ADLER EUROPE AD 4078 Blender Cup User Manual
- June 5, 2024
- ADLER EUROPE
Table of Contents
AD 4078 Blender Cup
User Manual
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Do not insert fingers or any other objects into blender’s cup when the blender is on.
- In order to avoid injuries handle the blades carefully.
- Watch out for long hair, scarves, neckties hanging above the cup and operating components of device.
- For safety reasons use only original accessories and spare parts intended for particular blender type, available at authorized service center.
- Handle the blades with extreme care while disassembling accessories. The blades can cause cuts.
- Change the accessories only when the device is switched off. Disconnect the device from the power.
- Do not put any products other than food and liquids in the blender cup. Do not put hot products in the cup.
- The device is not suitable for whipping egg whites or kneading dough.
- Don’t use aggressive detergents to clean the housing, as it may remove the informational graphic symbols such as: scale, signs, safety marks, etc.
- Do not start the empty mixing cup, without product inside.
- MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 3 MINUTES. After 3 minutes of continuous operation stop the device and wait couple of minutes before restarting.
- Do not pour hot liquids (above 60 degrees Celsius) into the food processor.
- If the blades are blocked, always disconnect the power cable plug from the power socket before removing the blocking elements in the blender cup.
- Do not move the appliance during operation.
DEVICE DESCRIPTION
- 1A – cover
- 1D – blade
- 1B – jar lid
- 1C – blender jar
- 1E – drainage system
- 1F – speed adjustment knob
- 1G – 3 programs: smoothie, ice crush, pulse
DEVICE OPERATION
Before first use:
1. Remove all stickers from the housing, cup and cover of the blender.
2. Wash the device according to part CLEANING AND MAINTENANCE.
Blender operation:
- Put the blender main body (1H) on stable, level surface.
- Make sure the speed adjustment knob (1F) is set to the OFF position.
- Place the blender jar (1C) on the body (1H). Blender jar doesn’t have a position a lock. You can place it in any position on the blender body (1H) that you want.
- Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in the jar should not exceed marked level on the jar.
- Connect the power plug to the power outlet.
- Turn the blender on by moving speed adjustment knob (1F) to ON position. Program and knob lights will start flashing.
BLENDING WITH ADJUSTED SPEED
When processing different foods, you can use the rotating speed adjustment knob (1F) to choose first or second speed. Blender has overheat protection, the unit can stop automatically after working for 2 minutes continuously.
BLENDING WITH PROGRAMS
SMOOTHIE – if you want to stir, please rotate the speed adjustment knob to ON and press “SMOOTHIE” button. Blender will work for 3 seconds then stop for 1.5 seconds, after working for 3 cycles, it will keep working for 45 seconds then will stop automatically.
ICE CRUSH – if you want to crush ice, please rotate the speed adjustment knob to “ON” and press “ICE CRUSH” button. Blender will work for 3 seconds then stop for 1.5 seconds, after working for 10 cycles, it will stop automatically.
PULSE – please rotate the speed adjustment knob to ON and press “PULSE” button for a second. Blender will speed up. The unit will work when pressing the button.
7. Once mixed products have proper consistence, turn the blender off by moving speed adjustment knob (1F) to OFF position. Wait until the blades stop. Remove the power plug from the power outlet. Remove the cup.
NOTE: Always switch speed adjustment knob (1F) to OFF position if you want to change between programs and custom speed.
CLEANING AND MAINTENANCE
Make sure that the blender is disconnected from the power.
-
Wash the cups, covers and blades in water with washing-up liquid. In order to wash the cup thoroughly put some water with washing-up liquid in the cup, connect the blender to the power, and operate it for a short period of time in pulse mode. Then pour out the water, rinse thoroughly and dry.
NOTE: You can clean cover (1A), jar lid (1B) and blender jar (1C) in the dishwasher. Do not use dishwasher for cleaning the motor (1H) and blade (1D). -
Clean the stained body (1D) with moist cloth, and then wipe dry.
NOTE: Don’t immerse blender body in water or other liquids.
QUICK CLEAN
1. Fill the jar to half of its volume. Add a few drops of dishwashing liquid.
2. Turn speed adjusting knob to ON, then press the PULSE button several times
in a row.
3. Remove the jar (1C), empty and rinse under running water.
TECHNICAL DATA
- Maximum power: 1700W
- Nominal power: 800W
- Voltage: 220-240V ~50/60Hz
- Maximum continuous operation time: 2 minutes
- Minimum break time between work cycles: 5 minutes
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.