is low (below 20%).
Reject Unknown Calls
To protect device users from scammers and unrequested calls, you can set up rejecting unknown calls. If an unknown number (meaning not saved in the contact list of your watch) calls your device, you will receive a notification to the WowME Tracker app.
With the function “Retrieve watch SMS”, you can also read in SMS received on your device in the WowME Tracker app. It is useful for receiving verification codes or other important SMS messages.

Safety Zone
You can set up safety zones on the map. The device will automatically notify you when the user leaves the selected safe zone.

• Open “Safety Zone” on the map.
• Click on “+” in the bottom part of the screen.
• Find the map place where you want to set the safety zone and click on it.
• Type the name of the zone and set up the radius, then click on “OK”.
  Note: WowME Tracker enables three safety zones for each device. Ensure that safety zones don’t overlap with each other.

Disable Functions
If you do not want the device used to call other numbers than those saved in the Contact list, you can turn off access to the Dial Pad. You can also remotely turn off GPS to save the battery. The device uses only Wi-Fi network localization or inaccurate mobile network localization.
Remote Health Check
In the “Health” tab of the WowME Tracker app, you can remotely check the health of the device user.
You can see real-time information about physical activity (steps, calories burnt, and distance walked). Please note that this device does not substitute a medical device and all measured values are informative only.
Please take into account that the Steps function needs to be activated in the WowME Tracker app first (click on “Health” → “Steps” → “Switch”). Without activating this function,  you cannot access the steps count in the app or in your device. For the current measuring of calories or distance, please set also other information in the “Steps” menu including weight and average Step Length.

Other Functions

Night Power Saving
If you know that the device user doesn’t wear the watch while sleeping, you can set automatic power saving for the night time period.
Wi-Fi settings
To save battery and data consumption, you can manually set up Wi-Fi connections for networks where the device user often spends time in the same ways as you would do on your smartphone. This device also automatically uses all Wi-Fi networks to determine its location (uses all available Wi-Fi networks, not only those that you set up in the “Watch Wi-Fi Settings”).
Do Not Disturb
You can set different periods of the day when the watch will automatically switch into the Do Not Disturb mode (e.g., during school hours). The watch will automatically switch to silent mode and stop incoming calls.
Activity Schedule
In the WowME Tracker app, you can set up a timetable for school or other activities of your kids that can be displayed on the smartwatch if you want to remind it your child.

FAQ

The battery consumption of the device is too high. How can I make the device’s lifetime longer?

Battery consumption is mostly determined by location services. If the battery of your device is out sooner than you want, try a longer frequency of location updates. We recommend longer periods to save battery as you can always manually check the location in the WowME Tracker app and other services work without restriction (such as safety zones etc.). Battery consumption is also lowered by Wi-Fi usage when used instead of mobile data. Please set up a Wi-Fi connection in the WowME Tracker app or directly in the menu of your watch.

The device is offline in the WowME Tracker app.

The missing connection between the device and the WowME Tracker app can be caused by multiple problems. Please check that your device meets the following criteria:

• The battery of the device is charged.
  • PIN code of the SIM card is deactivated.
  • SIM card has an active data plan or enough money for pay-as-you-go data.

Location services are very inaccurate.

The accuracy of your device’s location services are depending on the method that is currently used in operation. It is determined by the following factors.
When outside, the device is using primarily GPS that is affected by the surrounding environment. GPS has weaker signals close to high buildings, trees, etc. If the GPS is not available or not loaded yet, the device will use LBS which determines location from the mobile network. This is dependent on the density of the signal towers network. You can turn off LBS localization in the WowME Tracker to keep more precise GPS localization only.
When indoors, GPS is not available. The device primarily uses LBS location which is very inaccurate. Location can be updated when the device connects to a nearby WiFi. If you want more accurate location service, please turn off LBS localization in the WowME Tracker. The device will show you the WiFi location and in case the WiFi is not available, it will show the last update of the outdoor GPS position.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
The subject of the declaration:
Title: GPS Tracker
Model / Type: D31
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 28.7.2021

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 /  EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• alza.at
• Alza | Alza.co.uk
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>